LNER Class J64

MSLR 0-6-0T
LNER Class J64
Type and origin
Power type Steam
Designer Hudswell Clarke
Builder Hudswell Clarke
Build date No.1 1904, No.2 1909,
No.3 1904
Total produced 3
Specifications
Configuration:
 ​
 • Whyte 0-6-0T
Gauge 4 ft 8 1⁄2 in (1,435 mm)
Driver dia. 3 ft 4 1⁄2 in (1.029 m)
Length No.1: 25 ft 6 in (7.77 m)
No.2: 25 ft 0 in (7.62 m)
Axle load No.1: 11.1 long tons (11.3 t)
No.2: 12.35 long tons (12.55 t)
Loco weight No.1: 29.15 long tons (29.62 t)
No.2: 28 long tons (28.45 t)
Fuel type coal
Fuel capacity No.1: 1.3 long tons (1.3 t)
No.2: 1.15 long tons (1.17 t)
Water cap No.1: 570 imp gal (2,600 l; 680 US gal)
No.2: 600 imp gal (2,700 l; 720 US gal)
Boiler pressure 140 psi (0.97 MPa)
Cylinders two inside
Cylinder size No.1: 13 3⁄4 in × 20 in (350 mm × 510 mm)
No.2: 13 in × 20 in (330 mm × 510 mm)
Performance figures
Tractive effort No.1: 11,110 lbf (49.4 kN)
No.2: 9,931 lbf (44.18 kN)
Career
Retired 1924-1929
Disposition All scrapped

The LNER Class J64 was a class of three 0-6-0T steam locomotives of the London and North Eastern Railway.[1]

They were built by Hudswell Clarke for the Mid-Suffolk Light Railway and were acquired by the LNER when it took over the Mid-Suffolk in 1924. Number 3 was withdrawn immediately and never received an LNER number. Nos. 1 and 2 were renumbered as LNER 8316 and 8317 respectively.

Dimensions

The dimensions for Nos. 1 and 2 are shown in the infobox (right). Dimensions for No. 3 are not known but it is believed to have been similar to No. 1, except that the cylinder bore was 14 inches.

Withdrawal

Withdrawal dates were:

None of the locomotives is preserved.

References

  1. ↑ "The Mid-Suffolk J64 0-6-0T Locomotives". The London & North Eastern Railway (LNER) Encyclopedia.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.