Juno Radiation Vault

Juno Radiation Vault (the box being lowered onto the partially constructed spacecraft) in the process of being installed on Juno, 2010
Juno Radiation Vault is shown attached, but with the top open and some of the electronics boxes inside the vault can be seen
The cube shaped JRV can be seen in between the un-wrapped main dish and the larger hexagonal main spacecraft body. Juno shake testing in November 2010
A chunk of processed titanium metal, the material of choice for the vault
Another depiction of titanium metal: a bar of titanium crystals
Jupiter's variable radiation belts are shown by these radio emissions from high-energy particles as detected by the Cassini-Huygens mission when it coasted by Jupiter in 2000 on its way to planet Saturn

Juno Radiation Vault is a compartment inside the Juno spacecraft that houses much of the probe's electronics and computers, and is intended to offer increased protection of radiation to the contents as the spacecraft endures the radiation environment at planet Jupiter.[1] The Juno Radiation Vault is roughly a cube, with walls made of 1 cm thick (1/3 of an inch) titanium metal, and each side having an area of about a square meter (10 square feet).[2] The vault weights about 200 kg (500 lbs).[3] Inside the vault are the main command and data handling and power control boxes, along with 20 other electronic boxes.[2] The vault should reduce the radiation exposure by about 800 times, as the spacecraft is exposed to an anticipated 20 million rads of radiation[1] It does not stop all radiation, but significantly reduces it in order to limit damage to the spacecraft's electronics.[2]

The vault has been compared being like "armor" or like a "tank", and the electronics within, like the spacecraft's "brain".[4] The power systems have been described as a "heart".[5]

Without its protective shield, or radiation vault, Juno’s brain would get fried on the very first pass near Jupiter
— Juno's PI[6]

The vault is one many features of the mission to help counter the high radiation levels near Jupiter, including an orbit that reduces time spent in the highest radiation regions, radiation-hardened electronics, and additional shielding on components.[3] The wires that lead out from the vault also have increased protection, they have a sheath of braided copper and stainless steel.[3] Some other components used tantalum metal for shielding in Juno, and while lead is known for its shielding effect it was found to be too soft in this application.[7] One reason that titanium was chosen over lead in this application was because titanium was better at handling launch stresses.[7]

The Ganymede orbiter proposal also included a design for a Juno-like radiation vault.[8] However, because the radiation is less at Jupiter's moon Ganymede and the orbiter's path, the vault would not have to be as thick, all else being similar.[8] One reason the radiation is strong at Jupiter, but confined to certain belts, is because it is generated by ions and electrons trapped in areas as a result of Jupiter's magnetic field.[9] Jupiter's magnetosphere is about 20,000 times as strong as Earth's and is one of the items of study by Juno.[10] (see also Juno's Magnetometer(MAG) instrument)

Another spacecraft with radiation shields was Skylab, which needed a radiation shield over a borosilicate glass window to stop it darkening, and several film vaults.[11] There were five vaults for photographic film aboard the Skylab space station, and the largest weighed 1088 kg (2398 lb).[12][11] Juno is the first time a spacecraft has a titanium vault for its electronics however.[13] Radiation hardening in general is an important part of spacecraft design when it is required, and the main processor of the Juno, the RAD750, has been used on other spacecraft where there are elevated radiation levels, and it is a radiation-hardened microprocessor.[13] For example, the RAD750 was also used on the Curiosity rover, launched November 26, 2011[14]

Juno is a space probe sent to Jupiter in 2011 and it entered orbit the night of July 4, 2016.[15] Juno is part of the New Frontiers program of NASA and was also built with some contributions by the Italian Space Agency (ASI).[15]

It was suggested by the publication Popular Science that the Europa Lander (NASA) may use a radiation vault like the Juno Jupiter orbiter.[16]

Inside the vault

There are least 20 different electronics boxes inside the vault, which is intended to reduce the amount of radiation they receive.[17]

Examples of components inside the vault:

JEDI and JunoCam do not have electronic boxes inside the vault.[24]

Radiation infographic

Infographic on radiation at Jupiter

See also

References

  1. 1 2 "Juno Probe Will Run Hellish Radiation Gauntlet at Jupiter Monday". Space.com. Retrieved 2017-01-08.
  2. 1 2 3 4 5 "NASA – Juno Armored Up to Go to Jupiter". www.nasa.gov. Retrieved 2017-01-06.
  3. 1 2 3 "NASA – Juno Armored Up to Go to Jupiter". www.nasa.gov. Retrieved 2017-01-08.
  4. ↑
  5. ↑ "How NASA's New Spacecraft Will Survive a Death-Defying Trip to Jupiter". Popular Mechanics. 2016-06-28. Retrieved 2017-01-08.
  6. ↑ Colorado Space News – Juno’s Armor
  7. 1 2 "Juno’s Armor | Colorado Space News". www.coloradospacenews.com. Retrieved 2017-01-06.
  8. 1 2
  9. ↑ "How NASA's New Spacecraft Will Survive a Death-Defying Trip to Jupiter". Popular Mechanics. 2016-06-28. Retrieved 2017-01-06.
  10. ↑ "How The Juno Spacecraft Will Survive Jupiter's Devastating Radiation". Popular Science. Retrieved 2017-01-06.
  11. 1 2
  12. ↑
  13. 1 2 3 Scharf, Caleb A. "The Jupiter Vault". Scientific American Blog Network. Retrieved 2017-01-06.
  14. ↑ NASA Launches Most Capable and Robust Rover to Mars
  15. 1 2 "The 10 Biggest Spaceflight Stories of 2016". Space.com. Retrieved 2017-01-08.
  16. ↑ "Here's what NASA's Europa lander could look like". Popular Science. Retrieved 2017-02-15.
  17. ↑
  18. 1 2 "Instrument Overview – Juno". spaceflight101.com. Retrieved 2017-01-06.
  19. ↑
  20. ↑
  21. ↑ Pingree, P.; Janssen, M.; Oswald, J.; Brown, S.; Chen, J.; Hurst, K.; Kitiyakara, A.; Maiwald, F.; Smith, S. (2008-03-01). "Microwave Radiometers from 0.6 to 22 GHz for Juno, A Polar Orbiter around Jupiter". 2008 IEEE Aerospace Conference: 1–15. doi:10.1109/AERO.2008.4526403.
  22. ↑ Key and Driving Requirements for the Juno Payload Suite of Instruments
  23. ↑ McComas, D. J.; Alexander, N.; Allegrini, F.; Bagenal, F.; Beebe, C.; Clark, G.; Crary, F.; Desai, M. I.; Santos, A. De Los (2013-05-25). "The Jovian Auroral Distributions Experiment (JADE) on the Juno Mission to Jupiter". Space Science Reviews: 1–97. ISSN 0038-6308. doi:10.1007/s11214-013-9990-9.
  24. 1 2 3 4 5 "Instrument Overview – Juno". spaceflight101.com. Retrieved 2017-01-08.
Wikimedia Commons has media related to Juno (spacecraft).
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.