Kibo (ISS module)

Japanese Experiment Module

The Japanese Experiment Module (JEM), nicknamed Kibo (きぼう, Kibō, Hope), is a Japanese science module for the International Space Station (ISS) developed by JAXA. It is the largest single ISS module. The first two pieces of the module were launched on Space Shuttle missions STS-123 and STS-124. The third and final components were launched on STS-127.[1]

Components

Kibō consists of six major elements: 1) Pressurized Module (PM), 2) Exposed Facility (EF), 3) Experiment Logistics Module-Pressurized Section (ELM-PS), 4) Experiment Logistics Module-Exposed Section (ELM-ES), 5) Japanese Experiment Module Remote Manipulator System (JEMRMS), and 6) Inter-orbit Communication System (ICS).[2]

Pressurized Module

Interior of the Pressurized Module

The Pressurized Module (PM) is the core component connected to the port hatch of the Node 2 Module. It is cylindrical in shape and contains twenty-three International Standard Payload Racks (ISPRs), ten of which are dedicated to science experiments while the remaining 13 are dedicated to Kibo’s systems and storage.[3] The racks are placed 6-6-6-5 along the four walls of the module. The end of the JEM-PM has an airlock and two window hatches. The Exposed Facility, Experiment Logistics Module and the Remote Manipulator System all connect to the pressurized module. Kibo is also the location for many of the press conferences that take place on board the station.

Exposed Facility

Exposed Facility

The Exposed Facility (EF), also known as "Terrace", is located outside the port cone of the PM (which is equipped with an airlock). The EF has 12 EFU (Exposed Facility Unit) ports that attach to PIU (Payload Interface Unit) connectors on EF-EEUs (EF-Equipment Exchange Units). All experiment payloads are fully exposed to the space environment. For proper functioning of these experiments, the payload requires an ORU (Orbital Replacement Unit) which consists of the EPS (Electrical Power System), CT (Communications & Tracking) and the TCS (Thermal Control System). Of the 12 ORUs, eight are replaceable by the JEMRMS while the other four are EVA-replaceable.

Experiment Logistics Module

Experiment Logistics Module, Pressurized Section

The Experiment Logistics Module (ELM) includes two sections:

Remote Manipulator System

The Remote Manipulator System (JEMRMS) is a 10m long robotic arm, mounted at the port cone of the PM, intended to service the EF and to move equipment from and to the ELM. The RMS control console was launched while inside the ELM-PS. The main arm was launched with the PM. The "Small Fine Arm", is 2m long and attaches to the end effector of the main arm, was launched aboard.[5] The free end of the JEMRMS is able to use the type of grapple fixtures that the Canadarm2 uses.[6]

Launch sequence

The EF and ELM-ES arrive at the Kennedy Space Center. (left) Technicians work on the Remote Manipulator System at KSC. (right)

NASA launched the JEM complex over three flights using the Space Shuttle. The shuttle had a large payload bay which carried the modules into orbit along with the crew. This is in contrast to the Russian modules, which are launched into orbit on multistage Proton rockets and then rendezvous and dock with the station automatically. On 12 March 2007, the Experiment Logistics Module Pressurized Section (ELM-PS), the main laboratory, arrived at the Kennedy Space Center (KSC) from Japan.[7] It was stored in the Space Station Processing Facility until launched into orbit aboard Space Shuttle Endeavour as part of the STS-123 mission.[8]

At first the ELM-PS, the small cargo bay, was connected to a temporary location on the Harmony module (Node 2) and later, on 6 June 2008, was moved to its final destination, or berthing location, on top (zenith) of the main laboratory. On 30 May 2003, the Pressurized Module (PM) arrived at KSC from Japan.[9] It was stored at the Space Station Processing Facility until launched into orbit aboard Space Shuttle Discovery as part of the STS-124 mission.[10] On 3 June 2008 the PM was attached to the Harmony module. The EF and ELM-ES arrived at KSC on 24 September 2008.[11] The Exposed Facility (EF) and ELM-ES were launched on STS-127, on 15 July 2009.[12] The ELM-ES was brought back to Earth at the end of the mission. The assembly of the EF was completed during the fifth spacewalk of the mission.[13]

Specifications

NASDA era graphic

Kibō is the largest single ISS module.

Current external experiments on Kibo

Deorbited with HTV-5:

Planned external experiments on Kibo

Looking alongside

Current internal experiments on Kibo

Looking forward at Kibo

Japanese:

American:

Planned internal experiments on Kibo

Parts

See also

References

  1. Kamiya, Setsuko, "Japan a low-key player in space race Archived 3 August 2009 at the Wayback Machine.", Japan Times, 30 June 2009, p. 3.
  2. "Archived copy". Archived from the original on 10 March 2009. Retrieved 2009-03-06.
  3. "NASA — Kibo Japanese Experiment Module". NASA.
  4. "STS-123 MCC STATUS REPORT #11". NASA. 16 March 2008.
  5. "Remote Manipulator System". JAXA. Archived from the original on 20 March 2008.
  6. http://iss.jaxa.jp/en/htv/mission/htv-1/presskit/htv-1_presskit.pdf pg19
  7. "Shipping of the Kibo ELM-PS, Kibo RMS and Kibo experiment racks". JAXA.
  8. "NASA's Shuttle Endeavour Begins Mission to the Space Station". NASA.
  9. "Kibo PM arrival in USA". JAXA.
  10. "NASA's Shuttle Discovery Launches With Japanese Laboratory". NASA.
  11. "Kennedy Media Gallery — PHOTO NO: KSC-08PD-2924". NASA. Archived from the original on 8 June 2011.
  12. "STS-127 mission page".
  13. William Harwood for CBS news (27 July 2009). "Endeavour crew completes fifth and final spacewalk". spaceflightnow.com. Retrieved 29 July 2009.
  14. "STS-124 Press Kit" (PDF). NASA.
  15. "STS-123 Press Kit" (PDF). NASA.
  16. "Monitor of All-sky X-ray Image: MAXI". JAXA. Archived from the original on 21 May 2013.
  17. "About the cooperation of JAXA and ASI in the development of CALET". JAXA. 10 June 2013. Retrieved 10 January 2014.
  18. The CALET project for investigating high energy universe
  19. "Superconducting Submillimeter-wave Limb-emission Sounder: SMILES". JAXA. Archived from the original on 28 September 2006.
  20. OCO-3 instrument

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.