Isopropyl acetate

Isopropyl acetate
Skeletal formula of isopropyl acetate
Ball-and-stick model of the isopropyl acetate molecule
Names
Preferred IUPAC name
Propan-2-yl acetate
Other names
Isopropyl acetate
2-Acetoxypropane
2-Propyl acetate
2-Propyl ethanoate
Propan-2-yl ethanoate
Identifiers
3D model (JSmol)
ChemSpider
ECHA InfoCard 100.003.238
UNII
Properties
C5H10O2
Molar mass 102.13 g·mol−1
Density 0.87 g/cm3
Melting point −73 °C (−99 °F; 200 K)
Boiling point 89 °C (192 °F; 362 K)
4.3 g/100 mL (27 °C)
Vapor pressure 42 mmHg (20°C)[1]
-67.04·10−6 cm3/mol
Hazards
F Xi
R-phrases (outdated) R11, R36, R66, R67
S-phrases (outdated) (S2), S16, S26, S29, S33
NFPA 704
Flammability code 3: Liquids and solids that can be ignited under almost all ambient temperature conditions. Flash point between 23 and 38 °C (73 and 100 °F). E.g., gasoline) Health code 1: Exposure would cause irritation but only minor residual injury. E.g., turpentine Reactivity (yellow): no hazard code Special hazards (white): no codeNFPA 704 four-colored diamond
3
1
Flash point 2 °C (36 °F; 275 K)
460 °C (860 °F; 733 K)
Explosive limits 1.87.8%
Lethal dose or concentration (LD, LC):
11,918 ppm (rat, 8 hr)[2]
US health exposure limits (NIOSH):
PEL (Permissible)
TWA 250 ppm (950 mg/m3)[1]
REL (Recommended)
None established[1]
IDLH (Immediate danger)
1800 ppm[1]
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
N verify (what is YesYN ?)
Infobox references

Isopropyl acetate is an ester, an organic compound which is the product of esterification of acetic acid and isopropanol. It is a clear, colorless liquid with a characteristic fruity odor.[3]

Isopropyl acetate is a solvent with a wide variety of manufacturing uses that is miscible with most other organic solvents, and moderately soluble in water. It is used as a solvent for cellulose, plastics, oil and fats. It is a component of some printing inks[4] and perfumes.

Isopropyl acetate decomposes slowly on contact with steel in the presence of air, producing acetic acid and isopropanol. It reacts violently with oxidizing materials and it attacks many plastics.[5]

Isopropyl acetate is quite flammable in both its liquid and vapor forms, and it may be harmful if swallowed or inhaled.[6]

The Occupational Safety and Health Administration has set a permissible exposure limit of 250 ppm (950 mg/m3) over an eight-hour time-weighted average for workers handling isopropyl acetate.[7]

References

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.