Interposer

BGA with an interposer between the integrated circuit die to ball grid array
Pentium II: example of an interposer, integrated circuit die to ball grid array chip carrier

An interposer is an electrical interface routing between one socket or connection to another. The purpose of an interposer is to spread a connection to a wider pitch or to reroute a connection to a different connection.[1]

Interposer comes from the Latin word "interpōnere", meaning "to put up between".[2]

A common example of an interposer is an integrated circuit die to BGA, such as in the Pentium II. This is done through various substrates, both rigid and flexible, most commonly FR4 for rigid, and polyimide for flexible.[1] Silicon and glass are also evaluated as an integration method.[3][4] Interposer stacks are also a widely accepted, cost-effective alternative to 3D ICs.[5]

Another example of an interposer would be the adapter used to plug a SATA drive into a SAS backplane with redundant ports. While SATA drives can be connected to nearly all SAS backplanes without adapters, an interposer would allow providing path redundancy.[6]

See also

References

  1. 1 2 Package Substrates/Interposers
  2. ↑ interposes - definition of interposes by the Free Online Dictionary, Thesaurus and Encyclopedia
  3. ↑ Silicon interposers: building blocks for 3D-ICs / ElectroIQ, 2011
  4. ↑ 2.5D Interposers; Organics vs. Silicon vs. Glass / Rao R. Tummala, ChipScaleReview Volume 13, Number 4, July-August 2013, pages 18-19
  5. ↑ J. Knechtel; et al. (2017). "Large-Scale 3D Chips: Challenges and Solutions for Design Automation, Testing, and Trustworthy Integration" (PDF). p. 17. Retrieved 2017-08-07.
  6. ↑ Willis Whittington (2007). "Desktop, Nearline & Enterprise Disk Drives" (PDF). Storage Networking Industry Association (SNIA). p. 17. Retrieved 2014-09-22.


This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.