ID3 algorithm

Potential ID3-generated decision tree. Attributes are arranged as nodes by ability to classify examples. Values of attributes are represented by branches.

In decision tree learning, ID3 (Iterative Dichotomiser 3) is an algorithm invented by Ross Quinlan^[1] used to generate a decision tree from a dataset. ID3 is the precursor to the C4.5 algorithm, and is typically used in the machine learning and natural language processing domains.

Algorithm

The ID3 algorithm begins with the original set $S$ as the root node. On each iteration of the algorithm, it iterates through every unused attribute of the set $S$ and calculates the entropy $H(S)$ (or information gain $IG(S)$ ) of that attribute. It then selects the attribute which has the smallest entropy (or largest information gain) value. The set $S$ is then split by the selected attribute (e.g. age is less than 50, age is between 50 and 100, age is greater than 100) to produce subsets of the data. The algorithm continues to recurse on each subset, considering only attributes never selected before.
Recursion on a subset may stop in one of these cases:

every element in the subset belongs to the same class (+ or -), then the node is turned into a leaf and labelled with the class of the examples
there are no more attributes to be selected, but the examples still do not belong to the same class (some are + and some are -), then the node is turned into a leaf and labelled with the most common class of the examples in the subset
there are no examples in the subset, this happens when no example in the parent set was found to be matching a specific value of the selected attribute, for example if there was no example with age >= 100. Then a leaf is created, and labelled with the most common class of the examples in the parent set.

Throughout the algorithm, the decision tree is constructed with each non-terminal node representing the selected attribute on which the data was split, and terminal nodes representing the class label of the final subset of this branch.

Summary

Calculate the entropy of every attribute using the data set $S$
Split the set $S$ into subsets using the attribute for which the resulting entropy (after splitting) is minimum (or, equivalently, information gain is maximum)
Make a decision tree node containing that attribute
Recurse on subsets using remaining attributes.

Pseudocode

ID3 (Examples, Target_Attribute, Attributes)
    Create a root node for the tree
    If all examples are positive, Return the single-node tree Root, with label = +.
    If all examples are negative, Return the single-node tree Root, with label = -.
    If number of predicting attributes is empty, then Return the single node tree Root,
    with label = most common value of the target attribute in the examples.
    Otherwise Begin
        A ← The Attribute that best classifies examples.
        Decision Tree attribute for Root = A.
        For each possible value,  $v i$ , of A,
            Add a new tree branch below Root, corresponding to the test A =  $v i$ .
            Let Examples( $v i$ ) be the subset of examples that have the value  $v i$  for A
            If Examples( $v i$ ) is empty
                Then below this new branch add a leaf node with label = most common target value in the examples
            Else below this new branch add the subtree ID3 (Examples( $v i$ ), Target_Attribute, Attributes – {A})
    End
    Return Root

Properties

ID3-generated decision tree used to determine whether a particular nucleotide pair within a pre-mRNA sequence corresponds to an mRNA splice site. This tree has been shown to have a 95% correct prediction rate.^[2]

ID3 does not guarantee an optimal solution; it can get stuck in local optima. It uses a greedy approach by selecting the best attribute to split the dataset on each iteration. One improvement that can be made on the algorithm can be to use backtracking during the search for the optimal decision tree.

ID3 can overfit to the training data. To avoid overfitting, smaller decision trees should be preferred over larger ones. This algorithm usually produces small trees, but it does not always produce the smallest possible tree.

ID3 is harder to use on continuous data. If the values of any given attribute is continuous, then there are many more places to split the data on this attribute, and searching for the best value to split by can be time consuming.

Usage

The ID3 algorithm is used by training on a dataset $S$ to produce a decision tree which is stored in memory. At runtime, this decision tree is used to classify new unseen test cases by working down the decision tree using the values of this test case to arrive at a terminal node that tells you what class this test case belongs to.

The ID3 metrics

Entropy

Entropy $H(S)$ is a measure of the amount of uncertainty in the (data) set $S$ (i.e. entropy characterizes the (data) set $S$ ).

H(S)=\sum _{x\in X}p(x)\log _{2}(1/p(x))

Where,

$S$ – The current (data) set for which entropy is being calculated (changes every iteration of the ID3 algorithm)
$X$ – Set of classes in $S$
$p(x)$ – The proportion of the number of elements in class $x$ to the number of elements in set $S$

When $H(S)=0$ , the set $S$ is perfectly classified (i.e. all elements in $S$ are of the same class).

In ID3, entropy is calculated for each remaining attribute. The attribute with the smallest entropy is used to split the set $S$ on this iteration. The higher the entropy, the higher the potential to improve the classification here.

Information gain

Information gain $IG(A)$ is the measure of the difference in entropy from before to after the set $S$ is split on an attribute $A$ . In other words, how much uncertainty in $S$ was reduced after splitting set $S$ on attribute $A$ .

IG(A,S)=H(S)-\sum _{{t\in T}}p(t)H(t)

Where,

$H(S)$ – Entropy of set $S$
$T$ – The subsets created from splitting set $S$ by attribute $A$ such that $S=\bigcup _{{t\in T}}t$
$p(t)$ – The proportion of the number of elements in $t$ to the number of elements in set $S$
$H(t)$ – Entropy of subset $t$

In ID3, information gain can be calculated (instead of entropy) for each remaining attribute. The attribute with the largest information gain is used to split the set $S$ on this iteration.

References

↑ Quinlan, J. R. 1986. Induction of Decision Trees. Mach. Learn. 1, 1 (Mar. 1986), 81–106
↑ Taggart, Allison J; DeSimone, Alec M; Shih, Janice S; Filloux, Madeleine E; Fairbrother, William G (2012-06-17). "Large-scale mapping of branchpoints in human pre-mRNA transcripts in vivo". Nature structural & molecular biology. 19 (7): 719–721. ISSN 1545-9993. PMC 3465671 . PMID 22705790. doi:10.1038/nsmb.2327.

Mitchell, Tom M. Machine Learning. McGraw-Hill, 1997. pp. 55–58.
Grzymala-Busse, Jerzy W. "Selected Algorithms of Machine Learning from Examples." Fundamenta Informaticae 18, (1993): 193–207.

External links

Seminars – http://www2.cs.uregina.ca/
Description and examples – http://www.cise.ufl.edu/
Description and examples – http://www.cis.temple.edu/
An implementation of ID3 in Python
An implementation of ID3 in Ruby
An implementation of ID3 in Common Lisp
An implementation of ID3 algorithm in C#
An implementation of ID3 in Perl
An implementation of ID3 in Prolog
An implementation of ID3 in C (This code is commented in Italian)
An implementation of ID3 in R

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.