Hudson Motor Car Company

Hudson Motor Car Company
Industry Automobile
Fate Merged
Successor American Motors Corporation (AMC)
Founded 1909
Defunct 1954
Headquarters Detroit, Michigan, United States
Key people
 Joseph L. Hudson, Roy D. Chapin
Products Vehicles

The Hudson Motor Car Company made Hudson and other brand automobiles in Detroit, Michigan, from 1909 to 1954. In 1954, Hudson merged with Nash-Kelvinator Corporation to form American Motors (AMC). The Hudson name was continued through the 1957 model year, after which it was discontinued.

Company strategy

1910 Hudson Model 20 Roadster
1917 Hudson Phaeton
1919 Hudson Phantom, 1919 photo

The name "Hudson" came from Joseph L. Hudson, a Detroit department store entrepreneur and founder of Hudson's department store, who provided the necessary capital and gave permission for the company to be named after him. A total of eight Detroit businessmen formed the company on February 20, 1909,[1] to produce an automobile which would sell for less than US$1,000 (equivalent to approximately $26,656 in today's funds[2]). One of the chief "car men" and organizer of the company was Roy D. Chapin, Sr., a young executive who had worked with Ransom E. Olds. (Chapin's son, Roy Jr., would later be president of Hudson-Nash descendant American Motors Corp. in the 1960s). The company quickly started production, with the first car driven out of a small factory in Detroit on July 3, 1909 at Mack Avenue and Beaufait Street, occupying the old Aerocar factory.[3]

The new Hudson "Twenty" was one of the first low-priced cars on the American market and very successful with more than 4,000 sold the first year. The 4,508 units made in 1910 was the best first year's production in the history of the automobile industry and put the newly formed company in 17th place industry-wide, "a remarkable achievement at a time" because there were hundreds of makes being marketed.[4] Because of this sales success a new plant was built on a 22-acre parcel at Jefferson Avenue and Conner Avenue in Detroit's Fairview section that was diagonally across from the Chalmers Automobile plant.[5] The land was the former farm of D. J. Campau. On 1 July 1926, Hudson's new $10 million body plant was completed where the automaker could now build the all-steel closed bodies for both the Hudson and Essex models. It was designed by the firm of renowned industrial architect Albert Kahn with 223,500 square feet and opened on October 29, 1910.[6] Production in 1911 increased to 6,486.[7] For 1914 Hudsons for the American market were now left hand drive.

The company had a number of firsts for the auto industry; these included dual brakes, the use of dashboard oil-pressure and generator warning lights, and the first balanced crankshaft, which allowed the Hudson straight-six engine, dubbed the "Super Six" (1916), to work at a higher rotational speed while remaining smooth, developing more power for its size than lower-speed engines. The Super Six was the first engine built by Hudson, previously Hudson had developed engine designs and then had them manufactured by Continental Motors Company. Most Hudsons until 1957 had straight-6 engines. The dual brake system used a secondary mechanical emergency brake system, which activated the rear brakes when the pedal traveled beyond the normal reach of the primary system; a mechanical parking brake was also used. Hudson transmissions also used an oil bath and cork clutch mechanism that proved to be as durable as it was smooth.

At their peak in 1929, Hudson and Essex produced a combined 300,000 cars in one year, including contributions from Hudson's other factories in Belgium and England; a factory had been built in 1925 in Brentford in London.[8] Hudson was the third largest U.S. car maker that year, after Ford Motor Company and Chevrolet.[9]

Essex and Terraplane

1929 Hudson Roadster
1929 Hudson Model R 4-Door Landau Sedan
1931 Hudson 4-Door Sedan
1934 Hudson Eight Convertible Coupé
1934 Hudson Terraplane K-coupe

In 1919, Hudson introduced the Essex brand line of automobiles; the line was originally for budget minded buyers, designed to compete with Ford and Chevrolet, as opposed to the more up-scale Hudson line. The Essex found great success by offering one of the first affordable sedans, and combined Hudson and Essex sales moved from seventh in the U.S. to third by 1925.[10]

In 1932, Hudson began phasing out its Essex nameplate for the modern Terraplane brand name. The new line was launched on July 21, 1932, with a promotional christening by Amelia Earhart. For 1932 and 1933, the restyled cars were named Essex-Terraplane; from 1934 as Terraplane, until 1938 when the Terraplane was renamed the Hudson 112. Hudson also began assembling cars in Canada, contracting Canada Top and Body to build the cars in their Tilbury, Ontario, plant. In England Terraplanes built at the Brentford factory were still being advertised in 1938.[11]

An optional accessory on some 1935-1938 Hudson and Terraplane models was a steering column-mounted electric gear pre-selector and electro-mechanical automatic shifting system, known as the "Electric Hand", manufactured by the Bendix Corporation. This took the place of the floor-mounted shift lever, but required conventional clutch actions. Cars equipped with Electric Hand also carried a conventional shift lever in clips under the dash, which could be pulled out and put to use in case the Electric Hand should ever fail. Hudson was also noted for offering an optional vacuum-powered automatic clutch, starting in the early 1930s.

Hudson Eight

For the 1930 model year Hudson debuted a new flathead inline eight cylinder engine with block and Crankcase cast as a unit and fitted with two cylinder heads. A 2.75 inch bore and 4.5 inch stroke displaced 218.8 cubic inches developing 80 HP at 3,600 RPM with the standard 5.78:1 Compression ratio. The 5 Main bearing Crankshaft had 8 integral counterweights, an industry first, and also employed a Lanchester vibration damper. Four rubber blocks were used at engine mount points. A valveless oil pump improved the Hudson splash lubrication system.

The new eights were the only engine offering in the Hudson line, supplanting the Super Six, which soldiered on in the Essex models.[6]

1936–1942

1938 Hudson 112 coupe
1939 Hudson Country Club Six Series 93 Convertible Coupé
1941 Hudson Coupé
Hudson dealer in Louisiana, ca. 1930-1945

In 1936, Hudson revamped its cars, introducing a new "radial safety control" / "rhythmic ride" suspension which suspended the live front axle from two steel bars, as well as from leaf springs. Doing this allowed the use of longer, softer leaf springs ("rhythmic ride"), and prevented bumps and braking from moving the car off course. The 1936 Hudsons were also considerably larger inside than competitive cars — Hudson claimed a 145-cubic-foot (4.1 m3) interior, comparing it to 121 cubic feet (3.4 m3) in the "largest of other popular cars." (According to United States Environmental Protection Agency (EPA) measurements, the cavernous Chrysler LHS only reached 126 cubic feet or 3.6 cubic metres) With the optional bulging trunk lid, the Hudsons could store 21 cubic feet (0.59 m3) of luggage (the LHS, 19 cubic feet or 0.54 cubic metres), though that might have been an optimistic measurement. The 1936 engines were powerful for the time, from 93 to 124 horsepower (69 to 92 kilowatts; 94 to 126 metric horsepower).

The 1939 models joined other American cars in the use of a column-mounted gearshift lever. This freed front-seat passenger space and remained the industry standard through the 1960s, when "bucket seats" came into vogue. Hudson became the first car manufacturer to use foam rubber in its seats. The Hudson Terraplane was dropped. For 1940 Hudson introduced coil spring independent front suspension, aircraft style shock absorbers mounted within the front springs and true center-point steering on all its models, a major advance in performance among cars in this price range. Despite all these changes, Hudson sales for 1940 were lower than 1939 and the company lost money again. The advent of military contracts the following year brought relief.

The 1941 Hudsons retained the front end styling of the 1940 models but the bodies were new with 5.5 inches added to their length giving more legroom. A new manual 3 speed syncromesh transmission was quieter with all helical gears. Wheelbases increased by 3 inches, with offerings of 116, 121 and 128 inches, and height was decreased with flatter roofs. Convertibles now had a power operated top. Big Boy trucks now used the 128 inch wheelbase. In 1942 in response to General Motors' Hydramatic automatic transmission, Hudson introduced its "Drive-Master" system. Drive-Master was a more sophisticated combination of the concepts used in the Electric Hand and the automatic clutch. At the touch of a button, Drive-Master offered the driver a choice of three modes of operation: ordinary, manual shifting and clutching; manual shifting with automatic clutching; and automatic shifting with automatic clutching. All this was accomplished by a large and complicated mechanism located under the hood. They worked well, and in fully automatic mode served as a good semi-automatic transmission. When coupled with an automatic overdrive, Drive-Master became known as Super-Matic. Re-engineering of the frame rear end to use lower springs reduced car height by 1.5 inches. Sheet metal "spats" on the lower body now covered the running boards and new wider front and rear fenders accommodated this.

Female designer

As the role of women increased in car-purchase decisions, automakers began to hire female designers.[12] Hudson, wanting a female perspective on automotive design, hired Elizabeth Ann Thatcher, who later became Betty Thatcher Oros, in 1939. A graduate of the Cleveland School of Arts (now Cleveland Institute of Art) with a major in Industrial Design, she became one of America's first female automotive designers.[13][14][15][16] Her contributions to the 1941 Hudson included exterior trim with side lighting, interior instrument panel, interiors and interior trim fabrics.[14] She designed for Hudson from 1939 into 1941, leaving the company when she married Joe Oros, then a designer for Cadillac. He later became head of the design team at Ford that created the Mustang.

World War II

Hudson Motor Car Co. factory in Detroit, circa 1930-1945

As ordered by the Federal government, Hudson ceased auto production from 1942 until 1945 in order to manufacture material during World War II, including aircraft parts and naval engines, and anti-aircraft guns. The Hudson "Invader" engine powered many of the landing craft used on the D-Day invasion of Normandy, June 6, 1944.

During World War II Hudson had also an aircraft division which produced ailerons for one large eastern airplane builder.[17][18] The plant was capable of large scale production of wings and ailerons as well as other airplane parts. On May 22, 1941, Hudson was given a contract for the Oerlikon 20 mm cannon with the Jefferson Avenue Plant, on Jefferson Avenue and Connor Avenue, responsible to convert the original Swiss drawings to American production standards.[19] The company produced 33,201 Oerlikons for the United States Navy with the original mechanism continued in use without major change and with complete inter-changeability of parts until the end of the war.[19] Hudson also manufactured millions of other weaponry and vehicle parts for the war effort. Hudson ranked 83rd among United States corporations in the value of World War II military production contracts.[20]

1946–1954

1947 Commodore Eight Convertible
1949 Hudson Commodore 4-Door Sedan
1952 Hudson
Hudson Hornet race car

Production resumed after the war and included a 128-inch (3,251 mm) wheelbase 3/4-ton pickup truck.[21]

In 1948, the company launched their "step-down" bodies, which lasted through the 1954 model year. The term step-down referred to Hudson's placement of the passenger compartment down inside the perimeter of the frame; riders stepped down into a floor that was surrounded by the perimeter of the car's frame. The result was not only a safer car, and greater passenger comfort as well, but, through a lower center of gravity, good-handling car. In time almost all U.S. automakers would embrace it as a means of building bodies. Automotive author Richard Langworth described the step-down models as the greatest autos of the era in articles for Consumer Guide and Collectible Automobile.

For the 1951 model year the 6 cylinder engine got a new block with thicker walls and other improvements to boost Horsepower by almost 18% and torque by 28.5% making Hudson a hot performer again. The GM-supplied 4 speed Hydramatic automatic transmission was now optional in Hornets and Commodore Custom 6s and 8s.

Hudson's strong, light-weight bodies, combined with its high-torque inline six-cylinder engine technology, made the company's 1951–54 Hornet an auto racing champion, dominating NASCAR in 1951, 1952, 1953, and 1954.

Herb Thomas won the 1951 and 1954 Southern 500s and Dick Rathmann won in 1952. Some NASCAR records set by Hudson in the 1950s (e.g. consecutive wins in one racing season) still stand even today. Hudson cars also did very well in races sanctioned by the AAA Contest Board from 1952 to 1954 with Marshall Teague winning the 1952 AAA Stock Car Championship and Frank Mundy in 1953. Often Hudsons finished in most of the top positions in races. Later, these cars met with some success in drag racing, where their high power-to-weight ratio worked to their advantage. Hudsons enjoyed success both in NHRA trials and local dirt track events.

As the post-war marketplace shifted from a seller's to a buyer's market the smaller U.S. automakers, such as Hudson and Nash, found it increasingly difficult to compete with the Big Three (Ford, GM and Chrysler) during the 1950s.[22] The sales war between Ford and General Motors conducted during 1953 and 1954 had left little business for the much smaller "independent" automakers trying to compete against the standard models offered by the domestic Big Three.[23] The Big Three could afford constant development and styling changes, so that their cars looked fresh every year, whereas the smaller manufacturers could only afford gradual change. Hudson's once innovative "step-down" unit body construction, while sturdy and innovative, also made restyling difficult and expensive. Although Hudsons dominated racing during this period, their feats did little to affect showroom traffic. Sales fell each year from 1951 to 1954 and only Korean War military contracts kept the company afloat. On March 20, 1954, the Hudson Motor Car Company reported a loss of $10,411,060 in 1953 as compared with a profit of $8,307,847 in 1952.[24] After the company's high-priced Jet compact car line failed to capture buyers in its second straight year, Hudson was acquired by Nash-Kelvinator (makers of Nash and Rambler) automobiles in 1954.

1954–1957

1951 Hornet Club Coupé
1957 Hornet Series 80 4-Door Sedan

On May 1, 1954, Hudson merged with Nash-Kelvinator Corporation to become American Motors. The Hudson factory, located in Detroit, Michigan, was converted to military contract production at the end of the model year, and the remaining three years of Hudson production took place in Kenosha, Wisconsin.

For 1955, both Hudson and Nash senior models were built on a common automobile platform using styling themes by Pinin Farina, Edmund E. Anderson, and Frank Spring. Common-body shell production for competing makes of automobiles was a manufacturing technique that had been used by the Big Three for decades. Although the 1955 Hudson used the inner body shell of the Nash, the car incorporated a front cowl originally designed by Spring and the Hudson team to be put on the 1954 Step-Down platform. The 1955 models also used the Hudson dashboard, "triple safe brakes" and Nash Weather Eye heater with Harrison Radiator Corporation-supplied lower cost Freon/compressor type air conditioning.

Hudson dealers also sold Rambler and Metropolitan models under the Hudson brand. When sold by Hudson dealers, both cars were identified as Hudson vehicles via hood/grille emblems and horn buttons. Hudson Ramblers also received "H" symbols on fuel filler caps (and, in 1956, also on hubcaps). For 1957, Rambler and Metropolitan became makes in their own rights, and no longer were identified as Hudson or Nash.

For 1956, design of the senior Hudsons was given over to designer Richard Arbib, which resulted in the "V-Line" styling motif, a combination of "V" motifs that carried Hudson’s triangular corporate logo theme. Sales fell below 1955 figures. For 1957, Hudson dropped the shorter-wheelbase Wasp line, selling only the Hornet Custom and Super, which featured a lowered profile and slightly updated styling.

With a wider front track than Nash used, Hudson was the better handling car, and was powered by the famed 308 cu in (5.0 L) Hornet Six with the optional high-compression cylinder head and dual-carburetor manifold ("Twin-H Power"); the Twin H would disappear at the end of the 1956 model year.[25]

The Wasp used the 202 cu in (3.3 L) L-head Jet Six engine (up to 130 hp (97 kW)) and this model (in sedan version) was Hudson's top seller. For 1955, for the first time Hudson offered a V8 engine, a Packard-designed and -built[26] 320 cu in (5.2 L) engine rated at 208 hp (155 kW) purchased by Hudson and Nash. All cars with the Packard V8 also used Packard's Ultramatic automatic transmission.[27][28] as an option costing $494 (equivalent to approximately $4,352[2]);[26] the Nash 3-speed manual was also available at US$295.[29]

End of the line

The last Hudson rolled off the Kenosha assembly line on June 25, 1957. There were no ceremonies, because at that point there was still hope of continuing the Hudson and Nash names into the 1958 model year on the Rambler chassis as deluxe, longer-wheelbase senior models. The combined Nash and Hudson production volume was not sufficient to justify all new design and tooling, so the Rambler's platform was expected to be adopted to the longer cars.[30] One major trade magazine said rumors of discontinuance were false and the 1958 Hudsons and Nashes "would be big and smart". Factory styling photographs show designs for a 1958 Hudson (and Nash) line based on a longer-wheelbase 1958 Rambler. Front-end prototype photos show separate Hudson and Nash styling themes.[31]

AMC's President George W. Romney came to the conclusion that the only way to compete with the "Big Three" (General Motors, Ford, and Chrysler) was to stake the future of AMC on a new smaller-sized car line.[32] Neither Hudson nor Nash brand names had as much positive market recognition as the successful Rambler and their sales were lagging. Together with AMC's chief engineer Meade Moore, Romney had completely phased out the Nash and Hudson brands at the end of 1957. The decision to retire the brands came so quickly that preproduction photographs of the eventual 1958 Rambler Ambassador show both Nash- and Hudson-badged versions. The Rambler brand was selected for further development and promotion while focusing exclusively on compact cars.[33]

Eventually, however, something close to the Hudson design was chosen for the 1958 Rambler Ambassador. Hudson brand enthusiasts will note the triangular grille guard and 1957-like fender "gun sights" and the fast-selling 1958 Rambler Customs wore 1957 Hudson-styled front-fender trim.

South Africa

Panel delivery van, Hostetler collection, Gilmore Car Museum

Hudson cars were assembled from complete knock down (CKD) kits in South Africa by Stanley Motors in Natalspruit (Gauteng).[16]

Legacy

For the 1970 model year, American Motors revived the "Hornet" model name for its new series of compact cars (the AMC Hornet). AMC was later purchased by Chrysler, which at one time considered reintroducing the Hornet name in the Dodge model line (See: Dodge Hornet).

The last Hudson dealership in the world was Miller Motors in Ypsilanti, Michigan,[34] which is now part of the Ypsilanti Automotive Heritage Museum.

A collection of restored Hudson cars is located at the Hostetler Hudson Auto Museum in Shipshewana, Indiana.[35] Eldon Hostetler was an inventor who had a Hudson as a teenager and later started buying Hudson cars and restoring them.[36]

A restored Hudson Dealership sign still occupies its original site on Highway 32 in Chico, California.[37]

The 2006 film, Disney/Pixar's Cars, features a character named Doc Hudson, represented as a 1951 Hudson Hornet.

References

  1. ↑ Burton, Clarence M., ed. (1922). The City of Detroit, Michigan, 1701-1922. S. J. Clarke Publishing. p. 583.
  2. 1 2 Federal Reserve Bank of Minneapolis Community Development Project. "Consumer Price Index (estimate) 1800–". Federal Reserve Bank of Minneapolis. Retrieved January 2, 2017.
  3. ↑ MCG (25 July 2013). "Still standing: the Aerocar/Hudson plant".
  4. ↑ "Hudson Motors". Cars & Parts. 42: 64. 1999. Retrieved 14 February 2015.
  5. ↑ MCG (25 July 2013). "Still standing: the Aerocar/Hudson plant".
  6. 1 2 Butler, Donald F. (1982). The History of Hudson. Motorbooks International. ISBN 9780879386962.
  7. ↑ Long, John C.; Hyde, Charles K. (2004). Roy D. Chapin: the man behind the Hudson Motor Car Company. Wayne State University Press. p. 98. ISBN 978-0-8143-3184-2. Retrieved 19 April 2013.
  8. ↑ "Ealing and Brentford: Economic history". A History of the County of Middlesex. Victoria County History. 7: 131–144. 1982. Retrieved 19 February 2016.
  9. ↑ Poremba, David Lee (2003). Detroit: A Motor City History. Arcadia Publishing SC. p. 116. ISBN 978-0-7385-2435-1. Retrieved 19 February 2016.
  10. ↑ Georgano, G.N. (2002). Cars: Early and Vintage, 1886-1930. Mason Crest Publishers. ISBN 978-1-59084-491-5.
  11. ↑ Greater London Council, The West London Report, London: Greater London Council, circa 1983.
  12. ↑ Lamm, Michael; Holls, Dave (1996). A Century of Automotive Style: 100 Years of American Car Design (Second ed.). Lamm-Morada Publishing. p. 193. ISBN 9780932128072. Retrieved 19 February 2016.
  13. ↑ Studebaker hired Helen Dryden to design the 1936 President.
  14. 1 2 "Obituary Elizabeth Anna (Betty) Oros" (in Romanian). biserica.org. 2001. Retrieved 19 February 2016.
  15. ↑ "A Moment With Joe & Betty Oros". Mustang Monthly. 24 June 2009. Retrieved 19 February 2016. archived at: archive (period) is/VMuM
  16. 1 2 "Hudson Commodore Six: The History". South Africa: Franschhoek Motor Museum. Archived from the original on 20 February 2012. Retrieved 19 February 2016.
  17. ↑ Herman, Arthur. Freedom's Forge: How American Business Produced Victory in World War II. Random House. pp. 114, 298, 310. ISBN 9781400069644.
  18. ↑ "Hudson ships ailerons". Milwaukee Sentinel. 15 May 1941. p. 5. Retrieved 19 February 2016.
  19. 1 2 "20mm Antiaircraft Gun Chapter V". HyperWar Foundation. Retrieved 19 February 2016.
  20. ↑ Peck, Merton J.; Scherer, Frederic M. (1962). The Weapons Acquisition Process: An Economic Analysis. Harvard Business School. p. 619.
  21. ↑ Vance, Bill (22 May 2009). "Motoring Memories: Hudson Trucks, 1914–1957". Autos Canada. Retrieved 19 February 2016.
  22. ↑ Auto Editors of Consumer Guide (5 September 2007). "1956-1957 Rambler". auto.howstuffworks.com. Retrieved 19 February 2016.
  23. ↑ Flammang, James M. (1994). Chronicle of the American automobile: over 100 years of auto history. Publications International. p. 278. ISBN 978-0-7853-0778-5. Retrieved 19 February 2016.
  24. ↑ Associated Press, "$10,411,060 Loss Reported by Hudson", The Sun-Telegram, San Bernardino, California, Sunday 21 March 1954, Volume VII, Number 50, page 1.
  25. ↑ Flory, Jr., J. "Kelly" (2004). American Cars, 1960-1972: Every Model, Year by Year. McFarland. p. 700. ISBN 978-0-7864-1273-0.
  26. 1 2 Flory, p. 672.
  27. ↑ Kimes, Beverly Rae; Clark, Henry Austin, Jr., eds. (1985). The Standard Catalogue of American Cars 1805-1942 (Second ed.). Krause Publications. ISBN 978-0-87341-111-0.
  28. ↑ Dawes, Nathaniel D. (1975). The Packard: 1942-1962. A. S. Barnes. ISBN 978-0-498-01353-9.
  29. ↑ Flory, p.672.
  30. ↑ Railton, Art (April 1957). "Detroit Listening Post". Popular Mechanics. 107 (4): 99. Retrieved 19 February 2016.
  31. ↑ Hyde, Charles K. (15 November 2009). "Storied Independent Automakers: Nash, Hudson, and American Motors". Wayne State University Press – via Google Books.
  32. ↑ "Gamble on the Rambler". Time. 19 December 1955. Retrieved 19 February 2016.
  33. ↑ Auto Editors of Consumer Guide (28 August 2007). "1950–1952 Rambler: The Low-Priced Rambler". auto.howstuffworks.com. Retrieved 19 February 2016.
  34. ↑ Blumberg, George P. (11 April 2003). "Driving; Hudsons Survive. The Dealer Does, Too". The New York Times. Retrieved 19 February 2016.
  35. ↑ "Attractions in LaGrange County". backroads.org. Retrieved 19 February 2016.
  36. ↑ "A Driving Passion". Hostetler's Hudson Auto Museum. Retrieved 19 February 2016.
  37. ↑ avidCommish10 (11 November 2011). "Old Hudson Dealership Sign, Walnut St, Chico, CA.". Flickr. Retrieved 14 February 2015.

Coordinates: 42°22′21″N 82°57′33″W / 42.372380°N 82.959123°W / 42.372380; -82.959123

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.