Hard Disk 20SC

Hard Disk 20SC

Model Number: M2604
Connects to	Macintosh Plus; Macintosh SE; Macintosh II via: Direct Connection Apple IIe; Apple 2GS via: Apple IIGS
Design firm	Apple Inc.
Manufacturer	Apple Inc.
Introduced	September 1986 (1986-09)
Discontinued	1989
Cost	US$1,299 (equivalent to $2,838 in 2016)[1]
Type	Hard Disk
Memory	20 MB
Connection	Direct
Ports	SCSI DB-25 x2
Power consumption	30 W
Weight	9 lbs (4 kg)
Dimensions	3.1 x 9.7 x 10.5 (inches) 78.5 x 246 x 266 (mm)

The Apple Hard Disk 20SC (not to be confused with the Apple Macintosh Hard Disk 20, the first hard drive manufactured by Apple Computer exclusively for the original Macintosh floppy disk drive port interface) is Apple's first SCSI based hard drive for the Apple II family as well as the Macintosh and other third party computers using an industry standard SCSI interface.

History

Released in September 1986 along with the Apple IIGS (which required an optional SCSI interface card to use it), it debuted over 9 months after the introduction of the Macintosh Plus, the first to include Apple's SCSI interface. It was a welcome addition, delivering considerably faster data transfer rates (up to 1.25 megabytes per second)^[2] than its predecessors, the Hard Disk 20 (62.5 Kilobytes per second)^[3] and ProFile.^[4]

Hardware

The 20SC originally contained a half height 5.25" Seagate ST-225N 20MB SCSI hard drive, but was later manufactured with a full-height 3.5" MiniScribe 8425SA 20MB SCSI hard drive. The latter drive was the same size as the drive inside the Macintosh Hard Disk 20, but 10 to 15 MB over what had previously been offered by Apple for the II family. The same drive mechanism would also be offered 6 months later as a built-in drive option on the Macintosh II and SE. It had two standard Centronics 50-pin connectors, one for the System and one for daisy-chaining additional SCSI devices and a SCSI ID selection switch. An external terminator was required if it was the only SCSI device connected. The case itself could accommodate a 3.5" or 5.25" full-height hard drive mechanism. Indeed, the case design would be reused unchanged (in Platinum only) for 3 more models introduced the following year: 40SC, 80SC & 160SC (offering respective Megabytes of storage). While the transfer rates were significantly higher due to the faster SCSI bus technology, the actual transfer rate varied from computer to computer thanks to different SCSI implementation based on developing industry standards.^[5]

Design

In addition to being the first cross-platform drive offered by Apple it was the first hard drive to use the Snow White design language. Notably, it was the only Snow White product to use the Macintosh beige color and one of the few Apple products to be introduced in two different colors at the same time. Since the Apple IIGS was the first Apple product to debut in the new gray color they called Platinum, the 20SC had to both match it and the beige color of the Macintosh Plus, which it is designed to sit perfectly beneath. In 1987, all Apple products would change to Platinum, which would remain in use for the next 10 years.

References