Handle

A handle is a part of, or attachment to, an object that can be moved or used by hand. The design of each type of handle involves substantial ergonomic issues, even where these are dealt with intuitively or by following tradition. Handles for tools are an important part of their function, enabling the user to exploit the tools to maximum effect.

A modern claw hammer with rubber handle

General design criteria

Flat-nose pliers with thermoplastic handles

The three nearly universal requirements of are:

  1. Sufficient strength to support the object, or to otherwise transmit the force involved in the task the handle serves.
  2. Sufficient length to permit the hand or hands gripping it to reliably exert that force.
  3. Sufficiently small circumference to permit the hand or hands to surround it far enough to grip it as solidly as needed to exert that force.

Specific needs

Other requirements may apply to specific handles:

Pull handles

Many drawers use pull handles.

One major category of handles are pull handles, where one or more hands grip the handle or handles, and exert force to shorten the distance between the hands and their corresponding shoulders. The three criteria stated above are universal for pull handles.

Many pull handles are for lifting, mostly on objects to be carried.

Horizontal pull handles are widespread, including drawer pulls, handles on latchless doors and the outside of car doors. The inside controls for opening car doors from inside are usually pull handles, although their function of permitting the door to be pushed open is accomplished by an internal unlatching linkage.

Pull handles are also a frequent host of common door handle bacteria such as e-coli, fungal or other viral infections.[1]

Two kinds of pull handles may involve motion in addition to the hand-focused motions described:

Twist handles

Many doors use twist handles.

Another category of hand-operated device requires grasping (but not pulling) and rotating the hand and either the lower arm or the whole arm, about their axis. When the grip required is a fist grip, as with a door handle that has an arm rather than a knob to twist, the term "handle" unambiguously applies. Another clear case is a rarer device seen on mechanically complicated doors like those of airliners, where (instead of the whole hand moving down as it also rotates, on the door handles just described) the axis of rotation is between the thumb and the outermost fingers, so the thumb moves up if the outer fingers move down.

Handles for wide-range motion

The handles of bicycle grips, club-style weapons, shovels and spades, axes, hammers, mallets and hatchets, baseball bats, rackets, golf clubs, and croquet mallets involve a greater range of ergonomic issues.

References

  1. Door Handles Can Spread Germs retrieved November 2016
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.