Electroscope

Gilbert's versorium.

An electroscope is an early scientific instrument that is used to detect the presence and magnitude of electric charge on a body. It was the first electrical measuring instrument. The first electroscope, a pivoted needle called the versorium, was invented by British physician William Gilbert around 1600.[1] The pith-ball electroscope and the gold-leaf electroscope are two classical types of electroscope that are still used in physics education to demonstrate the principles of electrostatics. A type of electroscope is also used in the quartz fiber radiation dosimeter. Electroscopes were used by the Austrian scientist Victor Hess in the discovery of cosmic rays.

Electroscopes detect electric charge by the motion of a test object due to the Coulomb electrostatic force. Since the electric potential or voltage of an object with respect to ground equals its charge divided by its capacitance to ground, an electroscope can be regarded as a crude voltmeter. However, the accumulation of enough charge to detect with an electroscope requires hundreds or thousands of volts, so electroscopes are only used with high-voltage sources such as static electricity and electrostatic machines. Electroscopes generally give only a rough, qualitative indication of the magnitude of the charge. An instrument that measures charge quantitatively is called an electrometer.

Pith ball electroscope from the 1870s, showing attraction to charged object
How it works

Pith-ball electroscope

The pith-ball electroscope, invented by British schoolmaster and physicist John Canton in 1754,[2] consists of a small ball of lightweight nonconductive substance, originally a spongy plant material called pith, although modern electroscopes frequently use plastic balls. The ball is suspended by a silk thread from the hook of an insulated stand. In order to test the presence of a charge on an object, the object is brought near to the uncharged pith ball.[3] If the object is charged, the ball will be attracted to it and move toward it.

The attraction occurs because of induced polarization[4] of the atoms inside the pith ball.[5][6][7][8] The pith is a nonconductor, so the electrons in the ball are bound to atoms of the pith and are not free to leave the atoms and move about in the ball, but they can move a little within the atoms. See diagram at right. If, for example, a positively charged object (B) is brought near the pith ball (A), the negative electrons (blue minus signs) in each atom (yellow ovals) will be attracted and move slightly toward the side of the atom nearer the object. The positively charged nuclei (red plus signs) will be repelled and will move slightly away. Since the negative charges in the pith ball are now nearer the object than the positive charges (C), their attraction is greater than the repulsion of the positive charges, resulting in a net attractive force.[5] This separation of charge is microscopic, but since there are so many atoms, the tiny forces add up to a large enough force to move a light pith ball.

The pith ball can be charged by touching it to a charged object, so some of the charges on the surface of the charged object move to the surface of the ball. Then the ball can be used to distinguish the polarity of charge on other objects because it will be repelled by objects charged with the same polarity or sign it has, but attracted to charges of the opposite polarity.

Often the electroscope will have a pair of suspended pith balls. This allows one to tell at a glance whether the pith balls are charged. If one of the pith balls is touched to a charged object, charging it, the second one will be attracted and touch it, communicating some of the charge to the surface of the second ball. Now both balls have the same polarity charge, so they repel each other. They hang in an inverted 'V' shape with the balls spread apart. The distance between the balls will give a rough idea of the magnitude of the charge.

Gold-leaf electroscope

Gold leaf electroscope showing electrostatic induction

The gold-leaf electroscope was developed in 1787 by British clergyman and physicist Abraham Bennet,[2] as a more sensitive instrument than pith ball or straw blade electroscopes then in use.[9] It consists of a vertical metal rod, usually brass, from the end of which hang two parallel strips of thin flexible gold leaf. A disk or ball terminal is attached to the top of the rod, where the charge to be tested is applied.[9] To protect the gold leaves from drafts of air they are enclosed in a glass bottle, usually open at the bottom and mounted over a conductive base. Often there are grounded metal plates or foil strips in the bottle flanking the gold leaves on either side. These are a safety measure; if an excessive charge is applied to the delicate gold leaves, they will touch the grounding plates and discharge before tearing. They also capture charge leaking through the air that could accumulate on the glass walls, and increase the sensitivity of the instrument. In precision instruments the inside of the bottle was occasionally evacuated, to prevent the charge on the terminal from leaking off through ionization of the air.

When the metal terminal is touched with a charged object, the gold leaves spread apart in a 'V'. This is because some of the charge on the object is conducted through the terminal and metal rod to the leaves.[9] Since they receive the same sign charge they repel each other and thus diverge. If the terminal is grounded by touching it with a finger, the charge is transferred through the human body into the earth and the gold leaves close together.

The electroscope can also be charged without touching it to a charged object, by electrostatic induction. If a charged object is brought near the electroscope terminal, the leaves also diverge, because the electric field of the object causes the charges in the electroscope rod to separate. Charges of the opposite polarity to the charged object are attracted to the terminal, while charges with the same polarity are repelled to the leaves, causing them to spread. If the electroscope terminal is grounded while the charged object is nearby, by touching it momentarily with a finger, the same polarity charges in the leaves drain away to ground, leaving the electroscope with a net charge of opposite polarity to the object. The leaves close because the charge is all concentrated at the terminal end. When the charged object is moved away, the charge at the terminal spreads into the leaves, causing them to spread apart again.

See also

Footnotes

  1. Gilbert, William; Edward Wright (1893). On the Lodestone and Magnetic Bodies. John Wiley & Sons. p. 79. a translation by P. Fleury Mottelay of William Gilbert (1600) Die Magnete, London
  2. 1 2 Derry, Thomas K.; Williams, Trevor (1993). A Short History of Technology from Earliest Times to A.D.1900. Courier Dover. ISBN 0-486-27472-1. p.609
  3. Elliott (1999)
  4. Sherwood, Bruce A.; Ruth W. Chabay (2011). Matter and Interactions, 3rd Ed. USA: John Wiley and Sons. pp. 594–596. ISBN 0-470-50347-5.
  5. 1 2 Kaplan MCAT Physics 2010-2011. USA: Kaplan Publishing. 2009. p. 329. ISBN 1-4277-9875-3.
  6. Paul E. Tippens, Electric Charge and Electric Force, Powerpoint presentation, p.27-28, 2009, S. Polytechnic State Univ. Archived April 19, 2012, at the Wayback Machine. on DocStoc.com website
  7. Henderson, Tom (2011). "Charge and Charge Interactions". Static Electricity, Lesson 1. The Physics Classroom. Retrieved 2012-01-01.
  8. Winn, Will Winn (2010). Introduction to Understandable Physics Vol. 3: Electricity, Magnetism and Ligh. USA: Author House. p. 20.4. ISBN 1-4520-1590-2.
  9. 1 2 3 [Anon.] (2001)

Bibliography

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.