Geotextile

Geotextile sandbags protected the historic house Kliffende on Sylt island against storms, which eroded the cliffs left and right from the sandbag barrier.[1]
Geotextile sandbags can be ca. 20 m long, such as those used for the artificial reef at Narrow Neck, Queensland.[1]

Geotextiles are permeable fabrics which, when used in association with soil, have the ability to separate, filter, reinforce, protect, or drain. Typically made from polypropylene or polyester, geotextile fabrics come in three basic forms: woven (resembling mail bag sacking), needle punched (resembling felt), or heat bonded (resembling ironed felt).

Geotextile composites have been introduced and products such as geogrids and meshes have been developed. Geotextiles are able to withstand many things, are durable and is able to soften a fall if someone falls down. Overall, these materials are referred to as geosynthetics and each configuration—-geonets, geosynthetic clay liners, geogrids, geotextile tubes, and others—-can yield benefits in geotechnical and environmental engineering design.

History

Geotextiles were originally intended to be an alternative to granular soil filters. The original, and still sometimes used, term for geotextiles is filter fabrics. Work originally began in the 1950s with R.J. Barrett using geotextiles behind precast concrete seawalls, under precast concrete erosion control blocks, beneath large stone riprap, and in other erosion control situations.[2] He used different styles of woven monofilament fabrics, all characterized by a relatively high percentage open area (varying from 6 to 30%). He discussed the need for both adequate permeability and soil retention, along with adequate fabric strength and proper elongation and set the tone for geotextile use in filtration situations.

Applications

A silt fence on a construction site.

Geotextiles and related products have many applications and currently support many civil engineering applications including roads, airfields, railroads, embankments, retaining structures, reservoirs, canals, dams, bank protection, coastal engineering and construction site silt fences or geotube. Usually geotextiles are placed at the tension surface to strengthen the soil. Geotextiles are also used for sand dune armoring to protect upland coastal property from storm surge, wave action and flooding. A large sand-filled container (SFC) within the dune system prevents storm erosion from proceeding beyond the SFC. Using a sloped unit rather than a single tube eliminates damaging scour.

Erosion control manuals comment on the effectiveness of sloped, stepped shapes in mitigating shoreline erosion damage from storms. Geotextile sand-filled units provide a "soft" armoring solution for upland property protection. Geotextiles are used as matting to stabilize flow in stream channels and swales.[3][4]

Geotextiles can improve soil strength at a lower cost than conventional soil nailing. In addition, geotextiles allow planting on steep slopes, further securing the slope.

Geotextiles have been used to protect the fossil hominid footprints of Laetoli in Tanzania from erosion, rain, and tree roots.[5]

In building demolition, geotextile fabrics in combination with steel wire fencing can contain explosive debris.[6]

Coir (coconut fiber) geotextiles are popular for erosion control, slope stabilization and bioengineering, due to the fabric's substantial mechanical strength.[3]:App. I.E Coir geotextiles last approximately 3 to 5 years depending on the fabric weight. The product degrades into humus, enriching the soil.[7]

Design methods

While many possible design methods or combinations of methods are available to the geotextile designer, the ultimate decision for a particular application usually takes one of three directions: design by cost and availability, design by specification, or design by function. Extensive literature on design methods for geotextiles has been published in the peer reviewed journal Geotextiles and Geomembranes.

See also

References

  1. 1 2 Müller, W. W.; Saathoff, F. (2015). "Geosynthetics in geoenvironmental engineering". Science and Technology of Advanced Materials. 16 (3): 034605. Bibcode:2015STAdM..16c4605M. PMC 5099829Freely accessible. PMID 27877792. doi:10.1088/1468-6996/16/3/034605.
  2. Barrett, R. J., "Use of Plastic Filters in Coastal Structures," Proceedings from the 16th International Conference Coastal Engineers, Tokyo, September 1966, pp. 1048–1067
  3. 1 2 Dane County Department of Land and Water Resources (2007). Dane County Erosion Control and Stormwater Management Manual (PDF) (Report). Madison, WI. Retrieved 2010-02-09.
  4. Massachusetts Department of Environmental Protection (2003). Massachusetts Erosion and Sediment Control Guidelines for Urban and Suburban Areas (PDF) (Report). Boston, MA. pp. 73–74.
  5. Renfrew, Colin and Paul Bahn, Archaeology. 4th ed. New York: Thames 2004. ISBN 978-0-500-28441-4.
  6. WGBH Boston (December 1996). "Interview with Stacey Loizeaux". NOVA Online. Public Broadcasting Service. Retrieved 2009-04-29. Other preparatory operations involve covering/wrapping the columns first with chain link fences and then with geotextile fabric, which is very puncture resistant and has a very high tensile strength. It allows the concrete to move, but it keeps the concrete from flying. The chain link catches the bigger material and the fabric catches the smaller material from flying up and out.
  7. Richards, Davi (2006-06-02). "Coir is sustainable alternative to peat moss in the garden". Garden Hints. Corvallis, OR: Oregon State University Extension Service. Retrieved 2013-03-06.

Further reading

Wikimedia Commons has media related to Geosynthetics.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.