GWR 2900 Class

The Great Western Railway 2900 or Saint Class incorporated several series of 2-cylinder passenger steam locomotives designed by George Jackson Churchward and built between 1902 and 1913 with differences in the dimensions. The majority of these were built as 4-6-0 locomotives; but thirteen examples were built as 4-4-2 (but converted to 4-6-0 during 1912/13). They proved to be a successful class which established the design principles for GWR 2-cylinder classes over the next fifty years.

Background

After finally converting the last broad gauge lines in 1892, the Great Western Railway (GWR) began a period of modernization as new cut-off lines shortened its routes to west of England, South Wales and Birmingham. During the first decade of the twentieth century the Chief Mechanical Engineer, George Jackson Churchward, designed or acquired a number of experimental locomotives with different wheel arrangements and boiler designs to help him plan for the future motive power needs of the railway.^[1] The first of these was a two-cylinder 4-6-0 locomotive, designed in 1901 whilst Churchward was still the Chief Assistant of his predecessor William Dean.

Prototypes

Between 1902 and 1905 Churchward built and tested three prototype locomotives with detail differences, before using the third as the basis for the production series.

No. 100

No. 100 as built in 1902

The first prototype was completed at the Swindon Works of the GWR (Lot 132) in February 1902.^[2] It was numbered 100 and in June 1902 was named Dean (later William Dean) to mark the latter's retirement. The new design incorporated all of Churchward's current ideas including a domeless parallel boiler, raised Belpaire firebox, 19 in (48.3 cm) diameter outside cylinders with 30 in (76.2 cm) piston stroke, and boiler pressure of 200 psi (1.38 MPa).^[3] The piston valves were driven by rocking levers actuated by the expansion link of Stephenson valve gear – this particular design was only used on no. 100.^[4] The parallel boiler was later replaced with a taper boiler, and then the first superheated taper boiler in 1910. Churchward had studied American boiler design, but he was also later influenced by continental practice in efficient motion design. From the Société Alsacienne de Constructions Mécaniques (SACM) a de Glehn 4-4-2 compound engine was ordered for comparative trials on the GWR.^[5] According to E.C. Poultney, No. 100 was the first 4-6-0 locomotive to have high enough boiler capacity and steam ports large enough to handle the steam flow required by large cylinders: "The engine probably influenced to a large extent the use made of engines of the 4-6-0 type".^[6] No.100 was renumbered 2900 in 1912, and was withdrawn from service in 1932.

No. 98

The second prototype No. 98 as built 1903

A second prototype locomotive, No. 98, was built at Swindon in March 1903 (Lot 138) to a similar design but with a taper boiler, re-designed valve gear layout and cylinders and a shorter wheelbase.^[7] Valve diameters were increased from 6 ¹⁄₂ inches (170 mm) to 10 inches (250 mm).^[5] According to Poultney, these improvements "may truly be said to be the keystone of the arch upon which all modern locomotives are designed".^[8] In 1906 this locomotive was re-boilered with a 225 psi (1.55 MPa) boiler to correspond with the third prototype. This prototype locomotive was named Vanguard in 1907 (renamed Ernest Cunard in the same year). It was renumbered 2998 in 1912, received a superheated boiler in 1911 and was withdrawn in 1933.

No. 171

A third prototype, No. 171, was built at Swindon in December 1903 (Lot 145) incorporating the improvements to No. 98 but with a 225 psi (1.55 MPa) boiler and minor amendments to the heating surface and grate area. It was built as a 4-6-0 but in October 1904 it was converted to a 4-4-2 to enable better comparison with the performance of the de Glehn compound; it was reconverted to 4-6-0 in July 1907.^[7] The conversion was carried out by substituting 4 ft 1 ¹⁄₂ in (1.257 m) trailing wheels with outside suspension for the final set of driving wheels. It was named Albion in 1904, renumbered 2971 in 1912, received a superheated boiler in 1910 and was withdrawn in 1946. No. 171 formed the basis of the main production series, introduced in 1905, although at this time Churchward was still unsure of the relative merits of the 4-4-2 and 4-6-0 wheel arrangements.

Production series

The Saint class appeared in four production series built between 1905 and 1913, each of which differed in dimensions. There were also differences between members of each series in terms of the boilers used, wheel arrangement, and arrangements for superheating. Different series and individual locomotives within series were also fitted with different tenders ranging from 3,500 imp gal (16,000 l; 4,200 US gal) to 4,000 imp gal (18,000 l; 4,800 US gal) capacity.

Scott series

First series No. 181 Ivanhoe as built as a 4-4-2

Whilst 171 was undergoing trials in 1905 nine further locomotives were ordered to be built at Swindon to a similar design (Lot 154) followed by a further ten (Lot 158). Thirteen of these were built as 4-4-2s and six as 4-6-0s. However, by January 1913, Churchward was persuaded by the superior adhesion provided by a 4-6-0 and they had all been converted to this wheel arrangement.^[9] The new locomotives were numbered 172–190 (renumbered 2972–2990 in 1912). They were named after characters in the novels of Sir Walter Scott.

Ladies

A second series of ten similar locomotives appeared in May 1906 (Swindon Lot 164), numbered 2901–10 and named after historical, mythological of poetical 'Ladies'. Nos. 2904–6 had short tapered boilers and short smokeboxes, whereas Nos. 2902–3 and 2907–10 had longer versions. All except 2901 had 18.125 in × 30 in (460 mm × 762 mm) cylinders, giving a tractive effort of 23,382 lbf (104.01 kN). No. 2901 Lady Superior was the first British locomotive to be built with a modern Schmidt superheater.^[7] The remainder of the locomotives were fitted with Swindon No.3 superheaters between 1909 and 1911 and were withdrawn between 1933 and 1952.

Saints

No. 2920 Saint David; from the third production series, built 1907, at Cardiff General Station 1953

A third series of twenty further locomotives appeared during August and September 1907 (Swindon Lot 170), numbered 2911–30 and named after Saints. The framing for these had long curved ends under the cab and over the cylinders, which greatly improved the rather angular appearance of the earlier locomotives. They were fitted with cone boilers and smokeboxes. In October 1908, No. 2922 Saint Gabriel was fitted with a Swindon No. 2 superheater. The following year the Swindon No. 3 superheater became standard for the class.^[10] Between 1909 and 1912 the remainder of the locomotives were fitted with the Swindon No. 3 superheater, which became standard for the class. The Saints were withdrawn between 1932 and 1951. No. 2925 Saint Martin was rebuilt with smaller wheels in December 1924 to become the prototype Churchward 4900 and renumbered 4900 but still carrying the same name.

Courts

2934 Butleigh Court from the fourth production series at Swindon Locomotive Depot in 1950

A fourth series of 25 locomotives appeared during the years 1911 to 1913 (Swindon Lots 185, 189 and 192). These were numbered 2931–55 and named after famous Courts (i.e. mansions). They were all built with superheaters and there were detailed differences between the boilers used on different lots.^[10] They were all withdrawn between 1948 and 1953.

Performance

2935 Caynham Court as rebuilt in 1931 with rotary-cam poppet valves, at Swindon 1946

The locomotives performed well as passenger locomotives over all the long-distance routes of the GWR and on all but the fastest express trains until they gradually became displaced to secondary services by the Castle Class in the late 1920s and 1930s. However, the 6 ft 8 ¹⁄₂ in (2.045 m) driving wheels limited their usefulness on freight trains. Churchward had recognized this limitation by the introduction of his GWR 4700 Class 2-8-0 design with 5 ft 8 in (1.727 m) driving wheels in 1919, intended for express goods trains. However, Churchward’s successor Charles Collett felt that a smaller-wheeled version of the ‘Saint’ class could form the basis of a successful mixed traffic class of locomotives. He therefore rebuilt No. 2925 Saint Martin with 6 ft (1.829 m) driving wheels to become the prototype of his successful Hall Class locomotives. Thus the 2900 class became a template for later GWR 2-cylinder 4-6-0 classes including the Modified Hall, Grange, Manor and County classes, all of which were of the same basic design.^[11]

Collett also experimented on several other members of the class. In 1923 No. 2933 was given an altered blastpipe and in 1927 No. 2947 was fitted with cylinder by-pass valves. In 1931 No. 2935 was rebuilt with rotary cam poppet valve gear.^[12]

Assessment

The class incorporated many revolutionary advances which were influential in British locomotive design for the next fifty years. According to The Great Western Society, 'Saint' class locomotives "represented one of the most important steps forward in railway traction of the 20th century", and they "are now acknowledged to have had a profound influence on almost every aspect of subsequent steam locomotive development".^[13]

Accidents and incidents

• On 9 January 1932, locomotive No. 2949 Stanford Court was hauling a milk train that overran signals at Didcot East Junction and collided with a freight train. The locomotive was derailed and six wagons were slightly damaged.^[14]

Preservation

Because no Saints survived into preservation, the Great Western Society at Didcot is currently reverting 4942 Maindy Hall to be 2999 - Lady of Legend when running as a 4-6-0 and 191 Churchward when it runs as 4-4-2.^[13]

List of locomotives

References

External links

Wikimedia Commons has media related to GWR 2900 Class.

• Great Western Society "Great Western Archive", details of locomotives: 2900 - 2924,  2925 - 2955,   2971 - 2998