GWR 2301 Class

GWR 2301 Class

2516 preserved as a static exhibit in the Swindon steam museum
Type and origin
Power type Steam
Designer William Dean
Builder GWR Swindon Works
Build date 1883 to 1899
Total produced 260
Specifications
Configuration:
 ​
 • Whyte 0-6-0
Gauge 4 ft 8 1⁄2 in (1,435 mm) standard gauge
Driver dia. 5 ft 2 in (1.575 m)
Loco weight 36.8 long tons (37.4 t; 41.2 short tons)
Tender weight 34.25 long tons (34.80 t; 38.36 short tons)
Fuel type Coal
Boiler pressure 180 psi (1,241.06 kPa)
Cylinders Two, inside
Cylinder size 17 in × 24 in (432 mm × 610 mm), 17 1⁄2 in × 24 in (444 mm × 610 mm) from 1908
Performance figures
Tractive effort 17,120 lbf (76.15 kN) or 18,140 lbf (80.69 kN)
Career
Class 2301
Power class Ungrouped (17 in or 432 mm cyls, 150 psi or 1,000 kPa)
A (17 1⁄2 in or 444 mm cyls, 180 psi or 1,200 kPa)
Axle load class Uncoloured
Disposition One preserved, remainder scrapped

The Great Western Railway (GWR) 2301 Class or Dean Goods Class is a class of British 0-6-0 steam locomotives.

Swindon railway works built 260 of these goods locomotives between 1883 and 1899 to a design of William Dean. The 2301 class broke with previous GWR tradition in having inside frames only and changes were made in the boiler design during the period that they were being built. The first twenty engines were originally domeless though all were provided with domed boilers in due course. They were numbered 2301–2360 and 2381–2580 (2361–2380 were of the 2361 class, which were similar visually but had outside frames).

War Service

In 1917, 62 engines were taken over by the Railway Operating Division and sent to France. 46 of these engines returned to England in the early summer of 1919, but the other 16 had been sent on to Salonika at the beginning of 1918. Two of these engines, nos 2308 and 2542, were sold to the Ottoman railways and renumbered 110 and 111. No 111 was withdrawn in September 1929, but 110 lasted until the 1950s. Of the 14 engines remaining at Salonika, six were written-off and the other eight returned to England in April 1921.

At the outbreak of the Second World War, the War Department requisitioned 100 of these engines from the GWR and the GWR had to hastily reinstate some engines that had been recently withdrawn. The requisitioned engines were fitted with Westinghouse brakes and 10 were fitted with pannier tanks and condensing gear. All were painted black with their WD numbers painted on. In December 1940, the War Department requisitioned a further 8 engines.

At the time of the German invasion of France, 79 of these engines had been shipped to France. Some of the engines were destroyed in the retreat to Dunkirk whilst the remainder were used on the French railways by the German occupation forces. After the war, between 22 and 26 engines were sent to China under UNRRA auspices, and 30 were returned to the UK, but were deemed unfit for service and scrapped. No.2435 (WD no.188) was used in Silesia and then Austria until 1948 when it was claimed by the Russians before being handed back to the Austrians in 1952. Two further engines, nos. 2419 and 2526 (WD nos. 106 and 132). The remaining engines are assumed to have been scrapped.

Of the engines that remained in England, most of them worked at War Department and Ordnance depots around the country, though in 1943, 6 were shipped to Tunisia and thence to Italy.

Some locomotives of the class have the unusual distinction of being shipped overseas in both World Wars. 32 of the 108 locomotives requisitioned during the Second World War had been previously requisitioned during the First World War, and of those 32, 24 were again sent overseas.[1]

British Railways

No. 2483 at Llanidloes station 1949

Fifty-four locomotives passed to British Railways in 1948, mostly being used on Welsh branch lines due to their light axle loads. They were progressively replaced by new BR standard class 2 2-6-0 engines, and no 2538 was the last to be withdrawn in May 1957.

Preservation

The backhead of preserved 2516

one locomotive, no. 2516(built 1897), survived into preservation. 2516 is currently a static exhibit at Swindon Steam Railway Museum, with the tender displayed far behind; visitors consequently have a clear view into the driving cab (see pictures).

Models

Oxford Rail have released models of the Dean goods class in 2017 in both Great Western and British Railways liveries. [2]

References

  1. ↑ Pigott 2014, pp. 58-59.
  2. ↑ http://www.hornbymagazine.com/2016/01/29/dean-goods-mk-3s-and-new-wagons-from-oxford/

Sources

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.