Frasca International

Frasca International, Inc.
Private
Industry Flight Simulation
Founded Champaign, IL (1958)
Headquarters

Champaign, IL (1958-1990)

Urbana, IL (1990-Present)
Key people
 John Frasca - CEO and president
Rudy Frasca - Founder and former President[1]
Products Flight Training Devices, Full Flight Simulators, Aviation Training Devices
Number of employees
 Approximately 185[2]
Website http://www.frasca.com/

Frasca International, Inc., is a United States manufacturer of flight simulation training devices, with over 2600 training devices delivered in approximately 70 countries throughout the world.[3] Now based in Urbana, Illinois, Frasca International was founded in Champaign, Illinois in 1958 by Rudy Frasca. Frasca flight simulators are used in all segments of the aviation industry, including their extensive use in many prominent college aviation programs, including Purdue University, Indiana State University, Embry-Riddle Aeronautical University, University of North Dakota, Louisiana Tech University, University of Illinois, and Western Michigan University.

History

In 1949, Rudy Frasca joined the United States Navy, where he first experienced flight simulation as a Link Trainer instructor. Following his service, and a period of research at the University of Illinois Institute of Aviation, Frasca founded Frasca Aviation (later renamed to Frasca International) in 1958.[4] All early Frasca training devices used mechanical computers exclusively. After working out of various locations for several years (including his home garage), Frasca established a permanent manufacturing plant in downtown Champaign, IL.

In the late 1970s, Frasca devices were converted to use analog electronic computers, allowing for devices that were more simple and cost-effective to manufacture, operate, and maintain. The electronic transition began a period of rapid technological development, culminating in the transition to a digital, PC-based simulation architecture in 1983.[3]

In 1990, in order to support steadily increasing demand, Frasca International again relocated to a 70,000-square-foot (6,500 m2) office building and manufacturing facility in Urbana, Illinois, adjacent to Frasca Field.[4] The new facility provided a substantial increase in manufacturing capacity, and allowed for the production of the company's first Full Flight Simulator (FFS) a short time after moving to the new location.

Throughout the 1990s and early 2000s (decade), Frasca continued to expand its product line, providing training devices for all types of aircraft, both fixed-wing and rotary-wing, and in 2003, Frasca manufactured a Level B Cessna 208B Grand Caravan FFS, followed by a Level C Beechcraft B200 King Air FFS in 2005.[3]

In the mid-2000s (decade), helicopters began to play an increasingly prominent role in the Frasca line-up, with the first Level 6 helicopter Flight Training Device (FTD) delivered in 2007.[3] Subsequently, two more helicopter FTDs (a Eurocopter EC135 and a Eurocopter AS350) were qualified Level 6 in 2008, followed by another EC135 qualified as a JAA Level 3 FTD by the FCAA.[5] The Level 6 EC135, along with a Frasca Bell 206 FTD, were the first Level 6 helicopter FTDs qualified under 14 CFR Part 60.

Most recently, Frasca has partnered with FlightSafety International to produce and qualify the first Level 7 FTD in August 2009.[6] Frasca provided the hardware, flight and systems models, and instructor station, which were integrated to the FlightSafety Vital X image generator and 8 channel visual. Similar Level 7 Bell 206 and Bell 407 devices have been delivered. Frasca delivered a level D CJ1+ Full Flight Simulator to China in 2014.

Product line

Frasca currently manufactures a complete line of training devices including CPTs (Cockpit Procedure Trainers), AATDs (Advanced Aviation Training Devices), FNPTs (Flight and Navigation Procedures Trainers), FTDs (Flight Training Devices), and FFS (Full Flight Simulators). Simulated aircraft range from small single-engine training airplanes, such as the Cessna 172 to large transport category airplanes, such as the Boeing 737.

The helicopter line covers models from the small Robinson helicopters to medical transports, such as the Bell 407 and Eurocopter EC135, to large passenger transport helicopters, such as the Sikorsky S-92 and Eurocopter EC225.[5]

CRJ-200 AATD, first delivered to Central Washington University.

Customers

Frasca training devices are used worldwide by operators in a variety of sectors, including general aviation, business aviation, airline transport, medical, and military.

Notable commercial customers include Bell Helicopter, Bristow Helicopters, Era Training Center, and Delta Connection.[7]

Notable colleges and universities that use Frasca products include Embry-Riddle Aeronautical University, Southern Illinois University (SIU), Indiana State University, Central Washington University, Western Michigan University, University of North Dakota, Louisiana Tech University, University of Illinois, and many others. Embry-Riddle Aeronautical University uses a variety of Frasca simulators for its training, including Cessna 172s, and Diamond DA 42 models. Embry-Riddle's first two Level 6 DA-42 Flight Training Devices were qualified Level 6 in March 2008.[8]

Awards and recognitions

Several awards and recognitions have been received by both Rudy Frasca and Frasca International.

References

  1. ↑ "Frasca Appoints New CEO". Retrieved 5 September 2011.
  2. ↑ "Frasca Careers"
  3. 1 2 3 4 "CAT Magazine, Issue 2/2008"
  4. 1 2 "Frasca International, Inc. Corporate History"
  5. 1 2 "Frasca 2008 News"
  6. ↑ "Vertical Magazine Flight Test"
  7. ↑ "Frasca Customer Profiles"
  8. ↑ FAA Approves Frasca DA-42 Sims at Embry-Riddle
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.