Ford FT-B

Ford FT-B

model
Type Armoured car
Place of origin  Poland
Service history
In service 1920-1931
Used by  Poland
Wars Polish-Bolshevik War
Production history
Designer Tadeusz Tański
Designed 1920
Manufacturer Gerlach i Pulst
Produced 1920
No. built 17
Specifications
Weight 1350 kg
Length 3.25 m (10 ft 8 in)
Width 1.55 m (5 ft 1 in)
Height 1.73 m (5 ft 8 in)
Crew 2

Armor 8 mm
Main
armament
1 x 7.92 mm Maxim 08/15
1,250 rounds
Secondary
armament
25 x hand grenades
Engine 4-cylinder 2.9 L water-cooled gasoline engine
22.5 hp
Power/weight 16.6 hp/t
Suspension transversely mounted semi-elliptical spring for each of the axles
Operational
range
250 km
Speed 50 km/h (31 mph)

The Ford FT B (also known as Ford Tf-c and model 1920) was the first armoured car designed and built in Poland. Built on the chassis of the famous Ford T and armoured with re-used armoured plates, the car was a successful design for its time. The main designer was the engineer Tadeusz Tański. The armoured vehicle originated on account of the high demand during the Polish-Soviet war in 1920.

After the outbreak of the Polish-Soviet War in 1919, the Polish Army was severely under-equipped. Except for a number of FT-17 tanks that arrived with the Blue Army formed in France, the Polish forces lacked any armoured reconnaissance vehicles. During the Soviet offensive leading to the battle of Warsaw the situation became even more tragic as many Austin-Putilov Armoured Cars captured from the Red Army were retaken by the Bolsheviks. It was then that engineer Tadeusz Tański, a renowned inventor and a worker of the Ministry of Military Affairs, designed his armoured car. The project originated within only 2 weeks from Tanski’s initiative. The prototype was prepared in less than two weeks in the Gerlach i Pulsing works in Warsaw. After a series of tests the production started, and each of the battle-ready cars was immediately dispatched to the front-line and attached to various units. Altogether a series of 16 or 17 cars were made.

The project was based on the successful Ford Model T, one of the most popular cars of the epoch. The chassis and the levers were significantly reinforced and the fuel tank was moved. In addition, the crank was extended to allow for starting the engine from the inside and the dashboard had been modified. The armoured plating was handmade out of scrapped German armoured trench shields, and attached to the chassis by bolts.

Modern replica

The FT-B cars took part in the later stage of the Polish-Soviet war and fought in the battles along the Wkra river and in the battle of Warsaw, as well as the battle of Kowel and in numerous other battles.

The high speed, agility, and uncomplicated servicing and repair (thanks to the commercial Ford T chassis) were among the advantages of the vehicle. The armoured vehicles managed In spite of the extra weight of the armour, the vehicles managed well in heavy terrain, and were also able to cross relatively weak bridges on account of their low mass in comparison to other armoured vehicles. The Ford Tf C was really small in comparison to other armoured vehicles of the era, being for example half the size of the Austin-Putilov, and offered a smaller target. Nevertheless, the consequence was that Ford Tf C were very cramped inside, and the driver had to steer from a squatting position. Another problem was engine overheating during longer cross-countrydrives, or with let down cooler armour plating. Also the springs were overloaded in spite of strengthening, but the vehicle was urgently required and the advantages offset the defects. In 1921 Tanski offered to build another series of 30 vehicles; however, this was rejected, because the war was over and no other armoured vehicles were required. 12 Fords Tf C armored vehicles outlasted the war and were in use until 1931. Some had proper names such as "Osa" (wasp), "Mucha" (fly), and "Komar" (mosquito) painted on their armor.

References

    Bibliography
    This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.