Chess clock

A chess clock consists of two adjacent clocks with buttons to stop one clock while starting the other, so that the two clocks never run simultaneously. Chess clocks are used in chess and other two-player games where the players move in turn. The purpose is to keep track of the total time each player takes for their own moves, and ensure that neither player overly delays the game.

Chess clocks were first used extensively in tournament chess, and are often called game clocks. The first time that game clocks were used in a chess tournament was in the London 1883 tournament.^[1] Their use has since spread to tournament Scrabble, shogi, go, and nearly every competitive two-player board game, as well as other types of games. In a tournament, the arbiter typically places all clocks in the same orientation, so that they can easily assess games that need attention at later stages.

The simplest time control is "sudden death", in which players must make a predetermined number of moves in a certain amount of time or forfeit the game immediately. A particularly popular variant in informal play is blitz chess, in which each player is given a short time (e.g. five minutes) on the clock in which to play the entire game.

The players may take more or less time over any individual move. The opening moves in chess are often played quickly due to their familiarity, which leaves the players more time to consider more complex and unfamiliar positions later. It is not unusual in slow chess games for a player to leave the table, but the clock of the absent player continues to run if it is their turn, or starts to run if their opponent makes a move.

Analog game clocks

A typical analog chess clock

Analog clocks are equipped with a "flag" that falls to indicate the exact moment the player's time has expired. Analog clocks use mechanical buttons. Pressing the button on one player's side physically stops the movement of that player's clock and releases the hold on the opponent's.

The drawbacks of the mechanical clocks include accuracy and matching of the two clocks, and matching of the indicators (flags) of time expiration. Additional time cannot easily be added for more complex time controls, especially those that call for an increment or delay on every move, such as some forms of byoyomi. However, a malfunctioning analog clock is a less serious event than a malfunctioning digital clock.^[2]

Early development of digital game clocks

Modern day chess clocks.

In 1973, to address the issues with analog clocks, Bruce Cheney, a Cornell University Electrical Engineering student and chess player, created the first digital chess clock as a project for an undergraduate EE course.^[3] Typical of most inventions, it was crude compared to the products on the market many years later and was limited by the technology that existed at the time. For example, the display was done with red LEDs. LEDs require significant power, and as a result, the clock had to be plugged into a wall outlet. The high cost of LEDs at the time meant that only one set of digits could be displayed, that of the player whose turn it was to move. This meant that each player's time had to be multiplexed to the display when their time was running. In 1973, LSI chips were not readily or cheaply available, so all the multiplexing and logic were done using chips that consisted of four two-input TTL NAND gates, which resulted in excessive power consumption. Being plugged into the wall is obviously a major drawback, but had one advantage: the timebase for the clock was driven off of a rectified version of 60 cycle AC current. Each player had a separate counter, and, in a parallel to the original mechanical architecture, one player's counter was disabled while the other's was running. The clock only had one mode: time ran forward. It could be reset, but not set. It did not count the number of moves. But it successfully addressed the original goals of the project (accurate and matched timing).

The first commercially available digital chess clock was patented in 1975 by Joseph Meshi and Jeffrey R. Ponsor and sold as the Micromate-80.^[4] Three years later a much-improved Micromate-180 was produced alongside Meshi's MBA Thesis, "Demand Analysis for a New Product (The Digital Chess Clock)", at San Diego State University, while Meshi and Ponsor continued to develop digital gaming.^[5]

Recent developments of digital clocks and current usage

Digital chess clock connected to a board that automatically senses when moves have been made

Digital clocks and Internet gaming have spurred a wave of experimentation with more varied and complex time controls than the traditional standards. Time control is commonly used in modern chess in many different methodologies. One particularly notable development, which has gained quite wide acceptance in chess, was proposed by former world champion Bobby Fischer, who in 1988 filed for U.S. Patent 4,884,255 (awarded in 1989) for a new type of digital chess clock. Fischer's digital clock gave each player a fixed period of time at the start of the game and then added a small amount after each move. Joseph Meshi called this "Accumulation" as it was a main feature of his patented Micromate-180 (US Patent 4,247,925 1978). This became the linchpin of Fischer's clock patented 10 years later. In this way, the players would never be desperately short of time, but games could also be completed more quickly, doing away with the need for adjournments (in which a game is left incomplete to be finished at a later date). Although it was slow to catch on, as of 2004 a very large number of top class tournaments use Fischer's system, though usually in combination with the more traditional clocks (at lower levels, more traditional clocks are still employed, as they are cheaper). Other aspects of Fischer's patent, such as a synthesized voice announcing how much time the players have, thus eliminating the need for them to keep looking at the clock, have not been adopted.

On March 10, 1994, a patent application was filed by inventors Frank A. Camaratta Jr. of Huntsville, Alabama, and William Goichberg of Salisbury Mills, New York, for a game timer especially suitable for playing the game of chess, which employed a "delay" feature. The game timer provides, among other features, a user-definable delay between the time the activation button is pressed and the time that the activated clock actually begins to count down. United States Patent 5,420,830 was issued on May 10, 1995, and subsequently assigned to the United States Chess Federation by the inventors. The benefit of the delay clock is to reduce the likelihood that a player with positional and/or material superiority will lose a match solely because of the expiration of time on that player's time clock. The "delay" mode is still a popular feature for both standard and sudden-death time controls in major tournaments throughout the U.S.

Time controls

There are five main types of Time controls: (1) Fischer (invented by Bobby Fischer), (2) Bronstein (invented by David Bronstein), (3) Simple delay, (4) Overtime penalty and (5) Hourglass. The first three time controls implement some sort of delay clock, a small amount of time that is added for each move. The reason is that with a sudden-death time limit, all moves must be completed in the specified time, or the player loses. With a small delay added at each move, the player always has at least that much time to make a move. The three types of delay clocks differ in how the delay is implemented. The last two time controls are somewhat different, as they do not rely on time delay, as explained below.

• Fischer (also known as increment)—before a player has made their move, a specified time increment is added to their clock. Time can be accumulated, so if the player moves within the delay period, their remaining time actually increases. For example, if the delay time is five seconds, and a player has four seconds left on their clock, as soon as their opponent moves, they receive the increment and have nine seconds to make a move. If they take two seconds to move, on the start of their next move they have twelve seconds. There is also a variant of this time control that adds the delay after a player makes their move (Fischer after), so the delay is added to the player's remaining time and is available for their next move. If however time runs out during their move, the game ends without the delay time being added. This variant prevents a player who is in time-trouble from taking advantage of the extra time.
• Bronstein delay—with the Bronstein timing method, the increment is always added after the move. But unlike Fischer, not always the maximum increment is added. If a player expends more than the specified increment, then the entire increment is added to the player's clock. But if a player has moved faster than the time increment, only the exact amount of time expended by the player is added. For example, if the delay is five seconds, the player has ten seconds left in their clock before their turn and during their turn they spend three seconds, after they press the clock button to indicate the end of their turn, their clock increases by only three seconds (not five). This ensures that the time left on the clock can never increase, even if a player makes fast moves.
• Simple delay—when it becomes a player's turn to move, the clock waits for the delay period before starting to subtract from the player's remaining time. For example, if the delay is five seconds, the clock waits for five seconds before counting down. The time is not accumulated. If the player moves within the delay period, no time is subtracted from their remaining time. This time control is similar to a Bronstein with time added before the move.
• Overtime penalty—it is a sudden death time control, without any increment nor delay. The difference here is that when the time expires by dropping to zero, a flag is set, and the clock immediately starts counting up without limit. This time control applies to games where the amount of time used after the allowed time can be subtracted from the player's score as a penalty, such as Tournament or Club Scrabble.
• Hourglass—a player loses in this time control when they allow the difference between both clocks to reach the specified total amount. For example, if the total is defined as one minute, both players start their clocks at thirty seconds. Every second the first player uses to think in their moves is subtracted from their clock and added to their opponent's clock. If they use thirty seconds to move, the difference between the clocks reaches one minute, and the time flag falls to indicate that they lose by time. If they have used twenty nine seconds and then push the clock's button, they have one second left on their clock and their opponent has fifty-nine seconds.

References

Further reading

• Keith Ammann (April 2012). "Winding Down: This year's rule changes may begin the last chapter in the history of the analog clock". Chess Life. 

External links

Wikimedia Commons has media related to Chess clocks.

Look up chess clock in Wiktionary, the free dictionary.

• U.S. Patent 4,884,255 for Fischer's clock
• Online Chess Clock / Chess Timer Example, used for Fast Chess