EMD F59PH

Blue and gray train with fall foliage
NCDOT F59PH No. 1893 and F59PHI No. 1755 leading a Piedmont.

The EMD F59PH is a four-axle 3,000 hp (2 MW) B-B diesel-electric locomotive built by General Motors Electro-Motive Division in two variants from 1988 to 2001. The original F59PH was designed in consultation with GO Transit for commuter operation in Toronto. The design was successful and became the backbone of GO Transit's fleet for two decades. Another major operator is Southern California's Metrolink, which launched with F59PHs in 1992. Production of the F59PH ended in 1994, with 73 locomotives built.

The F59PHI was designed for Amtrak California intercity service and began production in 1994. It is distinguished from the F59PH by its streamlined cab. A total of 83 F59PHIs were built between 1994–2001, primarily for commuter operators.

F59PH

EMD F59PH

Two F59PH locomotives owned by GO Transit at Oakville station. GO has since discontinued the majority of these locomotives but a handful remain in regular service. Several ex-GO units are now operated by other services.
Type and origin
Power type Diesel-electric
Builder Electro-Motive Division (EMD),
General Motors Diesel (GMD)
Build date May 1988 to May 1994
Total produced 73
Specifications
Gauge 4 ft 8 12 in (1,435 mm)
Length 58 ft 2 in (17.73 m)
Prime mover EMD 12-710G3A
Engine type V12 Diesel
Cylinders 12
Performance figures
Power output 3,000 hp (2.24 MW)
Career
Locale Canada, United States

The F59PH was the first in the "F59" series of locomotives. 73 locomotives were built from May 1988 to May 1994 for two commuter transit railroads, Metrolink of Los Angeles, California, United States and GO Transit of Toronto, Ontario, Canada.[1] While Metrolink continues to use these locomotives today, in 2008, GO Transit began discontinuing operations using this locomotive in favour of the new MPI MP40PH-3C.[2] Only eight locomotives that were refurbished in 2011 remain in service. Those eight locomotives will be replaced upon the delivery of the MPI MP54AC locomotives.

This locomotive is equipped with a turbocharged EMD 12-710G3A, a 12-cylinder, two-stroke Diesel engine (prime mover), front and rear platforms, a full-width cab with a three-piece windshield. Earlier EMD cowl-type locomotives had used a two-piece windshield, while the Canadian comfort cab used a four-piece design.[2]

The F59PH is still used today, mainly on commuter railroads. Metrolink has rebuilt 5 of their F59's with an upgraded cooling system, an upgraded 12-710G3Eco Tier 2 engine, and an E-bell, making them F59PHR.

Fleet details

Operator Number Year built Unit numbers Comments
Agence métropolitaine de transport 10 1988-1990 1340-1349
  • Purchased secondhand from GO Transit
  • Used on the Candiac Line, to be used on Vaudreuil-Hudson and Mont-Saint-Hilaire Lines.
  • Some of them are undergoing refurbishments and repainting.
GO Transit 8 1988–1994 557–564
  • GO Transit owned 49 locomotives (520–568), but most have been retired and replaced by new MPI MP40 locomotives.
  • Units refurbished in 2011 remain in service.
  • Remainder to be replaced by MP54AC.
Metra 3 1988 97-99
  • Three ex-AMT locomotives are painted in 2003 style similar to MP36PH's.
  • Operate on the Metra Milwaukee Districts
Metrolink 23 1992–1993 851–873
  • 855 destroyed in the 2008 Chatsworth train collision and scrapped.
  • 3 units leased from GO Transit.
NCDOT 5 1988-1990 1810, 1859, 1869, 1871, 1893, 1984
  • Used on Amtrak Piedmont service.
  • Purchased secondhand from GO Transit and rebuilt by American Motive Power.
Trinity Railway Express 8 1988–1994 525, 527, 528, 565–568
  • Purchased secondhand from GO Transit.
RB Railway Group 12 1988-1990 18520–18524, 18531, 18537–18538, 18547, 18551, 18554
  • Purchased secondhand from GO Transit.
  • Company leases units to commuter operators. Currently units 18520, 18522 & 18533 are leased to Metrolink, to replace engines out of service for installation of positive train control equipment. Some units are scheduled to be used on the proposed SEMCOG Commuter Rail.

F59PHI

EMD F59PHI

Amtrak/NCDOT RNCX EMD F59PHI #1797, "City of Asheville", leading the Piedmont north out of Charlotte, North Carolina on February 20, 2003
Type and origin
Power type Diesel-electric
Builder GM Electro-Motive Division (EMD)
General Motors Diesel (GMD)
Build date September 1994 to 2001
Total produced 83[1]
Specifications
Configuration:
  AAR B-B
Gauge 4 ft 8 12 in (1,435 mm) standard gauge
Length 58 ft 7 in (17.86 m)
Prime mover EMD 12-710G3C-EC
Engine type V12 diesel
Cylinders 12
Performance figures
Maximum speed 110 mph (177 km/h)
Power output 3,000 hp (2.2 MW)
Tractive effort Starting: 290 kN (65,195 lbf),
Continuous: 170 kN (38,218 lbf) @ 16 mph (25.7 km/h)
Career
Locale North America

The EMD F59PHI is a common diesel-electric locomotive on passenger trains in North America, built originally by General Motors Electro-Motive Division (EMD), now built by the successor company, Electro-Motive Diesel, which is owned by Progress Rail Services, itself a division of Caterpillar.

First built in 1994, the locomotive is a 3,200 hp (2.4 MW) B-B diesel-electric locomotive intended for service on North American mainlines.[3] This locomotive is equipped with a turbocharged EMD 12-710G3C-EC, a 12-cylinder, 2 stroke diesel engine (prime mover). The main (traction) alternator converts mechanical energy from the prime mover into electrical energy that is distributed through a high voltage cabinet to direct current traction motors. Each of the four traction motors is directly geared to a pair of driving wheels. The gear ratio of the traction motors (model D87BTR) to wheel axle determines the maximum operating speed of the locomotive; a standard F59PHI has a gear ratio of 56:21 which provides a top speed of 110 mph (180 km/h).

The F59PHI has a fully enclosed carbody which provides protected walkways for easy access to the engine room and trailing units. This arrangement allows routine maintenance while the locomotive is in service. The noteworthy aspect of this locomotive's exterior is the use of composites to present a streamlined appearance.[3]

To supply electrical power for passenger service, the F59PHI is equipped with a secondary electrical generator referred to as the Head End Power (HEP) unit. The head-end generator generates AC power at 480 V, 60 Hz AC, and can be rated between 500 and 750 kW (670 and 1,010 hp) to provide power to the passenger carriages for lighting, electric heating, and air conditioning. The head-end generator is powered by a second diesel engine dedicated to it. With this arrangement, the prime mover is not burdened by head-end power generation and consequently is used solely for supplying tractive effort.

When it debuted for Caltrans in late 1994, the F59PHI was the first locomotive in the United States which met California's stringent emission standards.[3]

Examples of the F59PHI are currently operated by these companies:

Accidents and incidents

On February 24, 2015, Metrolink locomotive #870 was pushing (the locomotive was located at the rear) a passenger train that struck a vehicle obstructing the line at Oxnard, California and was derailed. One person was killed and 29 were injured.

On July 2, 2017, Amtrak locomotive #467 was involved in a derailment near Steilacoom, Washington. Minor injuries were reported, but no fatalities.

See also

Notes

  1. 1 2 McDonnell 2015, p. 208
  2. 1 2 Solomon 2011, p. 159
  3. 1 2 3 "F59PHI debuts in California". Railway Age   via HighBeam Research (subscription required) . December 1, 1994. Retrieved 2012-12-27.

References

Further reading

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.