Scientific notation

Scientific notation (also referred to as scientific form, standard form or standard index form) is a way of expressing numbers that are too big or too small to be conveniently written in decimal form. It is commonly used by scientists, mathematicians and engineers, in part because it can simplify certain arithmetic operations. On scientific calculators it is known as "SCI" display mode.

Decimal notation Scientific notation
2 2×100
300 3×102
4,321.768 4.321768×103
−53,000 −5.3×104
6,720,000,000 6.72×109
0.2 2×10−1
0.000 000 007 51 7.51×10−9

In scientific notation all numbers are written in the form

m × 10n

(m times ten raised to the power of n), where the exponent n is an integer, and the coefficient m is any real number, called the significand or mantissa.[1] However, the term "mantissa" may cause confusion because it is the name of the fractional part of the common logarithm. If the number is negative then a minus sign precedes m (as in ordinary decimal notation). In normalized notation, the exponent is chosen so that the absolute value of the coefficient is at least one but less than ten.

Decimal floating point is a computer arithmetic system closely related to scientific notation.

Normalized notation

Any given integer can be written in the form m×10^n in many ways: for example, 350 can be written as 3.5×102 or 35×101 or 350×100.

In normalized scientific notation (called "standard form" in the UK), the exponent n is chosen so that the absolute value of m remains at least one but less than ten (1  |m| < 10). Thus 350 is written as 3.5×102. This form allows easy comparison of numbers, as the exponent n gives the number's order of magnitude. In normalized notation, the exponent n is negative for a number with absolute value between 0 and 1 (e.g. 0.5 is written as 5×10−1). The 10 and exponent are often omitted when the exponent is 0.

Normalized scientific form is the typical form of expression of large numbers in many fields, unless an unnormalized form, such as engineering notation, is desired. Normalized scientific notation is often called exponential notation—although the latter term is more general and also applies when m is not restricted to the range 1 to 10 (as in engineering notation for instance) and to bases other than 10 (as in 3.15×2^20).

Engineering notation

Engineering notation (often named "ENG" display mode on scientific calculators) differs from normalized scientific notation in that the exponent n is restricted to multiples of 3. Consequently, the absolute value of m is in the range 1 ≤ |m| < 1000, rather than 1 ≤ |m| < 10. Though similar in concept, engineering notation is rarely called scientific notation. Engineering notation allows the numbers to explicitly match their corresponding SI prefixes, which facilitates reading and oral communication. For example, 12.5×10−9 m can be read as "twelve-point-five nanometers" and written as 12.5 nm, while its scientific notation equivalent 1.25×10−8 m would likely be read out as "one-point-two-five times ten-to-the-negative-eight meters".

Significant figures

A significant figure is a digit in a number that adds to its precision. This includes all nonzero numbers, zeroes between significant digits, and zeroes indicated to be significant. Leading and trailing zeroes are not significant because they exist only to show the scale of the number. Therefore, 1,230,400 usually has five significant figures: 1, 2, 3, 0, and 4; the final two zeroes serve only as placeholders and add no precision to the original number.

When a number is converted into normalized scientific notation, it is scaled down to a number between 1 and 10. All of the significant digits remain, but the place holding zeroes are no longer required. Thus 1,230,400 would become 1.2304 × 106. However, there is also the possibility that the number may be known to six or more significant figures, in which case the number would be shown as (for instance) 1.23040 × 106. Thus, an additional advantage of scientific notation is that the number of significant figures is clearer.

Estimated final digit(s)

It is customary in scientific measurements to record all the definitely known digits from the measurements, and to estimate at least one additional digit if there is any information at all available to enable the observer to make an estimate. The resulting number contains more information than it would without that extra digit(s), and it (or they) may be considered a significant digit because it conveys some information leading to greater precision in measurements and in aggregations of measurements (adding them or multiplying them together).

Additional information about precision can be conveyed through additional notations. It is often useful to know how exact the final digit(s) are. For instance, the accepted value of the unit of elementary charge can properly be expressed as 1.6021766208(98)×10−19 C,[2] which is shorthand for (1.6021766208±0.0000000098)×10−19 C.

E-notation

A calculator display showing the Avogadro constant in E-notation

Most calculators and many computer programs present very large and very small results in scientific notation, typically invoked by a key labelled EXP (for exponent), EEX (for enter exponent), EE, EX, E, or ×10x depending on vendor and model. Because superscripted exponents like 107 cannot always be conveniently displayed, the letter E (or e) is often used to represent "times ten raised to the power of" (which would be written as "× 10n") and is followed by the value of the exponent; in other words, for any two real numbers m and n, the usage of "mEn" would indicate a value of m × 10n. In this usage the character e is not related to the mathematical constant e or the exponential function ex (a confusion that is unlikely if scientific notation is represented by a capital E). Although the E stands for exponent, the notation is usually referred to as (scientific) E-notation rather than (scientific) exponential notation. The use of E-notation facilitates data entry and readability in textual communication since it minimizes keystrokes, avoids reduced font sizes and provides a simpler and more concise display, but it is not encouraged in publications.[3]

Examples and other notations

Order of magnitude

Scientific notation also enables simpler order-of-magnitude comparisons. A proton's mass is 0.0000000000000000000000000016726 kg. If written as 1.6726×10−27 kg, it is easier to compare this mass with that of an electron, given below. The order of magnitude of the ratio of the masses can be obtained by comparing the exponents instead of the more error-prone task of counting the leading zeros. In this case, −27 is larger than −31 and therefore the proton is roughly four orders of magnitude (10,000 times) more massive than the electron.

Scientific notation also avoids misunderstandings due to regional differences in certain quantifiers, such as billion, which might indicate either 109 or 1012.

In physics and astrophysics, the number of orders of magnitude between two numbers is sometimes referred to as "dex", a contraction of "decimal exponent". For instance, if two numbers are within 1 dex of each other, then the ratio of the larger to the smaller number is less than 10. Fractional values can be used, so if within 0.5 dex, the ratio is less than 100.5, and so on.

Use of spaces

In normalized scientific notation, in E-notation, and in engineering notation, the space (which in typesetting may be represented by a normal width space or a thin space) that is allowed only before and after "×" or in front of "E" is sometimes omitted, though it is less common to do so before the alphabetical character.[20]

Further examples of scientific notation

Converting numbers

Converting a number in these cases means to either convert the number into scientific notation form, convert it back into decimal form or to change the exponent part of the equation. None of these alter the actual number, only how it's expressed.

Decimal to scientific

First, move the decimal separator point sufficient places, n, to put the number's value within a desired range, between 1 and 10 for normalized notation. If the decimal was moved to the left, append "× 10n"; to the right, "× 10−n". To represent the number 1,230,400 in normalized scientific notation, the decimal separator would be moved 6 digits to the left and "× 106" appended, resulting in 1.2304×106. The number −0.0040321 would have its decimal separator shifted 3 digits to the right instead of the left and yield −4.0321×10−3 as a result.

Scientific to decimal

Converting a number from scientific notation to decimal notation, first remove the × 10n on the end, then shift the decimal separator n digits to the right (positive n) or left (negative n). The number 1.2304×106 would have its decimal separator shifted 6 digits to the right and become 1,230,400, while −4.0321×10−3 would have its decimal separator moved 3 digits to the left and be −0.0040321.

Exponential

Conversion between different scientific notation representations of the same number with different exponential values is achieved by performing opposite operations of multiplication or division by a power of ten on the significand and an subtraction or addition of one on the exponent part. The decimal separator in the significand is shifted x places to the left (or right) and x is added to (or subtracted from) the exponent, as shown below.

1.234×103 = 12.34×102 = 123.4×101 = 1234

Basic operations

Given two numbers in scientific notation,

and

Multiplication and division are performed using the rules for operation with exponentiation:

and

Some examples are:

and

Addition and subtraction require the numbers to be represented using the same exponential part, so that the significand can be simply added or subtracted:

and with

Next, add or subtract the significands:

An example:

Other bases

While base ten is normally used for scientific notation, powers of other bases can be used too,[24] base 2 being the next most commonly used one.

For example, in base-2 scientific notation, the number 1001b in binary (=9d) is written as 1.001b × 2d11b or 1.001b × 10b11b using binary numbers (or shorter 1.001 × 1011 if binary context is obvious). In E-notation, this is written as 1.001bE11b (or shorter: 1.001E11) with the letter E now standing for "times two (10b) to the power" here. In order to better distinguish this base-2 exponent from a base-10 exponent, a base-2 exponent is sometimes also indicated by using the letter B instead of E,[25] a shorthand notation originally proposed by Bruce Alan Martin of Brookhaven National Laboratory in 1968,[26] as in 1.001bB11b (or shorter: 1.001B11). For comparison, the same number in decimal representation: 1.125 × 23 (using decimal representation), or 1.125B3 (still using decimal representation). Some calculators use a mixed representation for binary floating point numbers, where the exponent is displayed as decimal number even in binary mode, so the above becomes 1.001b × 10b3d or shorter 1.001B3.[25]

This is closely related to the base-2 floating-point representation commonly used in computer arithmetic, and the usage of IEC binary prefixes (e.g. 1B10 for 1×210 (kibi), 1B20 for 1×220 (mebi), 1B30 for 1×230 (gibi), 1B40 for 1×240 (tebi)).

Similar to B (or b[27]), the letters H[25] (or h[27]) and O[25] (or o,[27] or C[25]) are sometimes also used to indicate times 16 or 8 to the power as in 1.25 = 1.40h × 10h0h = 1.40H0 = 1.40h0, or 98000 = 2.7732o × 10o5o = 2.7732o5 = 2.7732C5.[25]

Another similar convention to denote base-2 exponents is using a letter P (or p, for "power"). In this notation the significand is always meant to be hexadecimal, whereas the exponent is always meant to be decimal.[28] This notation can be produced by implementations of the printf family of functions following the C99 specification and (Single Unix Specification) IEEE Std 1003.1 POSIX standard, when using the %a or %A conversion specifiers.[28][29] Starting with C++11, C++ I/O functions could parse and print the P-notation as well. Meanwhile, the notation has been fully adopted by the language standard since C++17.[30] Apple's Swift supports it as well.[31] It is also required by the IEEE 754-2008 binary floating-point standard. Example: 1.3DEp42 represents 1.3DEh × 242.

Engineering notation can be viewed as a base-1000 scientific notation.

See also

References

  1. Yadin, Aharon (2016), Computer Systems Architecture, Chapman & Hall/CRC Textbooks in Computing, CRC Press, p. 68−69, ISBN 1482231069.
  2. "CODATA Value: Elementary charge e". CODATA 2014: The NIST Reference on Constants, Units, and Uncertainty: Fundamental Physical Constants. NIST. 2014-06-25. Archived from the original on 2017-06-25. Retrieved 2017-06-25.
  3. Edwards, John (2009), Submission Guidelines for Authors: HPS 2010 Midyear Proceedings (PDF), McLean, Virginia: Health Physics Society, p. 5, retrieved 2013-03-30
  4. "Primitive Data Types (The Java Tutorials > Learning the Java Language > Language Basics)". Oracle Corporation. Retrieved 2012-03-06.
  5. Davidson, Jim (January 1976). Nelson, Richard J., ed. "unknown". 65 Notes. 3 (1): 4. V3N1P4.
  6. Vanderburgh, Richard C., ed. (November 1976). "Decapower" (PDF). 52-Notes - Newsletter of the SR-52 Users Club. Dayton, Ohio, USA. 1 (6): 1. V1N6P1. Archived (PDF) from the original on 2017-05-28. Retrieved 2017-05-28. Decapower - In the January 1976 issue of 65-Notes (V3N1p4) Jim Davidson (HP-65 Users Club member #547) suggested the term "decapower" as a descriptor for the power-of-ten multiplier used in scientific notation displays. I'm going to begin using it in place of "exponent" which is technically incorrect, and the letter D to separate the "mantissa" from the decapower for typewritten numbers, as Jim also suggests. For example, 123−45 [sic] which is displayed in scientific notation as 1.23 -43 will now be written 1.23D-43. Perhaps, as this notation gets more and more usage, the calculator manufacturers will change their keyboard abbreviations. HP's EEX and TI's EE could be changed to ED (for enter decapower). (NB. The term decapower was frequently used in subsequent issues of this newsletter up to at least 1978.)
  7. "UH Mānoa Mathematics » Fortran lesson 3: Format, Write, etc.". Math.hawaii.edu. 2012-02-12. Retrieved 2012-03-06.
  8. SHARP Taschencomputer Modell PC-1280 Bedienungsanleitung [SHARP Pocket Computer Model PC-1280 Operation Manual] (PDF) (in German). Sharp Corporation. 1987. pp. 56–60. 7M 0.8-I(TINSG1123ECZZ)(3). Archived (PDF) from the original on 2017-03-06. Retrieved 2017-03-06.
  9. SHARP Taschencomputer Modell PC-1475 Bedienungsanleitung [SHARP Pocket Computer Model PC-1475 Operation Manual] (PDF) (in German). Sharp Corporation. 1987. pp. 105–108, 131–134, 370, 375. Archived from the original (PDF) on 2017-02-25. Retrieved 2017-02-25.
  10. SHARP Pocket Computer Model PC-E500 Operation Manual. Sharp Corporation. 1989. 9G1KS(TINSE1189ECZZ).
  11. SHARP Taschencomputer Modell PC-E500S Bedienungsanleitung [SHARP Pocket Computer Model PC-E500S Operation Manual] (PDF) (in German). Sharp Corporation. 1995. 6J3KS(TINSG1223ECZZ). Archived (PDF) from the original on 2017-02-24. Retrieved 2017-02-24.
  12. 電言板5 PC-1490UII PROGRAM LIBRARY (in Japanese). 5. University Co-op. 1991. (NB. University Co-operative)
  13. 電言板6 PC-U6000 PROGRAM LIBRARY (in Japanese). 6. University Co-op. 1993. (NB. University Co-operative)
  14. Naur, Peter, ed. (1960). Report on the Algorithmic Language ALGOL 60. Copenhagen.
  15. http://i.stanford.edu/pub/cstr/reports/cs/tr/68/86/CS-TR-68-86.pdf
  16. "Revised Report on the Algorithmic Language Algol 68". September 1973. Retrieved 2007-04-30.
  17. The Unicode Standard
  18. http://education.ti.com/downloads/guidebooks/sdk/83p/sdk83pguide.pdf
  19. "SIMULA standard as defined by the SIMULA Standards Group - 3.1 Numbers". August 1986. Retrieved 2009-10-06.
  20. Samples of usage of terminology and variants: , , , , ,
  21. Mohr, Peter J.; Newell, David B.; Taylor, Barry N. (July–September 2016). "CODATA recommended values of the fundamental physical constants: 2014". Reviews of Modern Physics. 88 (3): 035009. arXiv:1507.07956Freely accessible. doi:10.1103/RevModPhys.88.035009.
  22. Luzum, Brian; Capitaine, Nicole; Fienga, Agnès; Folkner, William; Fukushima, Toshio; Hilton, James; Hohenkerk, Catherine; Krasinsky, George; Petit, Gérard; Pitjeva, Elena; Soffel, Michael; Wallace, Patrick (August 2011). "The IAU 2009 system of astronomical constants: The report of the IAU working group on numerical standards for Fundamental Astronomy". Celestial Mechanics and Dynamical Astronomy. 110 (4): 293–304. Bibcode:2011CeMDA.110..293L. doi:10.1007/s10569-011-9352-4.
  23. Various (2000). Lide, David R., ed. Handbook of Chemistry and Physics (81st ed.). CRC. ISBN 0-8493-0481-4.
  24. electronic hexadecimal calculator/converter SR-22 (PDF) (Revision A ed.). Texas Instruments Incorporated. 1974. p. 7. 1304-389 Rev A. Archived (PDF) from the original on 2017-03-20. Retrieved 2017-03-20. (NB. This calculator supports floating point numbers in scientific notation in bases 8, 10 and 16.)
  25. 1 2 3 4 5 6 Schwartz, Jake; Grevelle, Rick (2003-10-20) [1993]. HP16C Emulator Library for the HP48S/SX. 1.20 (1 ed.). Archived from the original on 2016-06-21. Retrieved 2015-08-15. (NB. This library also works on the HP 48G/GX/G+. Beyond the feature set of the HP-16C, this package also supports calculations for binary, octal, and hexadecimal floating-point numbers in scientific notation in addition to the usual decimal floating-point numbers.)
  26. Martin, Bruce Alan (October 1968). "Letters to the editor: On binary notation". Communications of the ACM. Associated Universities Inc. 11 (10): 658. doi:10.1145/364096.364107.
  27. 1 2 3 Schwartz, Jake; Grevelle, Rick (2003-10-21). HP16C Emulator Library for the HP48 - Addendum to the Operator's Manual. 1.20 (1 ed.). Archived from the original on 2016-06-21. Retrieved 2015-08-15.
  28. 1 2 "Rationale for International Standard - Programming Languages - C" (PDF). 5.10. April 2003. pp. 52, 153–154, 159. Archived (PDF) from the original on 2016-06-06. Retrieved 2010-10-17.
  29. The IEEE and The Open Group (2013) [2001]. "dprintf, fprintf, printf, snprintf, sprintf - print formatted output". The Open Group Base Specifications (Issue 7, IEEE Std 1003.1, 2013 ed.). Archived from the original on 2016-06-21. Retrieved 2016-06-21.
  30. "floating point literal". cppreference.com. Retrieved 2017-03-11. The hexadecimal floating-point literals were not part of C++ until C++17, although they can be parsed and printed by the I/O functions since C++11: both C++ I/O streams when std::hexfloat is enabled and the C I/O streams: std::printf, std::scanf, etc. See std::strtof for the format description.
  31. "The Swift Programming Language (Swift 3.0.1)". Guides and Sample Code: Developer: Language Reference. Apple Corporation. Lexical Structure. Archived from the original on 2017-03-11. Retrieved 2017-03-11.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.