Music technology (electronic and digital)

This 2009 photo shows music production using a digital audio workstation (DAW) with multi-monitor set-up.

Electronic and digital music technology is the use of electronic or digital instruments, computers, electronic effects units, software or digital audio equipment by a musician, composer, sound engineer, DJ or record producer to make, perform[1] or record music. The term usually refers to the use of electronic devices, electronic and digital instruments, computer hardware and computer software that is used in the performance, playback, recording, composition, sound recording and reproduction, mixing, analysis and editing of music.

Music technology is connected to both artistic and technological creativity. Musicians and music technology experts are constantly striving to devise new forms of expression through music, and they are physically creating new devices and software to enable them to do so. Although in the 2010s, the term is most commonly used in reference to modern electronic devices and computer software such as digital audio workstations and Protools digital sound recording software, electronic and digital musical technologies have precursors in the electric music technologies of the early 20th century, such as the electromechanical Hammond organ, which was invented in 1929. In the 2010s, the ontological range of music technology has greatly increased, and it may now be electronic, digital, software-based or indeed even purely conceptual.

Education

Professional training

Music technology is taught at many different educational levels, including college diplomas and university degrees at the undergraduate and graduate level. The study of music technology is usually concerned with the creative use of technology for creating new sounds, performing, recording, programming sequencers or other music-related electronic devices, and manipulating, mixing and reproducing music. Music technology programs train students for careers in "...sound engineering, computer music, audio-visual production and post-production, mastering, scoring for film and multimedia, audio for games, software development, and multimedia production."[2] Those wishing to develop new music technologies often train to become an audio engineer working in R&D.[3] Due to the increasing role of interdisciplinary work in music technology, individuals developing new music technologies may also have backgrounds or training in computer programming, computer hardware design, acoustics, record producing or other fields.

Use in music education

In the 2010s, electronic and digital music technologies are widely used to assist in music education for training students in high school, college and university music programs. Electronic keyboard labs are used for cost-effective beginner group piano instruction in colleges and universities.

History

Early pioneers included Luigi Russolo, Halim El-Dabh,[4] Pierre Schaeffer, Pierre Henry, Edgard Varèse, Karlheinz Stockhausen, Ikutaro Kakehashi,[5] and King Tubby.[6] Music technology has been and is being used in many modernist and contemporary experimental music situations to create new sound possibilities.

Synthesizers and drum machines

An early Minimoog synthesizer by R.A. Moog Inc. from 1970.

A synthesizer is an electronic musical instrument that generates electric signals that are converted to sound through instrument amplifiers and loudspeakers or headphones. Synthesizers may either imitate existing sounds (instruments, vocal, natural sounds, etc.), or generate new electronic timbres or sounds that did not exist before. They are often played with an electronic musical keyboard, but they can be controlled via a variety of other input devices, including music sequencers, instrument controllers, fingerboards, guitar synthesizers, wind controllers, and electronic drums. Synthesizers without built-in controllers are often called sound modules, and are controlled using a controller device.

Synthesizers use various methods to generate a signal. Among the most popular waveform synthesis techniques are subtractive synthesis, additive synthesis, wavetable synthesis, frequency modulation synthesis, phase distortion synthesis, physical modeling synthesis and sample-based synthesis. Other less common synthesis types include subharmonic synthesis, a form of additive synthesis via subharmonics (used by mixture trautonium), and granular synthesis, sample-based synthesis based on grains of sound, generally resulting in soundscapes or clouds. In the 2010s, synthesizers are used in many genres of pop, rock and dance music. Contemporary classical music composers from the 20th and 21st century write compositions for synthesizer.

The development of the modern synthesizer was spurred on by the invention of the miniaturized transistor in 1947. The lightweight transistors made it was possible to make synthesizers much more portable and complex. A new breed of synthesizers appeared, mainly in America. American inventor Robert Moog's synthesizer designs in the 1960s were a significant advancement in the field over its predecessors. This was partially owed to new technologies that became available, such as the newly developed semiconductors. These new instruments were less expensive and became available worldwide. These were capable of producing a vast range of complex sounds. Later versions often incorporated automatic rhythm units, called drum machines. They had more popularity than any synthesizer from the past. The release of Wendy Carlos' album Switched-On Bach in 1968 brought Moog's synthesizer to the general public's attention. The album demonstrated that besides creating strange sounds, the synthesizer could be used to make beautiful music.

In the 1970s, the American domination of the synthesizer market was relinquished to the Japanese,[7] with synthesizers made by Yamaha Corporation, Roland Corporation, Korg, Kawai and other companies. Yamaha's DX7 was one of the first mass-market, relatively inexpensive synthesizer keyboards. The DX7 is an FM synthesis based digital synthesizer manufactured from 1983 to 1989. It was the first commercially successful digital synthesizer.[8][9][10] Its distinctive sound can be heard on many recordings, especially pop music from the 1980s. The monotimbral, 16-note polyphonic DX7 was the moderately priced model of the DX series keyboard synthesizers. Over 200,000 of the original DX7 were made,[10][11][12] and it remains one of the best-selling synthesizers of all time.[9][13] The most iconic bass synthesizer is the Roland TB-303, widely used in acid house music. Other classic synthesizers include the Moog Minimoog, ARP Odyssey, Yamaha CS-80, Korg MS-20, Sequential Circuits Prophet-5, Fairlight CMI, PPG Wave, Roland TB-303, Roland Alpha Juno, Nord Modular and Korg M1.[14]

Drum machines

A Yamaha RY30 Drum Machine

A drum machine is an electronic musical instrument designed to imitate the sound of drums, cymbals, other percussion instruments, and often basslines. Drum machines either play back prerecorded samples of drums and cymbals or synthesized re-creations of drum/cymbal sounds in a rhythm and tempo that is programmed by a musician. Drum machines are most commonly associated with electronic dance music genres such as house music, but are also used in many other genres. They are also used when session drummers are not available or if the production cannot afford the cost of a professional drummer. In the 2010s, most modern drum machines are sequencers with a sample playback (rompler) or synthesizer component that specializes in the reproduction of drum timbres. Though features vary from model to model, many modern drum machines can also produce unique sounds, and allow the user to compose unique drum beats and patterns.

Electro-mechanical drum machines were first developed in 1949, with the invention of the Chamberlin Rhythmate. Transistorized electronic drum machines later appeared in the 1960s. The Ace Tone Rhythm Ace, created by Ikutaro Kakehashi, began appearing in popular music from the late 1960s, followed by drum machines from Korg and Ikutaro's later Roland Corporation also appearing in popular music from the early 1970s.[15] Sly and the Family Stone's 1971 album There's a Riot Goin' On helped to popularize the sound of early drum machines, along with Timmy Thomas' 1972 R&B hit "Why Can't We Live Together" and George McCrae's 1974 disco hit "Rock Your Baby" which used early Roland rhythm machines.[16]

Early drum machines sounded drastically different than the drum machines that gained their peak popularity in the 1980s and defined an entire decade of pop music. The most iconic drum machine was the Roland TR-808, widely used in hip hop and dance music. Other classic drum machines include the Alesis HR-16, Korg Mini Pops 120, E-MU SP-12, Elektron SPS1 Machinedrum, Roland CR-78, PAiA Programmable Drum Set, LinnDrum, Roland TR-909 and Oberheim DMX.[17]

Sampling technology

Digital sampling technology, introduced in the 1980s, has become a staple of music production in the 2000s. Devices that use sampling, record a sound digitally (often a musical instrument, such as a piano or flute being played), and replay it when a key or pad on a controller device (e.g., an electronic keyboard, electronic drum pad, etc.) is pressed or triggered. Samplers can alter the sound using various audio effects and audio processing. Sampling has its roots in France with the sound experiments carried out by Musique Concrete practitioners.

In the 1980s, when the technology was still in its infancy, digital samplers cost tens of thousands of dollars and they were only used by the top recording studios and musicians. These were out of the price range of most musicians. Early samplers include the 12-bit Toshiba LMD-649[18] and the 8-bit Emulator I in 1981. The latter's successor, the Emulator II (released in 1984), listed for $8,000.[19] Samplers were released during this period with high price tags, such as the K2000 and K2500.

The first affordable sampler, the AKAI S612, became available in the mid-1980s and retailed for US$895. Other companies soon released affordable samplers, including the Mirage Sampler, Oberheim DPX-1, and more by Korg, Casio, Yamaha, and Roland. Some important hardware samplers include the Akai Z4/Z8, Ensoniq ASR-10, Roland V-Synth, Casio FZ-1, Kurzweil K250, Akai MPC60, Ensoniq Mirage, Akai S1000, E-mu Emulator, and Fairlight CMI.[20]

One of the biggest uses of sampling technology was by hip-hop music DJs and performers in the 1980s. Before affordable sampling technology was readily available, DJs would use a technique pioneered by Grandmaster Flash to manually repeat certain parts in a song by juggling between two separate turntables. This can be considered as an early precursor of sampling. In turn, this turntablism technique originates from Jamaican dub music in the 1960s, and was introduced to American hip hop in the 1970s.

In the 2000s, most professional recording studios use digital technologies. In the 2010s, many samplers exist in the digital-only realm. This new generation of digital samplers are capable of reproducing and manipulating sounds. New genres of music have formed which would be impossible without sampling. Advanced sample libraries have made complete performances of orchestral compositions possible that sound similar to a live performance.[7] Modern sound libraries allow musicians to have the ability to use the sounds of almost any instrument in their productions.

MIDI

Several rack-mounted synthesizers that share a single controller
MIDI allows multiple instruments to be played from a single controller (often a keyboard, as pictured here), which makes stage setups much more portable. This system fits into a single rack case, but prior to the advent of MIDI. it would have required four separate, heavy full-size keyboard instruments, plus outboard mixing and effects units.

MIDI has been the musical instrument industry standard interface since the 1980s through to the present day.[5] It dates back to June 1981, when Roland Corporation founder Ikutaro Kakehashi proposed the concept of standardization between different manufacturers' instruments as well as computers, to Oberheim Electronics founder Tom Oberheim and Sequential Circuits president Dave Smith. In October 1981, Kakehashi, Oberheim and Smith discussed the concept with representatives from Yamaha, Korg and Kawai.[21] In 1983, the MIDI standard was unveiled by Kakehashi and Smith.[22][23]

At the NAMM show in Los Angeles of 1983, MIDI was released. A demonstration at the convention showed two previously incompatible analog synthesizers, the Prophet 600 and Roland Jupiter-6, communicating with each other, enabling a player to play one keyboard while getting the output from both of them. This was a massive breakthrough in the 1980s, as it allowed synths to be accurately layered in live shows and studio recordings. MIDI enables different electronic instruments and electronic music devices to communicate with each other and with computers. The advent of MIDI spurred a rapid expansion of the sales and production of electronic instruments and music software.

In 1985, several of the top keyboard manufacturers created the MIDI Manufacturers Association (MMA). This newly founded association standardized the MIDI protocol by generating and disseminating all the documents about it. With the development of the MIDI File Format Specification by Opcode, every music software company's MIDI sequencer software could read and write each other's files.

Since the 1980s, personal computers developed and became the ideal system for utilizing the vast potential of MIDI. This has created a large consumer market for software such as MIDI-equipped electronic keyboards, MIDI sequencers and Digital Audio Workstations. With universal MIDI protocols, electronic keyboards, sequencers, and drum machines can all be connected together.

Some universally accepted varieties of MIDI software applications include music instruction software, MIDI sequencing software, music notation software, hard disk recording/editing software, patch editor/sound library software, computer-assisted composition software, and virtual instruments. Current developments in computer hardware and specialized software continue to expand MIDI applications.

Computers in music technology

Computer and synthesizer technology joining together changed the way music is made, and is one of the fastest changing aspects of music technology today. Dr. Max Matthews, a telecommunications engineer at Bell Telephone Laboratories' Acoustic and Behavioural Research Department, is responsible for some of the first digital music technology in the 50s. Dr. Matthews also pioneered a cornerstone of music technology; analog to digital conversion.

The first generation of professional commercially available computer music instruments, or workstations as some companies later called them, were very sophisticated elaborate systems that cost a great deal of money when they first appeared. They ranged from $25,000 to $200,000.[19] The two most popular were the Fairlight, and the Synclavier.

It was not until the advent of MIDI that general-purpose computers started to play a role in music production. Following the widespread adoption of MIDI, computer-based MIDI editors and sequencers were developed. MIDI-to-CV/Gate converters were then used to enable analogue synthesizers to be controlled by a MIDI sequencer.[24]

Reduced prices in personal computers caused the masses to turn away from the more expensive workstations. Advancements in technology have increased the speed of hardware processing and the capacity of memory units. Software developers write new, more powerful programs for sequencing, recording, notating, and mastering music.

2000s

Music sequencer software, such as Pro Tools, Logic Audio and many others, are the most widely used form of contemporary music technology in the 2000s. Such programs allow the user to record acoustic sounds with a microphone, mix tracks record or MIDI musical sequences, which may then be organized along a timeline and edited on a flat-panel display of a computer or Digital Audio Workstation. Musical segments recorded on can be copied and duplicated ad infinitum, without any loss of fidelity or added noise (a major contrast from analog recording, in which every copy leads to a loss of fidelity and added noise). Digital music can be edited and processed using a multitude of audio effects. Contemporary classical music sometimes uses computer-generated sounds, either pre-recorded or generated/manipulated live, in conjunction or wikt:juxtaposition with classical acoustic instruments like the cello or violin. Classical and other notated types of music are frequently written on scorewriter software.

Many musicians and artists use 'patcher' type programmes, such as Pd, Bidule, Max/MSP, Kyma (sound design language) and Audiomulch as well as (or instead of) digital audio workstations or sequencers and there are still a significant number of people using more "traditional" software only approaches such as CSound or the Composers Desktop Project. Music technology includes many forms of music reproduction. Music and sound technology refer to the use of sound engineering in a commercial, experimental or amateur hobbyist manner. Music technology and sound technology may sometimes be classed as the same thing, but they actually refer to different fields of work. Sound engineering refers primarily to the use of sound technology for sound recording or in sound reinforcement systems used in concerts and live shows.

Timeline

See also

Notes

  1. m:tech educational services. "What is Music Technology?". Retrieved 20 June 2013.
  2. http://steinhardt.nyu.edu/music/technology
  3. wiseGeek. "What Is Audio Engineering?". Retrieved 17 May 2013.
  4. 1 2 Holmes, Thom (2008). "Early Synthesizers and Experimenters". Electronic and experimental music: technology, music, and culture (3rd ed.). Taylor & Francis. p. 156. ISBN 0-415-95781-8. Retrieved 2011-06-04.
  5. 1 2 The life and times of Ikutaro Kakehashi, the Roland pioneer modern music owes everything to, Fact
  6. 1 2 Michael Veal (2013), Dub: Soundscapes and Shattered Songs in Jamaican Reggae, pages 26-44, "Electronic Music in Jamaica", Wesleyan University Press
  7. 1 2 Campbell, Murray; Greated, Clive; Myers, Arnold. Musical Instruments. New York: Oxford University Press.
  8. Edmondson, Jacqueline, ed. (2013). Music in American Life: An Encyclopedia of the Songs, Styles, Stars, and Stories that Shaped our Culture [4 volumes]. ABC-CLIO. p. 398. ISBN 9780313393488. In 1967, John Chowning, at Stanford University, accidentally discovered frequency modulation (FM) synthesis when experimenting with extreme vibrato effects in MUSIC-V. ... By 1971 he was able to use FM synthesis to synthesizer musical instrument sounds, and this technique was later used to create the Yamaha DX synthesizer, the first commercially successful digital synthesizer, in the early 1980s.
  9. 1 2 Shepard, Brian K. (2013). Refining Sound: A Practical Guide to Synthesis and Synthesizers. Oxford University Press. ISBN 9780199376681. The first digital synthesizer to make it into the studios of everyone else, the Yamaha DX7, became one of the most commercially successful synthesizers of all time.
  10. 1 2 3 Pinch, T. J.; Bijsterveld, Karin (July 2003). ""Should One Applaud?" Breaches and Boundaries in the Reception of New Technology in Music". Technology and Culture. 44 (3): 536–559. doi:10.1353/tech.2003.0126. By the time the first commercially successful digital instrument, the Yamaha DX7 (lifetime sales of two hundred thousand), appeared in 1983 ... (Note: the above sales number seems about whole DX series)
  11. Johnstone, Robert. "The sound of one chip clapping: Yamaha and FM synthesis". MIT Japan Program: Science, Technology, Management. Center for International Studies, Massachusetts Institute of Technology. MIT JP 94-09.
  12. http://www.sonicstate.com/news/2015/01/26/namm-2015-video-yamaha-vintage-synth-museum-tour/
  13. Holmes, Thom (2008). "Early Computer Music". Electronic and experimental music: technology, music, and culture (3rd ed.). Taylor & Francis. p. 257. ISBN 0415957818. Retrieved 2011-06-04.
  14. Twells, John. "The 14 Synthesizers that Shaped Modern Music". Fact Music News. Archived from the original on 2014-03-06. Retrieved December 8, 2015.
  15. 1 2 3 4 Reid, Gordon (2004), "The History Of Roland Part 1: 19301978", Sound on Sound (November), retrieved 19 June 2011
  16. Mike Collins (2014), In the Box Music Production: Advanced Tools and Techniques for Pro Tools, page 320, CRC Press
  17. Felton, David. "Top Ten Classic Drum Machines". Attack Magazine. Retrieved December 8, 2015.
  18. Rockin'f, March 1982, pages 140-141
  19. 1 2 Kettlewell, Ben (2002). Electronic Music Pioneers. USA: Pro Music Press.
  20. Solida, Scot. "The 10 most important hardware samplers in history". Music Radar. Retrieved December 8, 2015.
  21. Chadabe, Joel (1 May 2000). "Part IV: The Seeds of the Future". Electronic Musician. Penton Media. XVI (5).
  22. "Technical GRAMMY Award: Ikutaro Kakehashi And Dave Smith". 29 January 2013.
  23. "Ikutaro Kakehashi, Dave Smith: Technical GRAMMY Award Acceptance". 9 February 2013.
  24. 1 2 Russ, Martin (2012). Sound Synthesis and Sampling. CRC Press. p. 192. ISBN 1136122141. Retrieved 26 April 2017.
  25. "The Wire, Volumes 275-280", The Wire, p. 24, 2007, retrieved 2011-06-05
  26. Matt Dean (2011), The Drum: A History, page 390, Scarecrow Press
  27. http://www.factmag.com/2016/09/22/the-14-drum-machines-that-shaped-modern-music/
  28. "Automatic rhythm instrument".
  29. "Donca-Matic (1963)". Korg Museum. Korg.
  30. Russell Hartenberger (2016), The Cambridge Companion to Percussion, page 84, Cambridge University Press
  31. Thomas Fine (2008). "The dawn of commercial digital recording" (PDF). ARSC Journal. 39 (1): 1–17.
  32. Billboard, May 21, 1977, page 140
  33. Peter Manning, Electronic and Computer Music, page 264, Oxford University Press
  34. Yamaha GX-1, Vintage Synth Explorer
  35. "[Chapter 2] FM Tone Generators and the Dawn of Home Music Production". Yamaha Synth 40th Anniversary - History. Yamaha Corporation. 2014.
  36. Mark Vail, The Synthesizer: A Comprehensive Guide to Understanding, Programming, Playing, and Recording the Ultimate Electronic Music Instrument, page 277, Oxford University Press
  37. Impact of MIDI on electroacoustic art music, Issue 102, page 26, Stanford University
  38. Wells, Peter (2004), A Beginner's Guide to Digital Video, AVA Books, p. 18, ISBN 2-88479-037-3, retrieved 2011-05-20
  39. "Firstman International". SYNRISE (in German). Archived from the original on 2003-04-20. FIRSTMAN existiert seit 1972 und hat seinen Ursprung in Japan. Dort ist dieFirma unter dem Markennamen HILLWOOD bekannt. HILLWOOD baute dann auch 1973 den quasi ersten Synthesizer von FIRSTMAN. Die Firma MULTIVOX liess ihre Instrumente von 1976 bis 1980 bei HILLWOOD bauen.","SQ-10 / mon syn kmi ? (1980) / Monophoner Synthesizer mit wahrscheinlich eingebautem Sequenzer. Die Tastatur umfasst 37 Tasten. Die Klangerzeugung beruht auf zwei VCOs.
  40. Mark Jenkins (2009), Analog Synthesizers, pages 107-108, CRC Press
  41. A TALE OF TWO STRING SYNTHS, Sound on Sound, July 2002
  42. Vine, Richard (15 June 2011). "Tadao Kikumoto invents the Roland TB-303". The Guardian. Retrieved 9 July 2011.
  43. Rockin'f, March 1982, pages 140-141
  44. 1 2 Martin Russ. Sound synthesis and sampling. p. 66.
  45. https://www.roland.com/ca/company/history/
  46. Roland MC-202 MicroComposer, Electronic Musician, November 2001

References

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.