Edge-notched card

Edge-notched cards are an obsolete technology used to store a small amount of binary or logical data, encoded into the presence or absence of notches in the edges of paper index cards. The notches allowed efficient sorting and selecting of specific cards matching desired criteria, from a larger number of cards in a paper-based database of information.


Edge-notched cards or McBee cards

These are a manual data storage and manipulation technology used for specialized data storage and cataloging applications through much of the 20th century. The first appearance of this methodology was in 1904.[1] While there were many variants, a popular version consisted of 5-by-8-inch (13 by 20 cm) paperboard cards with holes punched at regular intervals along all four edges, a short distance in from the edges. The center of the card might be blank space for information to be written, or contain a pre-printed form.

Hand tool for notching cards.

To record data, the paper stock between a hole and the nearest edge was removed by a special notching tool. The holes were assigned a meaning dependent upon a particular application. For example, one hole might record the answer to a yes/no question on a survey, with the presence of a notch meaning "yes". More-complex data was encoded using a variety of schemes, often using a superimposed code which allows more distinct categories to be coded than the number of holes available.

To allow a visual check that all cards in a deck were oriented the same way, one corner of each card was beveled, much like Hollerith punched cards. Edge-notched cards, however, were not intended to be read by machines. Instead, they were manipulated by passing one or more slim needles through selected holes in a group of cards. As the needles were lifted, the cards that were notched in the hole positions where the needles were inserted would be left behind as rest of the deck was lifted by the needles. Using two or more needles produced a logical and function. Combining the cards from two different selections produced a logical or. Quite complex manipulations, including sorting were possible using these techniques.

Before the widespread use of computers, some public libraries used a system of small edge-notched cards in paper pockets in the back of library books to keep track of them.

Needle cards

Needle cards are index cards with text, written by hand or typewriter, that have a line of prepunched holes along one or more sides. By cutting or punching away (notching out) the paper between a hole and the edge of the card, the card is associated with a category. By putting long (knitting) needles through certain holes in a deck of such cards, lifting and shaking gently, cards that belong to a combination of categories can be selected. This tool is less useful for data sets larger than 10,000 records.[2]

Affectionately referred to as "The Knitting Needle Computer", these database-like systems were popular sometime in the 1960s and 1970s. Science teachers may still use these as a teaching tool for relational databases. Indexed card systems can be made with index cards and a hole punch.

Edge-notched card used as a library card. Edges not notched here.
A notched card showing two levels of notching.

See also

References

  1. ↑ Casey, 1958, p.4
  2. ↑ Sture Allén, Språklig databehandling (1970), page 19.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.