DOS extender

Tenberry Software's DOS/4GW startup banner

A DOS extender is a computer software program running under DOS that enables software to run in a protected mode environment even though the host operating system is only capable of operating in real mode.

DOS extenders were initially developed in the 1980s following the introduction of the Intel 80286 processor (and later expanded upon with the Intel 80386), to cope with the memory limitations of MS-DOS and its derivatives.

DOS extender operation

A DOS extender is a program that "extends" DOS so that programs running in protected mode can transparently interface with the underlying MS-DOS API. This was necessary because many of the functions provided by DOS require 16-bit segment and offset addresses pointing to memory locations within the first 640 kilobytes of memory. Protected mode, however, uses an incompatible addressing method where the segment registers (now called selectors) are used to point to an entry in the Global Descriptor Table which describes the characteristics of the segment. The two methods of addressing are mutually exclusive, with the processor having to make costly switches to real (or V86) mode to service non-protected mode requests.

In addition to setting up the environment and loading the actual program to be executed, the DOS extender also provides (amongst other things) a translation layer that maintains buffers allocated below the 1MB real mode memory barrier. These buffers are used to transfer data between the underlying real mode operating system and the protected mode program. Since switching between real/V86 mode and protected mode is a relatively time consuming operation, the extender attempts to minimize the number of switches by duplicating the functionality of many real mode operations within its own protected mode environment. As DOS uses interrupts extensively for communication between the operating system and user level software, DOS extenders intercept many of the common hardware (e.g. the real-time clock and keyboard controller) and software (e.g. DOS itself and the mouse API) interrupts. Some extenders also handle other common interrupt functions, such as video BIOS routines.

Essentially, a DOS extender is like a miniature operating system, handling much of the functionality of the underlying operating system itself.

Development history

Tenberry Software's DOS/4G product logo

The DOS extender was arguably invented by Phar Lap, but it was Tenberry Software's (formerly Rational Systems) 386 extender DOS/4GW that brought protected mode DOS programs to a mass market. Included with Watcom's C, C++, and Fortran compilers for 386 class processors, it soon became a ubiquitous mainstay of PC applications and games such as id Software's successful Doom.

While initially it was the memory-hungry business applications that drove the development of DOS extenders, it would be PC games that truly brought them into the spotlight. As a result of the development of DOS extenders, two new software interfaces were created to take care of the many potential conflicts that could arise from the varied methods of memory management that already existed, as well as provide a uniform interface for client programs.

The first of these interfaces was the Virtual Control Program Interface (VCPI), but this was rapidly overshadowed by the DOS Protected Mode Interface (DPMI) specification, which grew from the Windows 3.0 development.[1] They provided an API through which an extended program could interface with real mode software, allocate memory, and handle interrupt services. They also provided an easy method for the extender to set up the switch to protected mode, and allowed multiple protected mode programs to coexist peacefully.

DOS extenders

Notable DOS extended applications

References

  1. ↑ Duncan, Ray; Petzold, Charles; Schulman, Andrew; Baker, M. Steven; Nelson, Ross P.; Davis, Stephen R.; Moote, Robert (1992). Extending DOS: A Programmer's Guide to Protected-Mode DOS (2nd ed.). Addison-Wesley Publishing Company, Inc. pp. 433–462. ISBN 0-201-56798-9.
  2. ↑ Williams, Al (October 1990). "Roll your own DOS extender: Part I". Dr. Dobb's Journal. CMP Technology. 15 (10): 16–18, 20, 24. ISSN 1044-789X.
  3. ↑ Williams, Al (November 1990). "Roll Your Own DOS Extender: Part II". Dr. Dobb's Journal. CMP Technology. 15 (11): 74, 76, 80, 81–83, 85, 122–128, 130. ISSN 1044-789X.
  4. ↑ Williams, Al (1991). DOS 5 A Developer's Guide. Markt&Technik. ISBN 1-55851-177-6.
  5. ↑ Williams, Al (1993). DOS 6 A Developer's Guide. Markt&Technik. ISBN 1-55851-309-4.
  6. ↑ Williams, Al (1993). DOS and Windows Protected Mode: Programming with DOS Extenders in C. Addison-Wesley. p. 30. ISBN 0-201-63218-7.
  7. ↑ FTN77 Fortran Compiler
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.