Doppelmayr USA

Doppelmayr USA
Subsidiary
Founded 2002
Headquarters Salt Lake City, Utah
Key people
 Mark Bee, President
Website doppelmayrusa.com
The former Doppelmayr CTEC logo as seen on a lift.

Doppelmayr USA is an aerial lift manufacturer based in Salt Lake City, Utah, and Saint-Jérôme, Quebec, and a subsidiary of the worldwide Doppelmayr Garaventa Group. The North America company was formed in 2002 after the merger of Garaventa of Goldau, Switzerland, and Doppelmayr of Wolfurt, Austria.[1] Its only competitor is Leitner-Poma. Between 2002 and 2010, the company was named Doppelmayr CTEC.

CTEC before merger

A CTEC chairlift at Moonlight Basin, Montana.

CTEC, which stands for Cable Transportation Engineering Company, was the successor to Thiokol, a company which built 41 ski lifts between 1971 and 1977.[2] By 1977, Thiokol had decided to stop producing ski lifts and sold their designs to two employees, Jan Leonard and Mark Ballantyne.[3]

CTEC's first lift produced as an independent manufacturer was at Seven Springs Mountain Resort, Pennsylvania, in 1978.[4] Leonard oversaw engineering at the company's Salt Lake City facility while manufacturing was performed in Sacramento, California, where Ballantyne worked.[3] CTEC slowly grew to become one of three major lift manufacturers in North America along with European-owned Doppelmayr USA and Poma of America. In 1989, CTEC partnered with Von Roll to build its first detachable chairlift at Solitude Mountain Resort, Utah.[5]

From 1990 onwards, CTEC used detachable grips built by the Swiss company Garaventa. In 1992, CTEC and Garaventa merged and the new company was named Garaventa CTEC. Prior to the merger, Garaventa had built only a few lifts in North America, including Aerial Trams at Snowbird, Utah, and Squaw Valley Ski Resort, California. The combined company utilized the designs and manufacturing facilities of CTEC since Garaventa never had much of a presence in North America besides supplying parts to CTEC. CTEC's growing reputation combined with the European ownership and parts supply of Garaventa allowed it to win contracts for large lifts such as the Gold Coast Funitel at Squaw Valley, Placer County, California, gondolas at Telluride Ski Resort and Vail Ski Resort, and Steamboat Springs Ski Resort in Colorado, and Deer Valley, Utah, .[6] In 1999, Ballantyne left the company to form a window and door distribution company but Leonard remained president.

Doppelmayr USA before merger

Doppelmayr was a world-renowned Austrian ropeway manufacturer that began exporting surface lifts to North America in the 1950s under the name "Alpine Lift." The first Doppelmayr chairlift in North America was installed at Marmot Basin, Alberta, in 1968.[7] Doppelmayr's first North American manufacturing facility in Saint-Jérôme, Quebec, opened in 1978.

Unlike its competitors, Doppelmayr used exclusively European designs in North America. The company built the world's first detachable high speed quad chairlift in 1981 at Breckenridge Ski Resort in Colorado.[8] As detachable lifts became increasingly popular, Doppelmayr's market share and reputation increased.

In 1996, Doppelmayr's European holding company purchased the ropeway department of Von Roll, a Swiss manufacturer which had been making lifts in North America since the mid-1980s. More importantly, Von Roll owned Hall Ski-Lift, a domestic company that produced more than 400 lifts from 1960 to 1985. Doppelmayr now controlled all the spare parts sales for Doppelmayr, Von Roll, and Hall brand lifts.

Merger of Doppelmayr and Garaventa CTEC

A Doppelmayr CTEC Uni-GS model Detachable Chairlift at Spanish Peaks, Montana, built in 2005.
The Mountaintop Express lift at Vail Ski Resort, Colorado, a typical Doppelmayr Uni-G model high speed six pack, built in 2013

In 2002, Garaventa of Switzerland merged with Doppelmayr of Austria, forming the world's largest aerial lift manufacturer. The new company would be known as the Doppelmayr Garaventa Group in Europe and Doppelmayr CTEC in North America.[9] Consolidation resulted in the closure of CTEC's Sacramento manufacturing facility and Doppelmayr's Golden, Colorado, office. Functions were consolidated into an expanded Salt Lake City headquarters.

Starting in 2003, Doppelmayr CTEC produced a new line of products that combined the best designs of Doppelmayr and CTEC. The Uni-GS detachable chairlift terminal design was specifically designed for the North American market and incorporated elements of Garaventa CTEC's Stealth line and Doppelmayr's Uni line. Many of CTEC's fixed grip designs were kept. Today, manufacturing of fixed grip chairlift terminals and all tower tubes and chairs is done at Doppelmayr CTEC's Salt Lake City factory, while all line equipment and detachable terminals are made in the Quebec plant.[10] Jan Leonard, president of Garaventa CTEC became president of the new company, and Doppelmayr USA's Mark Bee became Executive VP.

After the merger

In 2003, the company installed its first UNI-GS detachable chairlift, the Panorama Quad, at Gunstock Mountain Resort in Gilford, New Hampshire.[11]

In 2003, the company was selected to design, fabricate, install and maintain the Portland Aerial Tram at a cost of $57 million.[12]

In 2005, the company purchased Partek, a small chairlift manufacturer based in Pine Island, New York. Also included in the purchase were Partek's rights to Borvig lifts.[13]

Jan Leonard stepped down as president of the company in October 2007 to start a new company, Skytrac Lifts. He was replaced by VP Mark Bee.[14]

In 2007 and 2008, Doppelmayr CTEC constructed two notable lifts at Jackson Hole, Wyoming, and Whistler Blackcomb, British Columbia. The new tram at Jackson Hole cost $28 million and replaced the iconic original Jackson Hole Tram.[15] Whistler-Blackcomb's Peak 2 Peak Gondola is the largest lift of its kind in the world, breaking multiple world records and costing CDN $52 million.[16]

On January 1, 2011, the company dropped CTEC from its name to become Doppelmayr USA. Subsequently, chairlifts built since 2011 have utilized the Doppelmayr logo used prior to the 2002 merger.

Designs[17]

See also

References

  1. ↑ http://www.doppelmayr.com/default.php?lid=2&frs=210
  2. ↑ "Archived copy". Archived from the original on 2009-03-28. Retrieved 2009-04-22.
  3. 1 2 "Archived copy". Archived from the original on 2009-05-03. Retrieved 2009-04-22.
  4. ↑ "Archived copy". Archived from the original on 2009-03-28. Retrieved 2009-04-22.
  5. ↑ "Archived copy". Archived from the original on 2005-02-06. Retrieved 2009-04-22.
  6. ↑ "Archived copy". Archived from the original on 2006-09-08. Retrieved 2007-02-24.
  7. ↑ http://www.skilifts.org/old/install_na1968.htm#canada
  8. ↑ "Archived copy". Archived from the original on 2009-03-28. Retrieved 2009-04-22.
  9. ↑ Blevins, Jason (23 August 2001). "Merger Leaves World with Just Two Major Ski-Lift Manufacturers". The Denver Post.
  10. ↑ http://www.doppelmayrctec.com/
  11. ↑ http://www.gunstock.com/mountain/trail_maps/
  12. ↑ "Archived copy". Archived from the original on 2009-07-22. Retrieved 2009-04-22.
  13. ↑ http://www.saminfo.com/news/article.php?tid=129
  14. ↑ http://www.saminfo.com/news/article.php?tid=2164
  15. ↑ http://www.tram-formation.com//index.php?option=com_content&task=view&id=33&Itemid=67
  16. ↑ "Archived copy". Archived from the original on 2009-04-26. Retrieved 2009-04-22.
  17. ↑ "Doppelmayr CTEC Identification Sheet". Skilifts.org. Retrieved 25 September 2011.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.