Birch reduction

Birch reduction
Named after Arthur Birch
Reaction type Organic redox reaction
Identifiers
Organic Chemistry Portal birch-reduction
RSC ontology ID RXNO:0000042

The Birch reduction is an organic reaction which is particularly useful in synthetic organic chemistry. The reaction was reported in 1944 by the Australian chemist Arthur Birch (1915–1995) working in the Dyson Perrins Laboratory in the University of Oxford,[1][2][3][4][5][6] building on earlier work by Wooster and Godfrey in 1937.[7] It converts aromatic compounds having a benzenoid ring into a product, 1,4-cyclohexadienes, in which two hydrogen atoms have been attached on opposite ends of the molecule. It is the organic reduction of aromatic rings in liquid ammonia with sodium, lithium or potassium and an alcohol, such as ethanol and tert-butanol. This reaction is quite unlike catalytic hydrogenation, which usually reduces the aromatic ring all the way to a cyclohexane.

The original reaction reported by Arthur Birch in 1944 used sodium and ethanol.[1][2][3] Alfred L. Wilds later discovered that lithium gives better yields.[8] Also the use of tert-butyl alcohol has become common. The reaction is widely used in synthetic organic chemistry.

An example is the reduction of naphthalene:[9]

Several reviews have been published.[10][11][12][13]

Basic reaction mechanism

A solution of sodium in liquid ammonia consists of the electride salt [Na(NH3)x]+ e, which has an intense blue color. The solvated electrons add to the aromatic ring to give a radical anion. The added alcohol supplies a proton to the radical anion and also to the penultimate carbanion; for most substrates ammonia is not acidic enough.[14]

Regioselectivity

The reduction of anisole is one of the simplest examples and is shown in equation 1. The reduction of benzoic acid is illustrated in equation 2.

The location on the ring where the radical anion is initially protonated determines the structure of the product. With an electron donor such as methoxy (MeO), alkyl protonation has been thought by some investigators as being ortho (i.e. adjacent or 1,2) to the substituent. Other investigators have thought the protonation is meta (1,3) to the substituent. Arthur Birch favored meta protonation. With electron withdrawing substituents, protonation has been thought to occur at the site of the substituent (ipso) or para (1,4), but this is also unclear. A. J. Birch's empirical rules say that for the donor substituents the final product has the maximum number of substituents on the final double bonds. For electron withdrawing groups the double bonds of the product avoid the substituents. The placement preference of groups during the reaction and in the final product is termed regioselectivity.


Overall details of the reaction mechanism

The solution of metal in ammonia provides electrons which are taken up by the aromatic ring to form the corresponding radical anion B in the first step of the reaction. This is followed by protonation by the alcohol to form a cyclohexadienyl radical C. Next, a second electron is transferred to the radical to form a cyclohexadienyl carbanion D. In the last step a second proton leads the cyclohexadienyl carbanion to the unconjugated cyclohexadienyl product. These steps are outlined below for the case of anisole.

The reaction is known to be third order – first order in aromatic, first order in the alkali metal, and first order in the alcohol.[15] This requires that the rate-limiting step be the conversion of radical anion B to the cyclohexadienyl radical C.

Reaction regioselectivity

The Birch reduction has several intricate mechanistic features. These features govern the reaction's regioselectivity and are considered below. Birch's rule for aromatics with electron donors such as methoxyl or alkyl is that the product will have the residual double bonds bearing the maximum number of substituents. For aromatics with electron withdrawing groups such as carboxyl, the substituent groups avoid the double bonds. In both cases, with electron donating and with withdrawing groups, the residual double bonds are unconjugated (see below). The reaction mechanisms accounting for this regioselectivity are a topic of great scientific interest. The essential features are:

Mechanism

The mechanism of the Birch reduction has been the subject of much discussion. The original mechanism of the Birch reduction invoked protonation of a radical anion that was meta to the ring methoxy and alkyl groups. It further propose that the last step, protonation of a cyclohexadienyl anion, occurred ortho with respect to these substituents. Birch's original mechanism was based on qualitative reasoning, namely that the radical anion's electron density, resulting from the addition of an electron, would be highest meta to an electron donor (such as methoxy or methyl) due to avoiding the usual ortho-para high density in the neutral species.[1]

In 1961, simple Hückel computations showed that Birch's proposed mechanism was incorrect. The correct mechanism O is depicted below.[16][17] The two a-priori alternative mechanisms O and M:

Birch did not accept this conclusion and continued suggesting meta protonation of the radical anion. He suggested the meta attack results from "opposition of the ortho and para initial charge".[18] Bothner-By in 1959 had given qualitative arguments favoring meta-protonation[15] as had been suggested previously by Birch.

Burnham in 1969 concluded that protonation is unlikely to occur predominantly at the ortho position and the reaction most probably occurs at the meta position but may occur at both sites at similar rates.[19]

Subsequently, Birch, in a review article,[20] noted that no experimental method at the time existed that would distinguish the correct mechanism. But he did note that publication by Burnham[19] favored meta attack.

In 1980 publications Birch collaborated with Leo Radom in a study that concluded that electron densities at the ortho and meta positions to be close with a slight ortho preference, but with mixtures of ortho and meta protonation occurring.[21][22] RHF/sto-3g and UHF/sto-3g computations were used to conclude that both ortho and meta substitutions would occur with a slight preference for ortho.[21][22]

Experimental testing and computational verification

Then in 1990 and 1993 a method was finally devised to experimentally assess whether the anisole and toluene radical anion protonated ortho or meta.[23][24] The esoteric method began with the premise that the isotope selectivity in protonation in a protium–deuterium medium would be greater for the radical anion, of the first protonation step, than for the carbanion of the penultimate step. The reasoning was that carbanions are much more basic than the corresponding radical anions and thus will react more exothermically and less selectively in protonation. Experimentally it was determined that less deuterium at the ortho site than meta resulted (1:7) for a variety of methoxylated aromatics. This is a consequence of the greater selectivity of the radical anion protonation. Computations (e.g. ROHF/6-31g) of the electron densities concurred with the experimental observations. Also, it was ascertained that frontier orbital densities did not, and these had been used in some previous reports.

Subsequently, in 1992 and 1996 Birch published twice still suggesting that meta protonation was preferred.[25][26] This was a reversal of his earlier views as published with Leo Radom.

However, textbooks, publishing on the mechanism of the Birch Reduction, have noted that ortho protonation of the initial radical anion is preferred.[27]

Birch reduction with electron withdrawing substituents

In contrast to the examples with electron donating substituents, the case with withdrawing groups is more readily obvious. Thus, as depicted below, the structure of the penultimate dianion D is characterized by its being subject to trapping by alkyl halides.

Mechanism of reduction of benzoic acids, including possible alkylation

This dianion results independent of whether alcohol is used in the reduction or not. Thus the initial protonation by tert-butyl alcohol or ammonia is para rather than ipso as seen in the step from B to C.[28][29][30]

Second step of the Birch reduction with regiochemistry giving unconjugated cyclohexadienes

The second step of the Birch reduction affording unconjugated cyclohexadienes also poses mechanistic questions. Thus as shown in the figure below there are three resonance structures B, C and D for the carbanion. Simple Hückel computations lead, as noted in the first entry of the table below, to equal electron densities at the three atoms 1, 3 and 5. However, in contrast to densities the Hückel computation is less naïve about bond orders,[16][31][32] and bonds 2–3 and 5–6 will be shortened as shown in the first entry of the table. With bond orders modifying simple exchange integrals in a Mulliken-Wheland-Mann computation it was shown that electron density at the central atom 1 become largest.[31][32] More modern RHF computations lead to the same result.[23][24]

Electron introduction to benzene and 3 resonance structures for the carbanion of the second step, and central protonation to give the unconjugated diene:

Five carbons of the cyclohexadienyl anion.[31][32]

Approximation Density Atom 3 Density Atom 2 Density Atom 1 Bond Order 2–3 Bond Order 1–2
Hückel (1st approx) 0.333 0.00 0.333 0.788 0.578
2nd approx 0.317 0.00 0.365 0.802 0.564
3rd approx 0.316 0.00 0.368 0.802 0.562

There are known precedents for central anion protonation.[16][33] Thus conjugated enolates as C=C-C=C-O- have been known for some time as kinetically protonating in the center of the enolate system to afford the β,γ-unsaturated carbonyl compound under conditions where the anion, and not the enol, is the species protonated.

Birch alkylation

In the presence of an alkyl halide the carbanion can also undergo nucleophilic substitution with carbon-carbon bond formation. In substituted aromatic compounds an electron-withdrawing substituent, such as a carboxylic acid,[34] stabilizes a carbanion and the least-substituted olefin is generated. With an electron-donating substituent the opposite effect is obtained.[35] The reaction produces more of the less thermodynamically stable non-conjugated 1,4-addition product than the more stable conjugated 1,3-diene because the largest orbital coefficient of the HOMO of the conjugated pentadienyl anion intermediate is on the central carbon atom. Once formed, the resulting 1,4-cyclohexadiene is unable to equilibrate to the thermodynamically more stable product; therefore, the observed kinetic product is produced. Experimental alkali metal alternatives that are safer to handle, such as the M-SG reducing agent, also exist.

In Birch alkylation the anion formed in the Birch reduction is trapped by a suitable electrophile such as a haloalkane, for example:[36]


In the reaction depicted below, 1,4-dibromobutane is added to tert-butyl benzoate to form an alkylated 1,4-cyclohexadiene product:[37]

Modifications

Since liquid ammonia has to be condensed into the flask and has to evaporate overnight after the reaction is complete, the whole procedure can be quite troublesome and time-consuming. However, alternative solvents have been employed, such as THF[38][39] as well as a mixture of n-propylamine and ethylenediamine,[40] both with comparable results. The latter one actually is a modification of the Benkeser reaction, which in its original forms tends to reduce naphthalene all the way to octahydro- and decahydronaphthalene.

This reduction of naphthalene to isotetralin (1,4,5,8-tetrahydronaphthalene) produces some tetralin (1,2,3,4-tetrahydronaphthalene) as byproduct, as is the case with the regular Birch reduction.

See also

References

  1. 1 2 3 Birch, A. J. (1944). "Reduction by dissolving metals. Part I". J. Chem. Soc.: 430. doi:10.1039/JR9440000430.
  2. 1 2 Birch, A. J. (1945). "Reduction by dissolving metals. Part II". J. Chem. Soc.: 809. doi:10.1039/jr9450000809.
  3. 1 2 Birch, A. J. (1946). "Reduction by dissolving metals. Part III". J. Chem. Soc.: 593. doi:10.1039/jr9460000593.
  4. Birch, A. J. (1947). "Reduction by dissolving metals. Part IV". J. Chem. Soc.: 102. doi:10.1039/jr9470000102.
  5. Birch, Arthur J. (1947). "Reduction by dissolving metals. Part V". J. Chem. Soc.: 1642. doi:10.1039/jr9470001642.
  6. Birch, A. J.; Mukherji, S. M. (1949). "Reduction by dissolving metals. Part VI. Some applications in synthesis". J. Chem. Soc.: 2531. doi:10.1039/jr9490002531.
  7. Wooster, C. B.; Godfrey, K. L. (1937). "Mechanism of the Reduction of Unsaturated Compounds with Alkali Metals and Water". Journal of the American Chemical Society. 59 (3): 596. doi:10.1021/ja01282a504.
  8. Wilds, A. L.; Nelson, N. A. (1953). "A Superior Method for Reducing Phenol Ethers to Dihydro Derivatives and Unsaturated Ketones". J. Am. Chem. Soc. 75 (21): 5360–5365. doi:10.1021/ja01117a064.
  9. Vogel, E.; Klug, W.; Breuer, A. (1974). "1,6-Methano[10]annulene". Org. Synth.; Coll. Vol., 6
  10. Birch, A. J.; Smith, H. (1958). "Reduction by metal–amine solutions: applications in synthesis and determination of structure". Quart. Rev. (review). 12 (1): 17. doi:10.1039/qr9581200017.
  11. Caine, D. (1976). "Reduction and Related Reactions of α,β-Unsaturated Carbonyl Compounds with Metals in Liquid Ammonia". Org. React. (review). 23: 1–258. ISBN 0471264180. doi:10.1002/0471264180.or023.01.
  12. Rabideau, P. W.; Marcinow, Z. (1992). "The Birch Reduction of Aromatic Compounds". Org. React. (review). 42: 1–334. ISBN 0471264180. doi:10.1002/0471264180.or042.01.
  13. Mander, L. N. (1991). "Partial Reduction of Aromatic Rings by Dissolving Metals and by Other Methods". Comp. Org. Syn. (review). 8: 489–521. ISBN 978-0-08-052349-1. doi:10.1016/B978-0-08-052349-1.00237-7.
  14. March, Jerry (1985), Advanced Organic Chemistry: Reactions, Mechanisms, and Structure (3rd ed.), New York: Wiley, ISBN 0-471-85472-7
  15. 1 2 Krapcho, A. P.; Bothner-By, A. A. (1959). "Kinetics of the Metal-Ammonia-Alcohol Reductions of Benzene and Substituted Benzenes1". J. Am. Chem. Soc. 81 (14): 3658–3666. doi:10.1021/ja01523a042.
  16. 1 2 3 Zimmerman, H. E. (1961). "Orientation in Metal Ammonia Reductions". Tetrahedron. 16: 169–176. doi:10.1016/0040-4020(61)80067-7.
  17. "Base-Catalyzed Rearrangements," Chapter 6 of "Molecular Rearrangements," Zimmerman, H. E., Ed. P. DeMayo, Interscience, 345–406, New York, 1963.
  18. Birch, A. J.; Nasipuri, D. (1959). "Reaction mechanisms in reduction by metal-ammonia solutions". Tetrahedron. 6 (2): 148–153. doi:10.1016/0040-4020(59)85008-0.
  19. 1 2 Burnham, D. R. (1969). "Orientation in the mechanism of the Birch reduction of anisole". Tetrahedron. 25 (4): 897–904. doi:10.1016/0040-4020(69)85023-4.
  20. Birch, A. J.; Subba Rao, G. (1972). Adv. Org. Chem. 8: 1–65. Missing or empty |title= (help) (and refs therein)
  21. 1 2 Birch, A. J.; Hinde, A. L.; Radom, L. (1980). "A theoretical approach to the Birch reduction. Structures and stabilities of the radical anions of substituted benzenes". J. Amer. Chem. Soc. 102 (10): 3370–3376. doi:10.1021/ja00530a012.
  22. 1 2 Birch, A. J.; Radom, L. (1980). "A theoretical approach to the Birch reduction. Structures and stabilities of cyclohexadienyl radicals". J. Amer. Chem. Soc. 102 (12): 4074–4080. doi:10.1021/ja00532a016.
  23. 1 2 Zimmerman, H. E.; Wang, P. A. (1990). "The Regioselectivity of the Birch Reduction". J. Am. Chem. Soc. 112 (3): 1280–1281. doi:10.1021/ja00159a078.
  24. 1 2 Zimmerman, H. E.; Wang, P. A. (1993). "Regioselectivity of the Birch Reduction". J. Am. Chem. Soc. 115 (6): 2205–2216. doi:10.1021/ja00059a015.
  25. Birch, A. J. (1992). "Steroid hormones and the Luftwaffe. A venture into fundamental strategic research and some of its consequences: The Birch reduction becomes a birth reduction". Steroids. 57 (8): 363–377. PMID 1519267. doi:10.1016/0039-128X(92)90080-S. (showed mechanism with meta)
  26. Birch, A. J. (1996). "The Birch reduction in organic synthesis". Pure & Appl. Chem. 68 (3): 553–556. doi:10.1351/pac199668030553. (still suggests meta)
  27. "Advanced Organic Chemistry: Reactions and synthesis", Francis A. Carey, Richard J. Sundberg, p. 437
  28. Bachi, J. W.; Epstein, Y.; Herzberg-Minzly, H.; Loewnenthal, J. E. (1969). "Synthesis of compounds related to gibberellic acid. III. Analogs of ring a of the gibberellins". J. Org. Chem. 34: 126–135. doi:10.1021/jo00838a030.
  29. Taber, D. F.; Gunn, B.P; Ching Chiu, I (1983). "Alkylation of the Anion from Birch Reduction of o-Anisic Acid: 2-Heptyl-2-Cyclohexenone". Org. Synth. 61: 59.; Coll. Vol., 7, p. 249
  30. Guo, Z.; Schultz, A. G. (2001). "Organic synthesis methodology. Preparation and diastereoselective birch reduction-alkylation of 3-substituted 2-methyl-2,3-dihydroisoindol-1-ones". J. Org. Chem. 66 (6): 2154–2157. PMID 11300915. doi:10.1021/jo005693g.
  31. 1 2 3 Zimmerman, Howard E (1975). Quantum Mechanics for Organic Chemists. New York: Academic Press. pp. 154–5. ISBN 0-12-781650-X.
  32. 1 2 3 Zimmerman, H. E. in "Molecular Rearrangements", De Mayo, P. Ed., Interscience, New York, 1963, pp. 350–352
  33. Paufler, R. M. (1960) Ph.D. Thesis, Northwestern University, Evanston, IL.
  34. Kuehne, M. E.; Lambert, B. F. (1963). "1,4-Dihydrobenzoic acid". Org. Synth.; Coll. Vol., 5, p. 400
  35. Paquette, L. A.; Barrett, J. H. (1969). "2,7-Dimethyloxepin". Org. Synth.; Coll. Vol., 5, p. 467
  36. Taber, D. F.; Gunn, B. P.; Ching Chiu, I. (1983). "Alkylation of the anion from Birch reduction of o-Anisic acid: 2-Heptyl-2-cyclohexenone". Org. Synth.; Coll. Vol., 7, p. 249
  37. Clive, Derrick L. J. & Sunasee, Rajesh (2007). "Formation of Benzo-Fused Carbocycles by Formal Radical Cyclization onto an Aromatic Ring". Organic Letters. 9 (14): 2677–2680. PMID 17559217. doi:10.1021/ol070849l.
  38. Ecsery, Zoltan & Muller, Miklos (1961). "Reduction vitamin D2 with alkaly metals". Magyar kémiai folyóirat. 67: 330–332.
  39. Donohoe, Timothy J. & House, David (2002). "Ammonia Free Partial Reduction of Aromatic Compounds Using Lithium Di-tert-butylbiphenyl (LiDBB)". Journal of Organic Chemistry. 67 (14): 5015–5018. PMID 12098328. doi:10.1021/jo0257593.
  40. Garst, Michael E.; Lloyd J.; Shervin; N. Andrew; Natalie C.; Alfred A.; et al. (2000). "Reductions with Lithium in Low Molecular Weight Amines and Ethylenediamine". Journal of Organic Chemistry. 65 (21): 7098–7104. PMID 11031034. doi:10.1021/jo0008136.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.