Canadian Military Engineers

Canadian Military Engineers

The cap badge of the Canadian Military Engineers
Country Canada
Branch Personnel branch of the Canadian Forces
Type military engineer
Role Primary: To permit friendly forces to live, move and fight on the field of battle and to deny the same to the enemy.
Secondary: To fight as infantry when required.
Garrison/HQ Home station Gagetown, New Brunswick
Motto(s) Latin: Ubique ("Everywhere")
March "Wings"
Anniversaries 4 December St. Barbara's Day
Commanders
Colonel-in-chief HM The Queen

The Canadian Military Engineers (CME) is the military engineer branch of the Canadian Armed Forces. Members of the branch who wear army uniform comprise the Corps of Royal Canadian Engineers (RCE; French: Corps du génie royal canadien).

The mission of the Canadian Military Engineers is to contribute to the survival, mobility, and combat effectiveness of the Canadian Armed Forces. Their roles are to conduct combat operations, support the Canadian Forces in war and peace, support national development, provide assistance to civil authorities, and support international aid programs. Military engineers’ responsibilities encompass the use of demolitions and land mines, the design, construction and maintenance of defensive works and fortifications, urban operations (hostile room entry), breaching obstacles, establishing/maintaining lines of communication, and bridging. They also provide water, power and other utilities, provide fire, aircraft crash and rescue services, hazardous material operations, and develop maps and other engineering intelligence. In addition, military engineers are experts in deception and concealment, as well as in the design and development of equipment necessary to carry out these operations. The official role of the combat engineer is to allow friendly troops to live, move and fight on the battlefield and deny that to the enemy.

History

Creation

Following the Boer War the Canadian Government realized that the defence of Canada required more than just a single infantry battalion and a few artillery batteries as part of the permanent defence force. In 1903 The Royal Canadian Engineers were founded as the basis of the permanent military engineers, while the militia had the Royal Canadian Engineers created under the leadership of a former Royal Military College of Canada officer cadet, Lieutenant-Colonel Paul Weatherbe.[1]

First World War

Canadian engineers building a bridge across the Canal du Nord, France, in 1918

One of the first tasks completed by the engineers after the declaration of war upon Germany in 1914 was for the rapid development of the Valcartier training site in Quebec. At its peak size 30,000 men were stationed here before the 1st Canadian Division was deployed to England.

When the 1st Division arrived on the front in Belgium they were accompanied by field companies of the Canadian Engineers (men recruited into the service after the start of the war were part of the Militia branch and not the regulars). These troops were responsible for construction of defences, sanitation systems, water supplies, bridging, and assisting with trench raids. Canadian Engineers also served in the Middle East fighting the Turks.

One of the most important functions of the Sappers in the war was to dig tunnels for mines underneath enemy trenches, with which to plant explosives to destroy them. At the Battle of Vimy Ridge, and particularly at the Battle of Messines, several such mines were used to win the battle. The Canadian Military Engineers contributed three tunnelling companies to the British Expeditionary Force: 1st Canadian Tunnelling Company, 2nd Canadian Tunnelling Company and 3rd Canadian Tunnelling Company. One was formed from men on the battlefield, while two other companies first trained in Canada and were then shipped to France.

In the war the only Victoria Cross the Canadian Engineers ever received was earned by Captain C. N. Mitchell for actions on 8 October 1918 at Canal de I'Escaut, north-east of Cambrai.

In total, more than 40,000 Canadians served as Engineers in the war, with 14,000 on the front on the last day of the war.

Grave in Cathays Cemetery, Cardiff of Sapper CE Avery, who died in a week after the Armistice in November 1918

Between the wars

On demobilization, the permanent force of Engineers was changed to 38 officers and 249 other ranks. As a matter of honour, King George V, the Canadian monarch bestowed on the organization the right to use the prefix royal before its name in 1932. On 29 April 1936, the Militia and Permanent components were joined to form the Corps of Royal Canadian Engineers. On this date the Militia adopted the cap badge used by the regulars.

Second World War

The formation patch worn by Royal Canadian Engineers attached to the First Canadian Army in World War II.

The Corps of Royal Canadian Engineers expanded dramatically in size to support Canada's war effort. On August 31, 1939, the Permanent Force engineers included 50 officers (with 14 seconded to other branches of the Canadian Army) and 323 other ranks; the maximum size of the Corps was reached in 1944, when it included 210 officers and 6283 other ranks.[2]

In keeping with British Army practice, company-sized units in the two armoured divisions were called "squadrons" following cavalry terminology. The following units were deployed in Canada and in Europe:

The senior officers of the Corps in World War II were as follows:[2]

Unification and the Cold War

On 1 February 1968, the Canadian Army, Royal Canadian Navy, and Royal Canadian Air Force were officially unified as the Canadian Armed Forces. As such the Royal Canadian Engineers, Royal Canadian Navy Civil Engineers and Royal Canadian Air Force Construction Division were amalgamated. However, the new branch went under the name Royal Canadian Engineers until 1973 when the branch was officially named as the Canadian Military Engineers.

The present day structure of army field units was set on 17 June 1977 with the creation of 1 Combat Engineer Regiment (1 CER), 2 CER, 4 CER and 5 CER.[4] The new regiments were each created from one of the squadrons of the former 1 Field Engineer Regiment.

21st century

Bailey bridge at Royal Military College of Canada built in 2004 by members of the 2nd Field Engineer Regiment of Toronto to commemorate the 100th Anniversary of the Canadian Military Engineers

The role of the Canadian Military Engineers has been expanding. The regular force component has been expanding the size of their units, due to the current missions of the Canadian Armed Forces.

In April 1997, Canada's Primary Reserve reorganized into ten brigade groups and in November 1997, the first reserve combat engineer regiment was created by converting an armoured reconnaissance regiment. A number of years later the three field engineer regiments, and seven independent field engineer squadrons were reorganized into combat engineer regiments. Three Canadian brigade groups had more than one engineer unit, and one (38 Canadian Brigade Group) did not have any units at all. Now the field engineer regiments have been redesignated or amalgamated to become combat engineer regiments, and the field engineer squadrons have either been amalgamated to make new combat engineer regiments or reroled as generic engineer squadrons.[5]

38 CBG previously had 21st Field Engineer Squadron, based in Flin Flon, Manitoba. It was however disbanded in 1995. In 2003, the Fort Garry Horse in Winnipeg, Manitoba, began hosting what became 31 Engineer Squadron in 2012. The brigade formed 46 Engineer Squadron in Saskatoon in 2012, which was a subunit of the North Saskatchewan Regiment until it gained full strength. Both squadrons are now subunits of 38 Combat Engineer Regiment.[6]

The deployment in Afghanistan required considerable use of engineers for road clearance, explosive ordnance disposal, heavy equipment, and combat support. By the end of the deployment 16 members of the RCE were killed in Afghanistan.

In April 2013, the title Corps of Royal Canadian Engineers was brought back for the army element of the branch.

Customs and traditions

Colonel-in-chief

Her Majesty Queen Elizabeth II, Queen of Canada is the colonel-in-chief of the Canadian Military Engineers. King George V, Edward VIII (albeit briefly), and George VI have all served as previous colonels-in-chief of the Royal Canadian Engineers.

Mottos

King George V granted the RCE the same mottoes as the Royal Engineers.

Ubique (Latin, "Everywhere") serves as a substitution for the battle honours the corps would have obtained if they were a line regiment.

Quo fas et gloria ducunt (Latin, "Whither right and glory lead")

Cap badge

From shortly after their creation until 1967, the Royal Canadian Engineers had a nearly identical cap badge to the Royal Engineers. This consisted of the Cipher of the Reigning monarch, surrounded by the Garter, surmounted by the crown with the words Royal Canadian Engineers on the scroll at the bottom, and surrounded by maple leaves instead of laurels.

The cap badge came to its current form after unification. Since the Royal Canadian Engineer cap badge was representative only of the army, a new one was developed, which is almost identical to that worn by the (Army's)non-permanent Canadian Engineers prior to the Great War (which was not bilingual and did not use enamel). In bilingual format, the words Engineers and Genie appear on the current cap badge indicating the bilingual nature of the CME. The word Ubique also appears, a motto which has been inherited by Engineers and Artillery in the Canadian military from their British forebears.

Chimo

The CME/RCE greeting or toast is "chimo" (/ˈtʃiːmoʊ/ CHEE-moh). This expression is also often used as a closing on correspondence between engineers. The word chimo is derived from the Inuktitut greeting: saimo (saimu) that means "hello," "goodbye," "peace be with you," and similar sentiments. This salutation was used in the Ungava region of northern Quebec and shares the same derivation as Fort Chimo (today Kuujjuaq) on Ungava Bay in northern Quebec. The current spelling and pronunciation is based on a Caucasian adaptation of the native language. On April 1, 1946, the Canadian Army assumed responsibility for the portions of the Alaska Highway that lay with Canadian boundaries. This section of the highway was renamed the "Northwest Highway System" and the responsibility for maintenance was given to the Royal Canadian Engineers for the next 20 years. The soldiers of the CME/RCE adopted the greeting of "chimo" and in 1973 it became the cheer of the CME.[7]

CME Flag

The present CME flag was created at the time of unification. It measures six "units" long by three "units" high, and is in the colours of brick red and royal blue.

Engineer Prayer

The Engineer Prayer was created for 2 Field Engineer Regiment by Major Hugh Macdonald, the unit's padre. It goes as follows:

Almighty God, we pray thee to bless the Canadian Military Engineers. May our bridges always stand, and our charges never fail, our members be ever loyal, and our officers worthy of their loyalty. May we work diligently in all our purposes and be skilled in our trades; steadfast for Queen and Country everywhere. Amen.[7]

Patron saint

The Canadian Military Engineers have no patron saint but Engineers often take part in artillery celebrations honouring St. Barbara, the patron saint of the artillery. Engineers, along with the artillery and miners, celebrate her feast day on December 4. St. Barbara is the patroness of artillerymen, fireworks manufacturers, firemen, stonemasons, against sudden death, against fires, and against storms (especially lightning storms).

Equipment

The CME/RCE has a number of equipment for use in supporting the Canadian Forces at home and on deployment overseas.

For more refer to Engineering and support vehicles of the Canadian Forces.

Training

Canadian Forces School of Military Engineering

The Canadian Forces School of Military Engineering (CFSME) at CFB Gagetown in Oromocto, New Brunswick is responsible for the conduct of 85 different courses that span all ranks and occupations within the Field, Construction and Airfield Engineer organizations. CFSME is the Canadian Forces Centre of Excellence in Engineer Training and home of the Engineers. [8]

Units

Regular Force units

Reserve Force units

Armoury of 34 Combat Engineer Regiment (Westmount, Quebec)

Order of precedence

Preceded by
Royal Canadian Artillery		 Canadian Military Engineers Succeeded by
Communications and Electronics Branch

See also

References

  1. ↑ Canadian Military Life After South Africa
  2. 1 2 Kerry, A. J. and McDill, W. A., The History of the Corps of Royal Canadian Engineers, vol. II (1936–1946), The Military Engineers Association of Canada, Ottawa, 1966.
  3. ↑ Unit codes were used to identify bridges and roads without disclosing the unit's actual name.
  4. ↑ Canadian Forces Publication A-AD-267-000/AF-003 Official Lineages of the Canadian Forces Volume 3, Part 1: Armour, Artillery and Field Engineer Regiments
  5. ↑ http://www.cmea-agmc.ca/Communiques/07.02.Restructure_e.pdf
  6. ↑ "38 Combat Engineer Regiment". Canadian Army. Canadian Army. Retrieved 4 May 2017.
  7. 1 2 "Customs and Traditions of the Canadian Military Engineers". National Defence. Archived from the original on 2005-09-09. Retrieved 2010-04-05.
  8. ↑ http://www.rockymountainrangers.ca/?p=eductraining
Wikimedia Commons has media related to Canadian Military Engineers.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.