Isotopes of copernicium

Copernicium (₁₁₂Cn) is a synthetic element, and thus a standard atomic weight cannot be given. Like all synthetic elements, it has no stable isotopes. The first isotope to be synthesized was ²⁷⁷Cn in 1996. There are 6 known radioisotopes (one more being unconfirmed) and one possible isomer. The longest-lived isotope is ²⁸⁵Cn with a half-life of 29 seconds.

List of isotopes

1. ↑ Abbreviations:
   SF: Spontaneous fission
2. ↑ Not directly synthesized, created as decay product of ²⁸⁵Fl
3. ↑ This isomer is unconfirmed
4. ↑ Not directly synthesized, created as decay product of ²⁸⁸Fl
5. ↑ Not directly synthesized, created as decay product of ²⁸⁹Fl
6. ↑ Not directly synthesized, created as decay product of ²⁹⁴Lv
7. ↑ This isotope is unconfirmed

Notes

• Values marked # are not purely derived from experimental data, but at least partly from systematic trends. Spins with weak assignment arguments are enclosed in parentheses.
• Uncertainties are given in concise form in parentheses after the corresponding last digits. Uncertainty values denote one standard deviation, except isotopic composition and standard atomic mass from IUPAC, which use expanded uncertainties.

Isotopes and nuclear properties

Nucleosynthesis

Super-heavy elements such as copernicium are produced by bombarding lighter elements in particle accelerators that induces fusion reactions. Whereas most of the isotopes of copernicium can be synthesized directly this way, some heavier ones have only been observed as decay products of elements with higher atomic numbers.^[4]

Depending on the energies involved, the former are separated into "hot" and "cold". In hot fusion reactions, very light, high-energy projectiles are accelerated toward very heavy targets such as actinides, giving rise to compound nuclei at high excitation energy (~40–50 MeV) that may either fission or evaporate several (3 to 5) neutrons.^[4] In cold fusion reactions, the produced fused nuclei have a relatively low excitation energy (~10–20 MeV), which decreases the probability that these products will undergo fission reactions. As the fused nuclei cool to the ground state, they require emission of only one or two neutrons, and thus, allows for the generation of more neutron-rich products.^[5] The latter is a distinct concept from that of where nuclear fusion claimed to be achieved at room temperature conditions (see cold fusion).^[6]

Cold fusion

The first cold fusion reaction to produce copernicium was performed by GSI in 1996, who reported the detection of two decay chains of copernicium-277.^[7]

208
82Pb
+ 70
30Zn
→ 277
112Cn
+
n

In a review of the data in 2000, the first decay chain was retracted. In a repeat of the reaction in 2000 they were able to synthesize a further atom. They attempted to measure the 1n excitation function in 2002 but suffered from a failure of the zinc-70 beam. The unofficial discovery of copernicium-277 was confirmed in 2004 at RIKEN, where researchers detected a further two atoms of the isotope and were able to confirm the decay data for the entire chain.^[8]

After the successful synthesis of copernicium-277, the GSI team performed a reaction using a ⁶⁸Zn projectile in 1997 in an effort to study the effect of isospin (neutron richness) on the chemical yield.

208
82Pb
+ 68
30Zn
→ 276−x
112Cn
+ x
n

The experiment was initiated after the discovery of a yield enhancement during the synthesis of darmstadtium isotopes using nickel-62 and nickel-64 ions. No decay chains of copernicium-275 were detected leading to a cross section limit of 1.2 picobarns (pb). However, the revision of the yield for the zinc-70 reaction to 0.5 pb does not rule out a similar yield for this reaction.

In 1990, after some early indications for the formation of isotopes of copernicium in the irradiation of a tungsten target with multi-GeV protons, a collaboration between GSI and the Hebrew University studied the foregoing reaction.

184
74W
+ 88
38Sr
→ 272−x
112Cn
+ x
n

They were able to detect some spontaneous fission (SF) activity and a 12.5 MeV alpha decay, both of which they tentatively assigned to the radiative capture product copernicium-272 or the 1n evaporation residue copernicium-271. Both the TWG and JWP have concluded that a lot more research is required to confirm these conclusions.^[4]

Hot fusion

In 1998, the team at the Flerov Laboratory of Nuclear Research (FLNR) in Dubna, Russia began a research program using calcium-48 nuclei in "warm" fusion reactions leading to super-heavy elements. In March 1998, they claimed to have synthesized two atoms of the element in the following reaction.

238
92U
+ 48
20Ca
→ 286−x
112Cn
+ x
n
(x=3,4)

The product, copernicium-283, had a claimed half-life of 5 minutes, decaying by spontaneous fission.^[9]

The long half-life of the product initiated first chemical experiments on the gas phase atomic chemistry of copernicium. In 2000, Yuri Yukashev in Dubna repeated the experiment but was unable to observe any spontaneous fission events with half-life of 5 minutes. The experiment was repeated in 2001 and an accumulation of eight fragments resulting from spontaneous fission were found in the low-temperature section, indicating that copernicium had radon-like properties. However, there is now some serious doubt about the origin of these results. To confirm the synthesis, the reaction was successfully repeated by the same team in January 2003, confirming the decay mode and half-life. They were also able to calculate an estimate of the mass of the spontaneous fission activity to ~285, lending support to the assignment.^[10]

The team at Lawrence Berkeley National Laboratory (LBNL) in Berkeley, United States entered the debate and performed the reaction in 2002. They were unable to detect any spontaneous fission and calculated a cross section limit of 1.6 pb for the detection of a single event.^[11]

The reaction was repeated in 2003–2004 by the team at Dubna using a slightly different set-up, the Dubna Gas-Filled Recoil Separator (DGFRS). This time, copernicium-283 was found to decay by emission of a 9.53 MeV alpha-particle with a half-life of 4 seconds. Copernicium-282 was also observed in the 4n channel (emitting 4 neutrons).^[12]

In 2003, the team at GSI entered the debate and performed a search for the five-minute SF activity in chemical experiments. Like the Dubna team, they were able to detect seven SF fragments in the low temperature section. However, these SF events were uncorrelated, suggesting they were not from actual direct SF of copernicium nuclei and raised doubts about the original indications for radon-like properties.^[13] After the announcement from Dubna of different decay properties for copernicium-283, the GSI team repeated the experiment in September 2004. They were unable to detect any SF events and calculated a cross section limit of ~1.6 pb for the detection of one event, not in contradiction with the reported 2.5 pb yield by Dubna team.

In May 2005, the GSI performed a physical experiment and identified a single atom of ²⁸³Cn decaying by SF with a short half-time suggesting a previously unknown SF branch.^[14] However, initial work by Dubna team had detected several direct SF events but had assumed that the parent alpha decay had been missed. These results indicated that this was not the case.

The new decay data on copernicium-283 were confirmed in 2006 by a joint PSI–FLNR experiment aimed at probing the chemical properties of copernicium. Two atoms of copernicium-283 were observed in the decay of the parent flerovium-287 nuclei. The experiment indicated that contrary to previous experiments, copernicium behaves as a typical member of group 12, demonstrating properties of a volatile metal.^[15]

Finally, the team at GSI successfully repeated their physical experiment in January 2007, and detected three atoms of copernicium-283, confirming both the alpha and SF decay modes.^[16]

As such, the 5 minutes SF activity is still unconfirmed and unidentified. It is possible that it refers to an isomer, namely copernicium-283b, whose yield is dependent upon the exact production methods.

233
92U
+ 48
20Ca
→ 281−x
112Cn
+ x
n

The team at FLNR studied this reaction in 2004. They were unable to detect any atoms of copernicium and calculated a cross section limit of 0.6 pb. The team concluded that this indicated that the neutron mass number for the compound nucleus had an effect on the yield of evaporation residues.^[12]

Decay products

Copernicium has been observed as decay products of flerovium. Flerovium currently has seven known isotopes, all but one (the lightest, ²⁸⁴Fl) of which have been shown to undergo alpha decays to become copernicium nuclei, with mass numbers between 281 and 286. Copernicium isotopes with mass numbers 281, 284, 285, and 286 to date have only been produced by flerovium nuclei decay. Parent flerovium nuclei can be themselves decay products of livermorium or oganesson. To date, no other elements have been known to decay to copernicium.^[22]

For example, in May 2006, the Dubna team (JINR) identified copernicium-282 as a final product in the decay of oganesson via the alpha decay sequence. It was found that the final nucleus undergoes spontaneous fission.^[18]

294
118Og
→ 290
116Lv
+ 4
2He

290
116Lv
→ 286
114Fl
+ 4
2He

286
114Fl
→ 282
112Cn
+ 4
2He

In the claimed synthesis of oganesson-293 in 1999, copernicium-281 was identified as decaying by emission of a 10.68 MeV alpha particle with half-life 0.90 ms.^[23] The claim was retracted in 2001. This isotope was finally created in 2010 and its decay properties contradicted the previous data.^[17]

Nuclear isomerism

First experiments on the synthesis of ²⁸³Cn produced a SF activity with half-life ~5 min.^[22] This activity was also observed from the alpha decay of flerovium-287. The decay mode and half-life were also confirmed in a repetition of the first experiment. Later, copernicium-283 was observed to undergo 9.52 MeV alpha decay and SF with a half-life of 3.9 s. It has also been found that alpha decay of copernicium-283 leads to different excited states of darmstadtium-279.^[12] These results suggest the assignment of the two activities to two different isomeric levels in copernicium-283, creating copernicium-283a and copernicium-283b.

Copernicium-285 has only been observed as a decay product of flerovium-289 and livermorium-293; during the first recorded synthesis of flerovium, one flerovium-289 was created, which alpha decayed to copernicium-285, which itself emitted an alpha particle in 29 seconds, releasing 9.15 or 9.03 MeV.^[12] However, in the first experiment to successfully synthesize livermorium, when livermorium-293 was created, it was shown that the created nuclide alpha decayed to flerovium-289, decay data for which differed from the known values significantly. Although unconfirmed, it is highly possible that this is associated with an isomer. The resulting nuclide decayed to copernicium-285, which emitted an alpha particle with a half-life of around 10 minutes, releasing 8.586 MeV. Similar to its parent, it is believed to be a nuclear isomer, copernicium-285b.^[24] Due to the low beam energies associated with the initial ²⁴⁴Pu+⁴⁸Ca experiment, it is possible that the 2n channel may have been reached, producing ²⁹⁰Fl instead of ²⁸⁹Fl; this would then undergo undetected electron capture to ²⁹⁰Nh, thus resulting in a reassignment of this activity to its alpha daughter ²⁸⁶Rg.^[25]

Chemical yields of isotopes

Cold fusion

The table below provides cross-sections and excitation energies for cold fusion reactions producing copernicium isotopes directly. Data in bold represent maxima derived from excitation function measurements. + represents an observed exit channel.

Hot fusion

The table below provides cross-sections and excitation energies for hot fusion reactions producing copernicium isotopes directly. Data in bold represents maxima derived from excitation function measurements. + represents an observed exit channel.

Fission of compound nuclei with Z=112

Several experiments have been performed between 2001 and 2004 at the Flerov Laboratory of Nuclear Reactions in Dubna studying the fission characteristics of the compound nucleus ²⁸⁶Cn. The nuclear reaction used is ²³⁸U+⁴⁸Ca. The results have revealed how nuclei such as this fission predominantly by expelling closed shell nuclei such as ¹³²Sn (Z=50, N=82). It was also found that the yield for the fusion-fission pathway was similar between ⁴⁸Ca and ⁵⁸Fe projectiles, indicating a possible future use of ⁵⁸Fe projectiles in superheavy element formation.^[26]

Theoretical calculations

Evaporation residue cross sections

The below table contains various targets-projectile combinations for which calculations have provided estimates for cross section yields from various neutron evaporation channels. The channel with the highest expected yield is given.

DNS = Di-nuclear system; σ = cross section

References

1. ↑ Chart of Nuclides. Brookhaven National Laboratory
2. ↑ V. K. Utyonkov (March 31 – April 2, 2015). "Synthesis of superheavy nuclei at limits of stability: ^239,240Pu + ⁴⁸Ca and ^249-251Cf + ⁴⁸Ca reactions" (PDF). Super Heavy Nuclei International Symposium, Texas A & M University, College Station TX, USA. 
3. 1 2 3 Kaji, Daiya; Morita, Kosuke; Morimoto, Kouji; Haba, Hiromitsu; Asai, Masato; Fujita, Kunihiro; Gan, Zaiguo; Geissel, Hans; Hasebe, Hiroo; Hofmann, Sigurd; Huang, MingHui; Komori, Yukiko; Ma, Long; Maurer, Joachim; Murakami, Masashi; Takeyama, Mirei; Tokanai, Fuyuki; Tanaka, Taiki; Wakabayashi, Yasuo; Yamaguchi, Takayuki; Yamaki, Sayaka; Yoshida, Atsushi (2017). "Study of the Reaction ⁴⁸Ca + ²⁴⁸Cm → ²⁹⁶Lv* at RIKEN-GARIS". Journal of the Physical Society of Japan. 86: 034201–1–7. doi:10.7566/JPSJ.86.034201. 
4. 1 2 3 Barber, R. C.; et al. (2009). "Discovery of the element with atomic number 112" (PDF). Pure and Applied Chemistry. 81 (7): 1331. doi:10.1351/PAC-REP-08-03-05. 
5. ↑ Armbruster, P.; Munzenberg, G. (1989). "Creating superheavy elements". Scientific American. 34: 1331–1339. OSTI 6481060. 
6. ↑ Fleischmann, M.; Pons, S. (1989). "Electrochemically induced nuclear fusion of deuterium". Journal of Electroanalytical Chemistry and Interfacial Electrochemistry. 261 (2): 301–308. doi:10.1016/0022-0728(89)80006-3. 
7. ↑ S. Hofmann; et al. (1996). "The new element 112". Zeitschrift für Physik A. 354 (1): 229–230. doi:10.1007/BF02769517. 
8. ↑ Morita, K. (2004). "Decay of an Isotope ²⁷⁷112 produced by ²⁰⁸Pb + ⁷⁰Zn reaction". In Penionzhkevich, Yu. E.; Cherepanov, E. A. Exotic Nuclei: Proceedings of the International Symposium. World Scientific. pp. 188–191. doi:10.1142/9789812701749_0027. 
9. ↑ Oganessian, Yu. Ts.; et al. (1999). "Search for new isotopes of element 112 by irradiation of ²³⁸U with ⁴⁸Ca". European Physical Journal A. 5 (1): 63–68. Bibcode:1999EPJA....5...63O. doi:10.1007/s100500050257. 
10. ↑ Oganessian, Yu. Ts.; et al. (2004). "Second Experiment at VASSILISSA separator on the synthesis of the element 112". European Physical Journal A. 19 (1): 3–6. Bibcode:2004EPJA...19....3O. doi:10.1140/epja/i2003-10113-4. 
11. ↑ Loveland, W.; et al. (2002). "Search for the production of element 112 in the ⁴⁸Ca+²³⁸U reaction". Physical Review C. 66 (4): 044617. Bibcode:2002PhRvC..66d4617L. arXiv:nucl-ex/0206018 . doi:10.1103/PhysRevC.66.044617. 
12. 1 2 3 4 Oganessian, Yu. Ts.; Utyonkov, V.; Lobanov, Yu.; Abdullin, F.; Polyakov, A.; Shirokovsky, I.; Tsyganov, Yu.; Gulbekian, G.; Bogomolov, S.; Gikal, B. N.; et al. (2004). "Measurements of cross sections and decay properties of the isotopes of elements 112, 114, and 116 produced in the fusion reactions ^233,238U, ²⁴²Pu, and ²⁴⁸Cm+⁴⁸Ca". Physical Review C. 70 (6): 064609. Bibcode:2004PhRvC..70f4609O. doi:10.1103/PhysRevC.70.064609. 
13. ↑ Soverna, S. (2003). "Indication for a gaseous element 112" (PDF). Gesellschaft für Schwerionenforschung. 
14. ↑ Hofmann, S.; et al. (2005). "Search for Element 112 Using the Hot Fusion Reaction ⁴⁸Ca + ²³⁸U" (PDF). Gesellschaft für Schwerionenforschung: 191. 
15. ↑ Eichler, R; Aksenov, NV; Belozerov, AV; Bozhikov, GA; Chepigin, VI; Dmitriev, SN; Dressler, R; Gäggeler, HW; Gorshkov, VA (2007). "Chemical Characterization of Element 112". Nature. 447 (7140): 72–75. Bibcode:2007Natur.447...72E. PMID 17476264. doi:10.1038/nature05761. 
16. ↑ Hofmann, S.; et al. (2007). "The reaction ⁴⁸Ca + ²³⁸U -> ²⁸⁶112* studied at the GSI-SHIP". European Physical Journal A. 32 (3): 251–260. Bibcode:2007EPJA...32..251H. doi:10.1007/BF01415134. 
17. 1 2 Public Affairs Department (26 October 2010). "Six New Isotopes of the Superheavy Elements Discovered: Moving Closer to Understanding the Island of Stability". Berkeley Lab. Retrieved 2011-04-25. 
18. 1 2 Oganessian, Yu. Ts.; Utyonkov, V. K.; Lobanov, Yu. V.; Abdullin, F. Sh.; Polyakov, A. N.; Sagaidak, R. N.; Shirokovsky, I. V.; Tsyganov, Yu. S.; et al. (2006-10-09). "Synthesis of the isotopes of elements 118 and 116 in the ²⁴⁹Cf and ²⁴⁵Cm+⁴⁸Ca fusion reactions". Physical Review C. 74 (4): 044602. Bibcode:2006PhRvC..74d4602O. doi:10.1103/PhysRevC.74.044602. Retrieved 2008-01-18. 
19. ↑ Oganessian, Yu. Ts.; Yeremin, A. V.; Popeko, A. G.; Bogomolov, S. L.; Buklanov, G. V.; Chelnokov, M. L.; Chepigin, V. I.; Gikal, B. N.; Gorshkov, V. A.; Gulbekian, G. G.; et al. (1999). "Synthesis of nuclei of the superheavy element 114 in reactions induced by ⁴⁸Ca". Nature. 400 (6741): 242–245. Bibcode:1999Natur.400..242O. doi:10.1038/22281. 
20. ↑ Oganessian, Y. T.; Utyonkov, V.; Lobanov, Y.; Abdullin, F.; Polyakov, A.; Shirokovsky, I.; Tsyganov, Y.; Gulbekian, G.; Bogomolov, S.; Gikal, B.; et al. (2000). "Synthesis of superheavy nuclei in the ⁴⁸Ca+²⁴⁴Pu reaction: ²⁸⁸Fl". Physical Review C. 62 (4): 041604. Bibcode:2000PhRvC..62d1604O. doi:10.1103/PhysRevC.62.041604. 
21. ↑ Oganessian, Yu. Ts.; et al. (2004). "Measurements of cross sections for the fusion-evaporation reactions ²⁴⁴Pu(⁴⁸Ca,xn)^292−x114 and ²⁴⁵Cm(⁴⁸Ca,xn)^293−x116". Physical Review C. 69 (5): 054607. Bibcode:2004PhRvC..69e4607O. doi:10.1103/PhysRevC.69.054607. 
22. 1 2 Holden, N. E. (2004). "Table of the Isotopes". In D. R. Lide. CRC Handbook of Chemistry and Physics (85th ed.). CRC Press. Section 11. ISBN 978-0-8493-0485-9. 
23. ↑ Ninov, V.; et al. (1999). "Observation of Superheavy Nuclei Produced in the Reaction of 86
    Kr
    with 208
    Pb
    ". Physical Review Letters. 83 (6): 1104–1107. Bibcode:1999PhRvL..83.1104N. doi:10.1103/PhysRevLett.83.1104. 
24. ↑ Patin, J. B.; et al. (2003). Confirmed results of the ²⁴⁸Cm(⁴⁸Ca,4n)²⁹²116 experiment (PDF) (Report). Lawrence Livermore National Laboratory. p. 7. Retrieved 2008-03-03. 
25. ↑ Hofmann, S.; Heinz, S.; Mann, R.; Maurer, J.; Münzenberg, G.; Antalic, S.; Barth, W.; Burkhard, H. G.; Dahl, L.; Eberhardt, K.; Grzywacz, R.; Hamilton, J. H.; Henderson, R. A.; Kenneally, J. M.; Kindler, B.; Kojouharov, I.; Lang, R.; Lommel, B.; Miernik, K.; Miller, D.; Moody, K. J.; Morita, K.; Nishio, K.; Popeko, A. G.; Roberto, J. B.; Runke, J.; Rykaczewski, K. P.; Saro, S.; Scheidenberger, C.; Schött, H. J.; Shaughnessy, D. A.; Stoyer, M. A.; Thörle-Popiesch, P.; Tinschert, K.; Trautmann, N.; Uusitalo, J.; Yeremin, A. V. (2016). "Review of even element super-heavy nuclei and search for element 120". The European Physics Journal A. 2016 (52). doi:10.1140/epja/i2016-16180-4. 
26. ↑ see Flerov lab annual reports 2001–2004
27. 1 2 Feng, Zhao-Qing (2007). "Formation of superheavy nuclei in cold fusion reactions". Physical Review C. 76: 044606. Bibcode:2007PhRvC..76d4606F. arXiv:0707.2588 . doi:10.1103/PhysRevC.76.044606. 
28. 1 2 3 4 "Influence of entrance channels on formation of superheavy nuclei in massive fusion reactions". arXiv:0904.2994 . 

• Isotope masses from:
  • M. Wang; G. Audi; A. H. Wapstra; F. G. Kondev; M. MacCormick; X. Xu; et al. (2012). "The AME2012 atomic mass evaluation (II). Tables, graphs and references." (PDF). Chinese Physics C. 36 (12): 1603–2014. Bibcode:2012ChPhC..36....3M. doi:10.1088/1674-1137/36/12/003. 
  • G. Audi; A. H. Wapstra; C. Thibault; J. Blachot; O. Bersillon (2003). "The NUBASE evaluation of nuclear and decay properties" (PDF). Nuclear Physics A. 729: 3–128. Bibcode:2003NuPhA.729....3A. doi:10.1016/j.nuclphysa.2003.11.001. Archived from the original (PDF) on 2008-09-23. 
• Isotopic compositions and standard atomic masses from:
  • J. R. de Laeter; J. K. Böhlke; P. De Bièvre; H. Hidaka; H. S. Peiser; K. J. R. Rosman; P. D. P. Taylor (2003). "Atomic weights of the elements. Review 2000 (IUPAC Technical Report)". Pure and Applied Chemistry. 75 (6): 683–800. doi:10.1351/pac200375060683. 
  • M. E. Wieser (2006). "Atomic weights of the elements 2005 (IUPAC Technical Report)". Pure and Applied Chemistry. 78 (11): 2051–2066. doi:10.1351/pac200678112051. Lay summary. 
• Half-life, spin, and isomer data selected from the following sources. See editing notes on this article's talk page.
  • G. Audi; A. H. Wapstra; C. Thibault; J. Blachot; O. Bersillon (2003). "The NUBASE evaluation of nuclear and decay properties" (PDF). Nuclear Physics A. 729: 3–128. Bibcode:2003NuPhA.729....3A. doi:10.1016/j.nuclphysa.2003.11.001. Archived from the original (PDF) on 2008-09-23. 
  • National Nuclear Data Center. "NuDat 2.1 database". Brookhaven National Laboratory. Retrieved September 2005.  Check date values in: |access-date= (help)
  • N. E. Holden (2004). "Table of the Isotopes". In D. R. Lide. CRC Handbook of Chemistry and Physics (85th ed.). CRC Press. Section 11. ISBN 978-0-8493-0485-9. 
  • GSI (2011). "Superheavy Element Research at GSI" (PDF). GSI. Retrieved July 2012.  Check date values in: |access-date= (help)