Chrysler 3.3 & 3.8 engine

Chrysler 3.3 & 3.8 engine
Overview
Manufacturer Chrysler Corporation (1990-1998)
DaimlerChrysler AG (1998–2007)
Chrysler LLC (2007–2009)
Chrysler Group LLC (2009-2011)
Production 1990-2011
Combustion chamber
Configuration 60° V6
Cylinder block alloy Cast iron
Cylinder head alloy Aluminum
Valvetrain Overhead valve
Combustion
Fuel system Sequential Multiple-Port Fuel Injection
Fuel type
Oil system Wet sump
Cooling system Water-cooled
Chronology
Predecessor
Successor Chrysler Pentastar engine

This engine was Chrysler's first 60° V6 engine designed and built in-house for front wheel drive vehicles, and their first V6 not based on a V8. It was designed as a larger, more powerful option to the Mitsubishi 3.0 V6 in the minivans and debuted in 1990.

The engine has been produced in two major variants differing by their piston displacement: a 3.3 l (201 cu in) and a 3.8 l (232 cu in). The 3.3 was dropped after 2010 with the Chrysler minivans, and the 3.8 was dropped after 2011 with the Jeep Wrangler, ending 21 years in production.

Specifications

Displacement Bore Stroke Years Power Torque
3.3 L (3301 cc/201.5 CID)93 mm (3.66 in)81 mm (3.19 in)1990–1993150 hp (112 kW)180 lb·ft (244 N·m)
1994–1995162 hp (121 kW)194 lb·ft (263 N·m)
1996–2000158 hp (118 kW)203 lb·ft (275 N·m)
2001–2010180 hp (134 kW)210 lb·ft (285 N·m)
3.8 L (3778 cc/230.6 CID)96 mm (3.78 in)87 mm (3.43 in)1991–1993150 hp (112 kW)213 lb·ft (289 N·m)
1994–1995162 hp (121 kW)213 lb·ft (289 N·m)
1996–1997166 hp (124 kW)227 lb·ft (308 N·m)
1998–2000180 hp (134 kW)240 lb·ft (325 N·m)
2001–2007215 hp (160 kW)245 lb·ft (332 N·m)
2008–2011197 hp (147 kW)230 lb·ft (312 N·m)[1]

History

The original 3.3 engine, as well as the larger 3.8, are pushrod engine designs. The 3.3 was introduced in 1990 with the Chrysler Imperial, New Yorker, and related K-series models, and was joined in 1991 by the 3.8. Production on the 3.3 was stopped in 2010 after a run of 5,076,603[2] engines, while the 3.8 remained in production until May 2011 in Trenton, Michigan for the Jeep Wrangler. Both use a cast iron block and aluminum heads.

3.3

The first of the family, the 3.3 liter engine's actual piston displacement is 3,301 cc (201 cu in) with a 93 mm (3.7 in) bore and 81 mm (3.2 in) stroke. In 1994, the 3.3 received a 12 hp (8.9 kW) increase in power to 162 hp (121 kW) due to a new air intake. In 2001, the engine was fitted with a variable intake control system which boosted output to 180 hp (130 kW) at 5000 rpm and 210 lb·ft (285 N·m) at 4000 rpm. The engine was especially suited for transverse applications in Chrysler's minivans, but was also used in a longitudinal front-wheel-drive setup on 1993-1997 LH platform cars. It was last used in 2010 for Chrysler minivans before the introduction of the new 3.6 L Pentastar engine for the 2011 model year.

Designated EGA, the 3.3 was built at Trenton Engine in Trenton, Michigan. It uses SFI fuel injection, has roller tappets and features forged steel connecting rods, a one-piece cast camshaft, and either a cast aluminum or reinforced plastic intake manifold. The 3.3 has a timing chain, and is an interference engine meaning that the valves will collide with the pistons in the event of a timing chain failure. Unlike the 3.5 on which the water pump is driven by the timing belt, on the 3.3, the accessory belt drives the water pump.

Vehicles using the 3.3 include:

3.8

The 3.8 litre EGH engine in a 1993 Chrysler Imperial

The 3.3 was bored to 3.78 in (96 mm) and stroked to 3.43 in (87 mm) to create a 3,778 cc (231 cu in) version.[1] This EGH version was also built at Trenton Engine in Trenton, MI.

The 3.8 received an increase in power of 12 hp (9 kW), for a total of 162 hp (121 kW) in 1994 via a new intake system. In 1998 the compression ratio increased for a total of 180 hp (134 kW) and 240 lb·ft (325 N·m). In 2001, like the 3.3 the 3.8 received a variable intake control system which boosted output to 215 hp (160 kW) at 5000 rpm with 245 lb·ft (332 N·m) at 4000 rpm.

Vehicles using the 3.8 include:

SOHC

A single overhead camshaft was an addition to the lineup for 1993. Introduced with the 3.5 L engine, this design spawned the DOHC 2.7 L Chrysler LH engine, as well as the 3.2 L and 4.0 L variants.

References

Wikimedia Commons has media related to Chrysler pushrod V6 engine.

See also

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.