Bethpage (LIRR station)

Bethpage

A westbound train arrives at the Bethpage station in September 2014.
Coordinates 40°44′35″N 73°29′00″W / 40.742994°N 73.483359°W / 40.742994; -73.483359Coordinates: 40°44′35″N 73°29′00″W / 40.742994°N 73.483359°W / 40.742994; -73.483359
Owned by Long Island Rail Road
Line(s)
Platforms 2 side platforms
Tracks 2
Construction
Parking Yes; Free, and Town of Oyster Bay permits
Bicycle facilities Yes
Disabled access Yes
Other information
Fare zone 7
History
Opened 1856
Rebuilt 1959
Electrified 1987
750 V (DC) third rail
Previous names Jerusalem Station (18541936)
Jerusalem (18631936)
Central Park (18671936)
Traffic
Passengers (2006) 4,963[1]
Services
Preceding station   LIRR   Following station
Main Line
(Ronkonkoma Branch)
toward Greenport
Montauk Branch
(Central Branch)
(non-stop)
toward Montauk
Current and former locations
Grumman station Ronkonkoma Branch Farmingdale station
Current and former locations
Grumman station Central Branch South Farmingdale station

Bethpage Station is a station along the Main Line of the Long Island Rail Road. It is located at Stewart Avenue and Jackson Avenue, in Bethpage, New York, and serves Ronkonkoma Branch trains. Trains that travel along the Central Branch also use these tracks, but none stop here.

History

Long Island Rail Road (LIRR) tracks were completed on the present line in 1841.[2] At first trains did not stop here, Bethpage appearing only as a notation ("late Bethpage") associated with the Farmingdale station to the east.[3] By 1854, the LIRR stopped at a local station called Jerusalem Station.[4] A local post office opened January 29, 1857, with the name Jerusalem Station.[5] LIRR schedules also referred to the station as simply Jerusalem.[6] In 1867, the residents voted to change the name of the local post office to Central Park, and both that and Jerusalem appeared on LIRR schedules until 1936. The station and the post office were renamed Bethpage on October 1, 1936. In 1959, the station burned down and was replaced. Service was electrified in 1987.[7]

Two nearby stations also had Bethpage in their name:

From 1873 until 1876, the Central Railroad of Long Island had a regularly scheduled stop also named Central Park near Stewart Avenue and Motor Lane in Plainedge, approximately 0.75 miles south of the present station.[8][9][10] Service was continued by the LIRR at that location until about 1924.

Station layout

There are 2 tracks at this station with two 12-car high-level side platforms.

Ground/platform level
Exit/entrance
Platform A, doors will open on the right
Track 1 Ronkonkoma Branch toward Jamaica, Atlantic or Penn Station (Hicksville)
Montauk Branch does not stop here
Track 2 Ronkonkoma Branch toward Farmingdale or Ronkonkoma (Farmingdale)
Montauk Branch does not stop here →
Platform B, doors will open on the right

References

  1. Average weekday, 2006 LIRR Origin and Destination Study
  2. "Early LIRR History".
  3. "1841 Brooklyn Eagle : LIRR timetable". Brooklyn Eagle. 1841-10-26. Retrieved 2012-04-17.
  4. "Railroads". The New York Times. April 13, 1854. p. 7. Retrieved 2008-04-07.
  5. David Roberts. "Nassau County Post Offices 1794-1879". Retrieved 2007-12-23. John L. Kay; Chester M. Smith, Jr. (1982). New York Postal History: The Post Offices & First Postmasters from 1775 to 1980. American Philatelic Society.
  6. "1863 LIRR timetable". Retrieved 2011-12-31. The schedule shows the stop is 2 miles from Farmingdale and 3 miles from Hicksville, the same distances as of 2017.
  7. Schmitt, Eric (December 31, 1987). "Electric Service Extended by L.I.R.R.". The New York Times. Section B, p. 3. Retrieved 2011-07-23.
  8. "The Central RR of Long Island".
  9. "c1884 map of LI showing rail lines".
  10. "The Stewart Line" (1874 & 1875 timetables show separate stations for Bethpage (now Old Bethpage), Bethpage Junction, and Central Park/Jerusalem).

Works related to Bethpage (LIRR station) at Wikisource

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.