Cisco Catalyst

Catalyst is the brand for a variety of network switches sold by Cisco Systems. While commonly associated with Ethernet switches, a number of different network interfaces have been available throughout the history of the brand. Cisco acquired several different companies and rebranded their products as different versions of the Catalyst product line. The original Catalyst 5000 and 6000 series were based on technology acquired from Crescendo Communications. The 1700, 1900, and 2800 series Catalysts came from Grand Junction Networks, and the Catalyst 3000 series came from Kalpana in 1994.[1]

Operating systems

In most cases, the technology for the Catalyst Switch was developed separately from Cisco′s router technology. The Catalyst switches originally ran software called CatOS rather than the more widely known Cisco IOS software used by routers. However, this has changed as the product lines have merged closer together. In some cases, particularly in the modular chassis switches, a configuration called 'Hybrid' has emerged - this is where the layer 2 functions are configured using CatOS, and the layer 3 elements are configured using IOS. Native IOS can also be found with newer software versions that have eliminated CatOS entirely in favor of IOS, even on hardware that originally required CatOS.[2]

Some newer Catalyst switch models (with recent versions of the Cisco IOS) also allow web-based management using a graphical interface (GUI) module which is hosted on a HTTP server located on the switch. The Catalyst 3750-series of switches is an example of a Cisco Catalyst switch that allows this style of GUI via HTTP.

CatOS

CatOS (Catalyst Operating System) is the discontinued operating system for many of the Catalyst brand of legacy network switches. CatOS ran on switches such as 1200, 2948G, 4000, 4500, 5000, 5500, 6000, 6500 series. It was originally called XDI[3] by the switching company Crescendo Communications, Inc. Cisco renamed it to CatOS when they acquired Crescendo in late 1993.

CatOS can still run on some of Cisco's modular switches, "hybrid" mode. In hybrid mode, the NMP (switch processor) runs CatOS and the route processor runs Cisco IOS.

Interfaces

As Catalyst devices are primarily Ethernet switches, all modern Catalyst models have Ethernet interfaces, ranging from 10 Mbit/s to 10 Gbit/s depending on the model. Some models can accommodate Asynchronous Transfer Mode interfaces which can be used to bridge Ethernet traffic across wide area networks. Other models can support T1, E1, and ISDN PRI interfaces to provide connections to the PSTN. Legacy models supported a variety of interfaces, such as token ring, FDDI, and 100BaseVG, but are no longer sold by Cisco Systems.

Most models have basic layer 2 functions and are capable of switching Ethernet frames between ports. Commonly found additional features are VLANs (Cisco proprietary ISL or IEEE 802.1Q), trunking and QoS or CoS. The switches, whether IOS or CatOS, are fully manageable.

Many Catalysts that run IOS are also capable of functioning as a router, making them layer 3 devices; when coupled with TCP and UDP filtering, these switches are capable of layer 2-4 operation. Depending on the exact software image, a Catalyst that runs IOS may be able to tackle large-scale enterprise routing tasks, using router technologies like OSPF or BGP.

Most chassis-based Catalyst models have the concept of field-replaceable "supervisor" cards. These work by separating the line cards, chassis, and processing engine (mirroring most Cisco router designs). The chassis provides power and a high-speed backplane, the line cards provide interfaces to the network, and the processing engine moves packets, participates in routing protocols, etc. This gives several advantages:

Additionally, most high-end switches off-load processing away from the supervisors, allowing line cards to switch traffic directly between ports on the same card without using any processing power or even touching the backplane. Naturally, this can't be done for all traffic, but basic layer-2 switching can usually be handled exclusively by the line card, and in many cases also more complex operations can be handled as well.

Management

Cisco switches are very popular for a number of reasons, including advanced customization and manageability. The switches can be configured using a serial console or a telnet session (or ssh if the correct OS is loaded along with the ssh keys generated). SNMP allows monitoring of many states, and measurement of traffic flows. Many devices can also run an HTTP server, but this is often disabled because of the security problems it creates - either because it's not encrypted, or because of the relatively frequent security vulnerabilities in the Cisco http daemon itself. Some Cisco switches focused on smaller organizations forego a command line interface and offer ONLY a browser-based GUI for configuration and management.

Configuration of the switch is done in plain text and is thus easy to audit - no special tools are required to generate a useful configuration. For sites with more than a few devices it is useful to set up a TFTP server for storing the configuration files and any IOS images for updating. Complex configurations are best created using a text editor (using a site standard template), putting the file on the TFTP server and copying it to the Cisco device. However, it can be noted that a TFTP server can present its own security problems.

Stackwise

Cisco StackWise is a technology offered by Cisco Systems that allows for up to nine Catalyst switch 3750 series switches to operate as though they were one switch. This allows for greater resiliency, and performance.

With a dual redundant loop back plane connection at either 32 Gbit/s or 64 Gbit/s depending on the 3750 model.

One switch from the stack will act as the master switch. The master switch will maintain the stack and allow you to configure and monitor the whole stack as though one via a single console.

If one switch fails the remaining switches will continue to operate by looping back any information that would normally traverse the failed switch, effectively bypassing it. If the master switch fails, the next switch in the stack will automatically take over as master. This feature means greater redundancy, as one switch's failure will not bring about a failure of the entire stack.

As each switch contains the entire configuration for the stack, one of the benefits of this technology is the ability to replace a faulty switch (any—including master) with a new un-programmed switch. The stack will configure the new switch on-the-fly to accommodate minimal downtime and reduce manual input configuration errors.

StackWise effectively replaced the GigaStack found on lower-price models such as Catalyst 35xx and 29xx series.

Recently, there is a new variation of the technology, known as Cisco Stackwise Plus, offering 64 Gbit/s nonblocking switching fabric speed.

Master Selection

The master switch of a stack is determined in the following order:[4]

  1. User specified.
  2. The switch with the most advanced IOS, i.e. Advanced IP Services IPv6 (AIPv6), then Enhanced Multilayer Software Image (EMI) and then Standard Multilayer Software Image (SMI).
  3. Programmed switch. A configured switch will preside over a switch with just the defaults.
  4. Uptime. The switch that has been running the longest.
  5. MAC address. The switch with the lowest MAC address.

Models

There are two general types of Catalyst switches: fixed configuration models that are usually one or two rack units in size, with 12 to 80 ports; and modular switches in which virtually every component, from the CPU card to power supplies to switch cards, are individually installed in a chassis.

In general, switch names start with WS-C, followed by the model line (2960). A letter at the end of this number signifies a special feature, followed by the number of ports (usually 24 or 48) and additional nomenclature indicating other features.

Fixed configuration switches

As of 2011, the most popular fixed configuration switches are the WS-C2960, WS-C3560 and WS-C3750 series at the high end, an entry level managed "express" series - with models beginning WS-CE (configurable by web interface only, no command line interface), the "ME" metroline series of switches, and a new "Small Business" series coming from Cisco's acquisition of Linksys. In addition, there are many legacy switches suitable for most business and service provider needs no longer offered directly through Cisco (WS-C2950, WS-C3550 for example).

Cisco Catalyst 2960 Series

Layer 2 switch.

Cisco Catalyst 3560

Layer 2 and layer 3 switch.

Cisco Catalyst 3750

Layer 2 and layer 3 switch.

Modular switches

Cisco modular switches are much larger and are entirely configurable, beginning with a chassis, power supplies, the choice of supervisory engines (CPU mainboards), and switch modules. Among Cisco's modular series are:

End-of-Life Switches

Current Switches

Base Model Form Factor Variants Available ports/Modules Number of power supplies Number/Type of supervisors Expansion type Sync End-of-life (only major notices listed) Comments
Catalyst 2900[17] Fixed 2918
2926
2948
2980[18]
24 8P8C
48 8P8C
None None None Announced 2007 (all except 2918),[19]
Announced 2015 (2918 only)
Catalyst 2960[20] Fixed 2960
2960S[21]
2960CX[22]
2960-X
2960-XR[23]
8 8P8C/2 SFP
24 8P8C/2 SFP
48 8P8C/4 SFP
1 (fixed) (*note: cannot stack power, only backplane) None None Stack (up to four 2960-S, up to 8 2960-X or 2960XR) Announced 2013 (2960 only)[24] PoE only available on models with 'P' designator, 2960C is compact version
Catalyst 3560[25] Fixed 3560
3560V2
3560E[26]
3560C[27]
8 8P8C/2 SFP or 8P8C
12 8P8C/2 SFP or 8P8C
8 SFP
12 SFP
24 8P8C/2 SFP
48 8P8C/4 SFP
12 'X2'[28]
12 SFP/2 'X2'
1 (up to 2 on 3560E only) None None (10 Gbit/s options on 3560E only)[29] Stack (V2 and E only) Announced 2012 (all except 3560C)[30] PoE optional, 3560C is compact version
Catalyst 3650[31] Fixed 3650[32] 24 8P8C/4 SFP
48 8P8C/4 SFP
24 8P8C/2 SFP+
48 8P8C/2 SFP+
None None 3650 is 3850 without stacking capability No EoL notices announced to date PoE optional
Catalyst 3750[33] Fixed 3750
3750V2
3750G[34]
12 SFP
24 8P8C/2 SFP
48 8P8C/4 SFP
1 (up to 2 on 3750V2) None None All are stack capable Announced 2010 (3750),[35]

Announced 2013 (3750V2)[36]

PoE optional
Catalyst 3750X[37] Fixed 3750X 12 SFP
24 8P8C/2 SFP
48 8P8C/4 SFP
2 None Uplink module with 1- and 10-Gbit/s options[38] All are stack capable Announced 2015[39] PoE optional
Catalyst 3850[40] Fixed 3850 12 SFP
24 8P8C
48 8P8C
12 SFP+
16 SFP+
24 SFP+
32 SFP+
48 SFP+[41]
Up to 2, most capable of stacking power None 1 Gbit/s, 10 Gbit/s and 40 Gbit/s options on all models[42] All are stack capable No EoL notices announced to date PoE optional
Catalyst 4500[43] Chassis 4503
4503-E
4506
4506-E
4507R
4507R+E
4507R-E
4510R
4510R+E
4510R-E[44]
24 SFP module
48 SFP module
48 8P8C module
up to 2 4503:1, 4506:1, all else:up to 2[45]
Sup II+, Sup III, Sup IV, Sup V (EoSale), Sup 6-E Sup 7-E, Sup 8-E[46]
Line cards VSS (with Sup7) Announced 2010 (non-E line cards),[47]
Announced 2010 (non-E chassis),[48]
Announced 2012 (Supervisor V),[49]
Announced 2014 (Supervisor 6-E, Supervisor 6L-E)[50]
PoE optional (per module)
Catalyst 4500-X[51] Fixed 4500-X 16 SFP+
32 SFP+[52]
up to 2 None 8 SFP+ module None No EoL notices to date Can select front to back or back to front air flow options
Catalyst 4900M[53] Fixed 4900M 48 8P8C/4 SFP
48 8P8C/2 'X2'
28 SFP/2 'X2'
up to 2 None Various 'X2' modules None No EoL notices to date
Catalyst 6500-E[54] Chassis 6503-E
6504-E
6506-E
6509-E/V-E
6513-E[55]
4 port, 8 port, 16 port, 24 port and 48 port modules in 10/100/1G/10G/40G speeds of various physical medium[56] up to 2 6503:1, all else:up to 2[57]
Sup 2T, Sup 720 VSS, Sup 720, Sup 32 (EoSale)[58]
Line cards, Firewall, Wireless, Network Analysis (NAM), VPN, Application control engine, ASA Services[59] VSS (with Sup 720-10G or Sup 2T)[60] Announced 2012 (Supervisor 32),[61]
Announced 2012 (6513 chassis (non-e))[62]
PoE optional (per module)
Catalyst 6800[63] Both (6840-X and 6800ia models are fixed) 6880-X
6840-X
6800-XL
6800-ia
No EoL notices to date Can support some 6500 modules (ASA, NAM, WiSM)[64]

Sources

References

  1. Kennedy Clark; Kevin Hamilton (Feb 1, 2002), Configuring the Catalyst, Cisco Press, retrieved 2016-08-29
  2. "Comparison of the Cisco Catalyst and Cisco IOS Operating Systems for the Cisco Catalyst 6500 Series Switch". Cisco Systems. August 19, 2004.
  3. Cisco Press: Configuring the Catalyst
  4. "Cisco StackWise and StackWise Plus Technology". Cisco Systems. Retrieved 28 May 2016.
  5. "Cisco Catalyst 2960 Series Switches: Compare Models", Cisco Systems. Accessed 4 March 2015.
  6. Cisco.com: "End-of-Sale and End-of-Life Products". Retrieved December 21, 2012.
  7. Cisco 2940 Product Line
  8. Cisco 2940 Model comparison
  9. Cisco 2940 EoL announcement
  10. Cisco 2950 product line
  11. Cisco 2950 Model Comparison
  12. Cisco 2950 EoL notices
  13. Cisco 2950 EoL announcement
  14. Cisco Gigastack product information
  15. Cisco 3550 EoL announcement
  16. Cisco Gigastack product information
  17. Cisco 2900 Product Line
  18. Cisco 2900 EoL notifications
  19. Cisco 2900 EoL notification
  20. Cisco 2960 Product Line
  21. Cisco 2960 Model Comparison
  22. Cisco 2960CX Model Comparison
  23. Cisco 2960 Migration Benefits
  24. Cisco 2960 EoL announcement
  25. Cisco 3560 Product Line
  26. Cisco 3560 Model Comparison
  27. Cisco 3560C Model Comparison
  28. Cisco X2 module information
  29. Cisco 3560E product information
  30. Cisco 3560 EoL announcement
  31. Cisco 3650 Product Line
  32. Cisco 3650 Model Comparison
  33. Cisco 3750 Product Line
  34. Cisco 3750 Model Comparison
  35. Cisco 3750 EoL Announcement
  36. Cisco 3750V2 EoL Announcement
  37. Cisco 3750X Product Line
  38. Cisco Catalyst 3750-X and 3560-X Series Switches Data Sheet
  39. Cisco 3750X EoL Announcement
  40. Cisco 3850 Product Line
  41. Cisco 3850 Model Comparison
  42. Cisco 3850 optional hardware
  43. Cisco 4500 Product Line
  44. Cisco 4500-E Model Comparison
  45. Cisco 4500-E Chassis specifications
  46. Cisco 4500 Supervisor list
  47. Cisco 4500 non-E line card EoL announcement
  48. Cisco 4500 Non-E EoL announcement
  49. Cisco 4500 Supervisor V EoL announcement
  50. Cisco 4500 Supervisor 6E EoL announcement
  51. Cisco 4500-X Product Line
  52. Cisco 4500-X Model Comparison
  53. Cisco 4900 Product Line
  54. Cisco 6500-E Product Line
  55. Cisco 6500-E Model Comparison
  56. Cisco 6500 Line Card comparison
  57. Cisco 6500 Model Comparison
  58. Cisco 6500 Supervisor Comparison
  59. Cisco 6500 Service module reference
  60. Cisco 6500 VSS configuration
  61. Cisco 6500 Supervisor 32 EoL notification
  62. Cisco 6513 non-E chassis EoL announcement
  63. Cisco 6800 Product Line
  64. Cisco 6807-XL product information
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.