Caledonian Railway 60 Class

Caledonian Railway 60 Class
(details for original CR batch)

Pickersgill/Hughes 4P 4-6-0 No. 14640 at Motherwell Locomotive Depot, 15 August 1948.
Type and origin
Power type Steam
Designer William Pickersgill
Builder St. Rollox Works
Order number Y115, Y116
Build date November 1916 – April 1917
Total produced 6
Specifications
Configuration:
  Whyte 4-6-0
  UIC 2′C h2
Gauge 4 ft 8 12 in (1,435 mm) standard gauge
Leading dia. 3 ft 6 in (1.067 m)
Driver dia. 6 ft 1 in (1.854 m)
Loco weight 75 long tons (76 t; 84 short tons)
Tender weight 46.5 long tons (47.2 t; 52.1 short tons)
Boiler pressure 175 lbf/in2 (1.21 MPa)
Heating surface 1,676 sq ft (155.7 m2)
Superheater:
  Type Robinson
  Heating area 258.3 sq ft (24.00 m2)
Cylinders Two, outside
Cylinder size 20 in × 26 in (508 mm × 660 mm)
Valve gear Stephenson
Valve type Piston valves
Performance figures
Tractive effort 21,795 lbf (96.95 kN)
Career
Operators
Class CR: 60
Power class LMS: 4P
Numbers
  • CR: 60–65
  • LMS: 14630–14655
Disposition All scrapped

The Caledonian Railway 60 Class were 4-6-0 passenger engines designed by William Pickersgill and introduced in 1916. Six were built by the Caledonian Railway at its own St Rollox works in 1916-17, and all of them passed into LMS ownership in 1923. A further twenty locomotives of a slightly modified design were built by the LMS under the auspices of George Hughes in the period 1925-1926.

The 60 Class were rugged and free steaming, but were unsophistocated and of lethargic performance for their size. Although classified as passenger locomotives by the LMS, latterly they spent much of their time on goods trains and acquired the nickname Greybacks, either in reference to their long and grimy boilers or possibly as an insult from former Glasgow and South Western Railway enginemen[1] ('greyback' being an old term for louse). Withdrawals began in 1944 but twenty three passed into British Railways ownership in 1948. The last locomotives were withdrawn from service in 1953, and all were scrapped.

Numbering and Locomotive Histories

sources Longworth (2005)[2] and RailUK[3][4]

Technical details

Pickersgill Caledonian Railway design

See box, top right.[5]

Hughes LMS development of Pickersgill design

The locomotives built by the LMS had slightly larger cylinders and weighed slightly less than the original CR locomotives. Details were as for the CR locomotives except:[6]

References

  1. Atkins, C. P. (1976), The Scottish 4-6-0 Classes, Ian Allan, p.53
  2. Longworth, Hugh (2005), British Railway Steam Locomotives 1948-1968, page 166
  3. "Rail UK Steam Loco Class Information". Railuk.info. Retrieved 2013-05-26.
  4. "Rail UK Steam Loco Class Information". Railuk.info. Retrieved 2013-05-26.
  5. "Rail UK Steam Loco Class Information". Railuk.info. Retrieved 2012-06-21.
  6. Atkins, C. P. (1976), The Scottish 4-6-0 Classes, Ian Allan, p.109
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.