Calcium sulfate

Calcium sulfate
Names
Other names
Identifiers
3D model (JSmol)
ChEBI
ChemSpider
ECHA InfoCard 100.029.000
E number E516 (acidity regulators, ...)
KEGG
RTECS number WS6920000
UNII
Properties
CaSO4
Molar mass 136.14 g/mol (anhydrous)
145.15 g/mol (hemihydrate)
172.172 g/mol (dihydrate)
Appearance white solid
Odor odorless
Density 2.96 g/cm3 (anhydrous)
2.32 g/cm3 (dihydrate)
Melting point 1,460 °C (2,660 °F; 1,730 K) (anhydrous)
0.21g/100ml at 20 °C (anhydrous)[1]
0.24 g/100ml at 20 °C (dihydrate)[2]
4.93 × 10−5 mol2L−2 (anhydrous)
3.14 × 10−5 (dihydrate)
[3]
Solubility in glycerol slightly soluble (dihydrate)
Acidity (pKa) 10.4 (anhydrous)
7.3 (dihydrate)
-49.7·10−6 cm3/mol
Structure
orthorhombic
Thermochemistry
107 J·mol−1·K−1 [4]
-1433 kJ/mol[4]
Hazards
Safety data sheet See: data page
ICSC 1589
NFPA 704
Flammability code 0: Will not burn. E.g., water Health code 1: Exposure would cause irritation but only minor residual injury. E.g., turpentine Reactivity code 0: Normally stable, even under fire exposure conditions, and is not reactive with water. E.g., liquid nitrogen Special hazards (white): no codeNFPA 704 four-colored diamond
0
1
0
Flash point Non-flammable
US health exposure limits (NIOSH):
PEL (Permissible)
 TWA 15 mg/m3 (total) TWA 5 mg/m3 (resp) [for anhydrous form only][5]
REL (Recommended)
 TWA 10 mg/m3 (total) TWA 5 mg/m3 (resp) [anhydrous only][5]
IDLH (Immediate danger)
 N.D.[5]
Related compounds
Other cations
 Magnesium sulfate
Strontium sulfate
Barium sulfate
Related desiccants
 Calcium chloride
Magnesium sulfate
Related compounds
 Plaster of Paris
Gypsum
Supplementary data page
Refractive index (n),
Dielectric constant (εr), etc.
Thermodynamic
data
 Phase behaviour
solid–liquid–gas
UV, IR, NMR, MS
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
N verify (what is YesYN ?)
Infobox references

Calcium sulfate (or calcium sulphate) is the inorganic compound with the formula CaSO4 and related hydrates. In the form of γ-anhydrite (the anhydrous form), it is used as a desiccant. One particular hydrate is better known as plaster of Paris, and another occurs naturally as the mineral gypsum. It has many uses in industry. All forms are white solids that are poorly soluble in water.[6] Calcium sulfate causes permanent hardness in water.

Hydration states and crystallographic structures

The compound exists in three levels of hydration corresponding to different crystallographic structures and to different minerals in the nature:

Uses

The main use of calcium sulfate is to produce plaster of Paris and stucco. These applications exploit the fact that calcium sulfate which has been powdered and calcined forms a moldable paste upon hydration and hardens as crystalline calcium sulfate dihydrate. It is also convenient that calcium sulfate is poorly soluble in water and does not readily dissolve in contact with water after its solidification.

Hydration and dehydration reactions

With judicious heating, gypsum converts to the partially dehydrated mineral called calcium sulfate hemihydrate, calcined gypsum, and plaster of Paris.This material has the formula CaSO4·(nH2O), where 0.5 ≤ n ≤ 0.8.[9] Temperatures between 100 °C and 150 °C (302 °F) are required to drive off the water within its structure. The details of the temperature and time depend on ambient humidity. Temperatures as high as 170 °C are used in industrial calcination, but at these temperatures γ-anhydrite begins to form. The heat energy delivered to the gypsum at this time (the heat of hydration) tends to go into driving off water (as water vapor) rather than increasing the temperature of the mineral, which rises slowly until the water is gone, then increases more rapidly. The equation for the partial dehydration is:

CaSO4 · 2 H2O   →   CaSO4 · 0.5 H2O + 1.5 H2O ↑

The endothermic property of this reaction is relevant to the performance of drywall, conferring fire resistance to residential and other structures. In a fire, the structure behind a sheet of drywall will remain relatively cool as water is lost from the gypsum, thus preventing (or substantially retarding) damage to the framing (through combustion of wood members or loss of strength of steel at high temperatures) and consequent structural collapse. But at higher temperatures, calcium sulfate will release oxygen and act as an oxidizing agent. This property is used in aluminothermy. In contrast to most minerals, which when rehydrated simply form liquid or semi-liquid pastes, or remain powdery, calcined gypsum has an unusual property: when mixed with water at normal (ambient) temperatures, it quickly reverts chemically to the preferred dihydrate form, while physically "setting" to form a rigid and relatively strong gypsum crystal lattice:

CaSO4 · 0.5 H2O + 1.5 H2O   →   CaSO4 · 2 H2O

This reaction is exothermic and is responsible for the ease with which gypsum can be cast into various shapes including sheets (for drywall), sticks (for blackboard chalk), and molds (to immobilize broken bones, or for metal casting). Mixed with polymers, it has been used as a bone repair cement. Small amounts of calcined gypsum are added to earth to create strong structures directly from cast earth, an alternative to adobe (which loses its strength when wet). The conditions of dehydration can be changed to adjust the porosity of the hemihydrate, resulting in the so-called alpha and beta hemihydrates (which are more or less chemically identical).

On heating to 180 °C, the nearly water-free form, called γ-anhydrite (CaSO4·nH2O where n = 0 to 0.05) is produced. γ-Anhydrite reacts slowly with water to return to the dihydrate state, a property exploited in some commercial desiccants. On heating above 250 °C, the completely anhydrous form called β-anhydrite or "natural" anhydrite is formed. Natural anhydrite does not react with water, even over geological timescales, unless very finely ground.

The variable composition of the hemihydrate and γ-anhydrite, and their easy inter-conversion, is due to their nearly identical crystal structures containing "channels" that can accommodate variable amounts of water, or other small molecules such as methanol.

Other uses

Drierite

The calcium sulfate hydrates are used as a coagulant in products such as tofu.[10]

Up to the 1970s, commercial quantities of sulfuric acid were produced in Whitehaven (Cumbria, UK) from anhydrous calcium sulfate. Upon being mixed with shale or marl, and roasted, the sulfate liberates sulfur trioxide gas, a precursor in sulfuric acid production, the reaction also produces calcium silicate, a mineral phase essential in cement clinker production.[11]

CaSO4 + SiO2 → CaSiO3 + SO3

When sold at the anhydrous state as a desiccant with a color-indicating agent under the name Drierite, it appears blue (anhydrous) or pink (hydrated) due to impregnation with cobalt(II) chloride, which functions as a moisture indicator.

Production and occurrence

The main sources of calcium sulfate are naturally occurring gypsum and anhydrite, which occur at many locations worldwide as evaporites. These may be extracted by open-cast quarrying or by deep mining. World production of natural gypsum is around 127 million tonnes per annum.[12]

In addition to natural sources, calcium sulfate is produced as a by-product in a number of processes:

These precipitation processes tend to concentrate radioactive elements in the calcium sulfate product. This issue is particular with the phosphate by-product, since phosphate ores naturally contain uranium and its decay products such as radium-226, lead-210 and polonium-210.

Calcium sulfate is also a common component of fouling deposits in industrial heat exchangers, because its solubility decreases with increasing temperature (see the specific section on the retrograde solubility).

Mars

2011 findings by the Opportunity rover on Mars show a form of calcium sulfate in a vein on the surface. Images suggest the mineral is gypsum.[13]

Retrograde solubility

The dissolution of the different crystalline phases of calcium sulfate in water is exothermic and release heat (decrease in Gibbs free energy: Δ G < 0). As an immediate consequence, to proceed, the dissolution reaction needs to evacuate this heat that can be considered as a product of reaction. If the system is cooled, the dissolution equilibrium will evolve towards the right according to the Le Chatelier principle and calcium sulfate will dissolve more easily. The solubility of calcium sulfate increases thus when the temperature decreases. If the temperature of the system is raised, the reaction heat cannot dissipate and the equilibrium will regress towards the left according to Le Chatelier principle. The solubility of calcium sulfate decreases thus when temperature increases. This contra-intuitive solubility behaviour is called retrograde solubility. It is less common than for most of the salts whose dissolution reaction is endothermic (i.e., the reaction consumes heat: increase in Gibbs free energy: Δ G > 0) and whose solubility increases with temperature. Another calcium compound, calcium hydroxide (Ca(OH)2, portlandite) also exhibits a retrograde solubility for the same thermodynamic reason: because its dissolution reaction is also exothermic and releases heat. So, to dissolve higher amounts of calcium sulfate or calcium hydroxide in water, it is necessary to cool down the solution close to its freezing point in place to increase its temperature or to use nearly boiling water.

Temperature dependence of the solubility of calcium sulfate (3 phases) in pure water.

The retrograde solubility of calcium sulfate is also responsible for its precipitation in the hottest zone of heating systems and for its contribution to the formation of scale in boilers along with the precipitation of calcium carbonate whose solubility also decreases when CO2 degasses from hot water or can escape out of the system.

See also

References

  1. ↑ S. Gangolli (1999). The Dictionary of Substances and Their Effects: C. Royal Society of Chemistry. p. 71. ISBN 0-85404-813-8.
  2. ↑ American Chemical Society (2006). Reagent chemicals: specifications and procedures : American Chemical Society specifications, official from January 1, 2006. Oxford University Press. p. 242. ISBN 0-8412-3945-2.
  3. ↑ D.R. Linde (ed.) "CRC Handbook of Chemistry and Physics", 83rd Edition, CRC Press, 2002
  4. 1 2 Zumdahl, Steven S. (2009). Chemical Principles 6th Ed. Houghton Mifflin Company. p. A21. ISBN 0-618-94690-X.
  5. 1 2 3 "NIOSH Pocket Guide to Chemical Hazards #0095". National Institute for Occupational Safety and Health (NIOSH).
  6. ↑ Franz Wirsching "Calcium Sulfate" in Ullmann's Encyclopedia of Industrial Chemistry, 2012 Wiley-VCH, Weinheim. doi:10.1002/14356007.a04_555
  7. ↑ Morikawa, H.; Minato, I.; Tomita, T.; Iwai, S. (1975). "Anhydrite: A refinement". Acta Crystallographica Section B Structural Crystallography and Crystal Chemistry. 31 (8): 2164. doi:10.1107/S0567740875007145.
  8. ↑ Cole, W.F.; Lancucki, C.J. (1974). "A refinement of the crystal structure of gypsum CaSO4·2H2O". Acta Crystallographica Section B Structural Crystallography and Crystal Chemistry. 30 (4): 921. doi:10.1107/S0567740874004055.
  9. 1 2 Taylor H.F.W. (1990) Cement Chemistry. Academic Press, ISBN 0-12-683900-X, pp. 186-187.
  10. ↑ About tofu coagulant. Retrieved 9 Jan. 2008.
  11. ↑ Whitehaven Coast Archeological Survey
  12. ↑ Gypsum, USGS, 2008
  13. ↑ "NASA Mars Opportunity rover finds mineral vein deposited by water". NASA Jet Propulsion Laboratory. December 7, 2011. Retrieved April 23, 2013.
Salts and esters of the sulfate ion
H2SO4 He
Li2SO4 BeSO4 B esters
ROSO3−
(RO)2SO2		 (NH4)2SO4
N2H6SO4
(NH3OH)2SO4		 O F Ne
Na2SO4
NaHSO4		 MgSO4 Al2(SO4)3
Al2SO4(OAc)4		 Si P SO42− Cl Ar
K2SO4
KHSO4		 CaSO4 Sc2(SO4)3 Ti(SO4)2
TiOSO4		 VSO4
V2(SO4)3
VOSO4		 CrSO4
Cr2(SO4)3		 MnSO4
Mn2(SO4)3		 FeSO4
Fe2(SO4)3		 CoSO4
Co2(SO4)3		 NiSO4 CuSO4
Cu2SO4		 ZnSO4 Ga2(SO4)3 Ge As Se Br Kr
RbHSO4
Rb2SO4		 SrSO4 Y2(SO4)3 Zr(SO4)2 Nb Mo Tc Ru Rh PdSO4 Ag2SO4 CdSO4 In2(SO4)3 SnSO4 Sb2(SO4)3 Te I Xe
Cs2SO4 BaSO4   Hf Ta W Re Os Ir Pt Au Hg2SO4
HgSO4		 Tl2SO4
Tl2(SO4)3		 PbSO4 Bi2(SO4)3 Po At Rn
Fr Ra   Rf Db Sg Bh Hs Mt Ds Rg Cn Nh Fl Mc Lv Ts Og
↓
La Ce2(SO4)3
Ce(SO4)2		 Pr2(SO4)3 Nd Pm Sm Eu Gd Tb Dy Ho Er Tm Yb2(SO4)3 Lu
Ac Th Pa U(SO4)2
UO2SO4		 Np Pu Am Cm Bk Cf Es Fm Md No Lr
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.