Byzantine fault tolerance

In fault-tolerant computer systems, and in particular distributed computing systems, Byzantine fault tolerance (BFT) is the characteristic of a system that tolerates the class of failures known as the Byzantine Generals' Problem,[1] which is a generalized version of the Two Generals' Problem – for which there is an unsolvability proof. The phrases interactive consistency or source congruency have been used to refer to Byzantine fault tolerance, particularly among the members of some early implementation teams.[2] It is also referred to as error avalanche, Byzantine agreement problem, Byzantine generals problem and Byzantine failure.

Byzantine failures are considered the most general and most difficult class of failures among the failure modes. The so-called fail-stop failure mode occupies the simplest end of the spectrum. Whereas fail-stop failure model simply means that the only way to fail is a node crash, detected by other nodes, Byzantine failures imply no restrictions, which means that the failed node can generate arbitrary data, pretending to be a correct one, which makes fault tolerance difficult.

Background

A Byzantine fault is any fault presenting different symptoms to different observers.[3] A Byzantine failure is the loss of a system service due to a Byzantine fault in systems that require consensus.[4]

The objective of Byzantine fault tolerance is to be able to defend against Byzantine failures, in which components of a system fail with symptoms that prevent some components of the system from reaching agreement among themselves, where such agreement is needed for the correct operation of the system. Correctly functioning components of a Byzantine fault tolerant system will be able to provide the system's service, assuming there are not too many faulty components.

The terms fault and failure are used here according to the standard definitions[5] originally created by a joint committee on "Fundamental Concepts and Terminology" formed by the IEEE Computer Society's Technical Committee on Dependable Computing and Fault-Tolerance and IFIP Working Group 10.4 on Dependable Computing and Fault Tolerance.[6] A version of these definitions is also described in the Dependability Wikipedia page.

Byzantine Generals' Problem

Byzantine refers to the Byzantine Generals' Problem, an agreement problem (described by Leslie Lamport, Robert Shostak and Marshall Pease in their 1982 paper, "The Byzantine Generals Problem")[1] in which a group of generals, each commanding a portion of the Byzantine army, encircle a city. These generals wish to formulate a plan for attacking the city. In its simplest form, the generals must only decide whether to attack or retreat. Some generals may prefer to attack, while others prefer to retreat. The important thing is that every general agrees on a common decision, for a halfhearted attack by a few generals would become a rout and be worse than a coordinated attack or a coordinated retreat.

The problem is complicated by the presence of traitorous generals who may not only cast a vote for a suboptimal strategy, they may do so selectively. For instance, if nine generals are voting, four of whom support attacking while four others are in favor of retreat, the ninth general may send a vote of retreat to those generals in favor of retreat, and a vote of attack to the rest. Those who received a retreat vote from the ninth general will retreat, while the rest will attack (which may not go well for the attackers). The problem is complicated further by the generals being physically separated and having to send their votes via messengers who may fail to deliver votes or may forge false votes.

Byzantine fault tolerance can be achieved if the loyal (non-faulty) generals have a unanimous agreement on their strategy. Note that there can be a default vote value given to missing messages. For example, missing messages can be given the value <Null>. Further, if the agreement is that the <Null> votes are in the majority, a pre-assigned default strategy can be used (e.g., retreat).

The typical mapping of this story onto computer systems is that the computers are the generals and their digital communication system links are the messengers.

Known examples of Byzantine failures

Several examples of Byzantine failures that have occurred are given in two equivalent journal papers.[3][4] These and other examples are described on the NASA DASHlink web pages.[7] These web pages also describe some phenomenology that can cause Byzantine faults.

Byzantine errors were observed infrequently and at irregular points during endurance testing for the then-newly constructed Virginia class submarines, at least through 2005 (when the issues were publicly reported).[8]

Early solutions

Several solutions were described by Lamport, Shostak, and Pease in 1982.[1] They began by noting that the Generals' Problem can be reduced to solving a "Commander and Lieutenants" problem where loyal Lieutenants must all act in unison and that their action must correspond to what the Commander ordered in the case that the Commander is loyal.

Several system architectures were designed c. 1980 that implemented Byzantine fault tolerance. These include: Draper's FTMP,[11] Honeywell's MMFCS,[12] and SRI's SIFT.[13]

Practical Byzantine fault tolerance

In 1999, Miguel Castro and Barbara Liskov introduced the "Practical Byzantine Fault Tolerance" (PBFT) algorithm,[14] which provides high-performance Byzantine state machine replication, processing thousands of requests per second with sub-millisecond increases in latency.

After PBFT, several BFT protocols were introduced to improve its robustness and performance. For instance, Q/U,[15] HQ,[16] Zyzzyva,[17] and ABsTRACTs[18] , etc., addressed the performance and cost issues; whereas, other protocols, like Aardvark[19] and RBFT[20] , addressed its robustness issues. Furthermore, Adapt[21] tried to make use of existing BFT protocols, through switching between them in an adaptive way, to improve system robustness and performance as the underlying conditions change. Furthermore, BFT protocols were introduced that leverage trusted components to reduce the number of replicas, e.g., A2M-PBFT-EA[22] and MinBFT.[23]

Software

UpRight[24] is an open source library for constructing services that tolerate both crashes ("up") and Byzantine behaviors ("right") that incorporates many of these protocols' innovations.

In addition to PBFT and UpRight, there is the BFT-SMaRt library,[25] a high-performance Byzantine fault-tolerant state machine replication library developed in Java. This library implements a protocol very similar to PBFT's, plus complementary protocols which offer state transfer and on-the-fly reconfiguration of hosts. BFT-SMaRt is the most recent effort to implement state machine replication, still being actively maintained.

Archistar[26] utilizes a slim BFT layer[27] for communication. It prototypes a secure multi-cloud storage system using Java licensed under LGPLv2. Focus lies on simplicity and readability, it aims to be the foundation for further research projects.

Askemos[28] is a concurrent, garbage-collected, persistent programming platform atop of replicated state machines which tolerates Byzantine faults. It prototypes an execution environment facilitating Smart contracts.

Tendermint[29] is general purpose software for BFT state machine replication. Using a socket protocol, it enables state machines to be written in any programming language, and provides means for the state machine to influence elements of the consensus, such as the list of active processes. Tendermint is implemented in the style of a blockchain, which amortizes the overhead of BFT and allows for faster recovery from failure.

In practice

One example of BFT in use is bitcoin, a peer-to-peer digital currency system. The bitcoin network works in parallel to generate a chain of Hashcash style proof-of-work. The proof-of-work chain is the key to overcome Byzantine failures and to reach a coherent global view of the system state.

Some aircraft systems, such as the Boeing 777 Aircraft Information Management System (via its ARINC 659 SAFEbus® network),[30] [31] the Boeing 777 flight control system,[32] and the Boeing 787 flight control systems, use Byzantine fault tolerance. Because these are real-time systems, their Byzantine fault tolerance solutions must have very low latency. For example, SAFEbus can achieve Byzantine fault tolerance with on the order of a microsecond of added latency.

Some spacecraft such as the SpaceX Dragon flight system[33] consider Byzantine fault tolerance in their design.

Byzantine fault tolerance mechanisms use components that repeat an incoming message (or just its signature) to other recipients of that incoming message. All these mechanisms make the assumption that the act of repeating a message blocks the propagation of Byzantine symptoms. For systems that have a high degree of safety or security criticality, these assumptions must be proven to be true to an acceptable level of fault coverage. When providing proof through testing, one difficulty is creating a sufficiently wide range of signals with Byzantine symptoms.[34] Such testing likely will require specialized fault injectors.[35][36]

See also

References

  1. 1 2 3 Lamport, L.; Shostak, R.; Pease, M. (1982). "The Byzantine Generals Problem" (PDF). ACM Transactions on Programming Languages and Systems. 4 (3): 382–401. doi:10.1145/357172.357176.
  2. ↑ Kirrmann, Hubert (n.d.). "Fault Tolerant Computing in Industrial Automation" (PDF). Switzerland: ABB Research Center. p. 94. Retrieved 2015-03-02.
  3. 1 2 3 Driscoll, K.; Hall, B.; Paulitsch, M.; Zumsteg, P.; Sivencrona, H. (2004). "The Real Byzantine Generals": 6.D.4–61–11. doi:10.1109/DASC.2004.1390734.
  4. 1 2 3 Driscoll, Kevin; Hall, Brendan; Sivencrona, Håkan; Zumsteg, Phil (2003). "Byzantine Fault Tolerance, from Theory to Reality". 2788: 235–248. ISSN 0302-9743. doi:10.1007/978-3-540-39878-3_19.
  5. ↑ Avizienis, A.; Laprie, J.-C.; Randell, Brian; Landwehr, C. (2004). "Basic concepts and taxonomy of dependable and secure computing". IEEE Transactions on Dependable and Secure Computing. 1 (1): 11–33. ISSN 1545-5971. doi:10.1109/TDSC.2004.2.
  6. ↑ "Dependable Computing and Fault Tolerance". Retrieved 2015-03-02.
  7. ↑ Driscoll, Kevin (2012-12-11). "Real System Failures". DASHlink. NASA. Retrieved 2015-03-02.
  8. ↑ Walter, C.; Ellis, P.; LaValley, B. (2005). "The Reliable Platform Service: A Property-Based Fault Tolerant Service Architecture": 34–43. doi:10.1109/HASE.2005.23.
  9. ↑ Feldman, P.; Micali, S. (1997). "An optimal probabilistic protocol for synchronous Byzantine agreement" (PDF). SIAM J. Computing. 26 (4): 873–933. doi:10.1137/s0097539790187084.
  10. ↑ Paulitsch, M.; Morris, J.; Hall, B.; Driscoll, K.; Latronico, E.; Koopman, P. (2005). "Coverage and the Use of Cyclic Redundancy Codes in Ultra-Dependable Systems": 346–355. doi:10.1109/DSN.2005.31.
  11. ↑ Hopkins, Albert L.; Lala, Jaynarayan H.; Smith, T. Basil (1987). "The Evolution of Fault Tolerant Computing at the Charles Stark Draper Laboratory, 1955–85". 1: 121–140. ISSN 0932-5581. doi:10.1007/978-3-7091-8871-2_6.
  12. ↑ Driscoll, Kevin; Papadopoulos, Gregory; Nelson, Scott; Hartmann, Gary; Ramohalli, Gautham (1984), Multi-Microprocessor Flight Control System (Technical Report), Wright-Patterson Air Force Base, OH 45433, USA: AFWAL/FIGL U.S. Air Force Systems Command, AFWAL-TR-84-3076
  13. ↑ "SIFT: design and analysis of a fault-tolerant computer for aircraft control". Microelectronics Reliability. 19 (3): 190. 1979. ISSN 0026-2714. doi:10.1016/0026-2714(79)90211-7.
  14. ↑ Castro, M.; Liskov, B. (2002). "Practical Byzantine Fault Tolerance and Proactive Recovery". ACM Transactions on Computer Systems. Association for Computing Machinery. 20 (4): 398–461. CiteSeerX 10.1.1.127.6130 Freely accessible. doi:10.1145/571637.571640.
  15. ↑ Abd-El-Malek, M.; Ganger, G.; Goodson, G.; Reiter, M.; Wylie, J. (2005). "Fault-scalable Byzantine Fault-Tolerant Services". Association for Computing Machinery. doi:10.1145/1095809.1095817.
  16. ↑ Cowling, James; Myers, Daniel; Liskov, Barbara; Rodrigues, Rodrigo; Shrira, Liuba (2006). HQ Replication: A Hybrid Quorum Protocol for Byzantine Fault Tolerance. Proceedings of the 7th USENIX Symposium on Operating Systems Design and Implementation. pp. 177–190. ISBN 1-931971-47-1.
  17. ↑ Kotla, Ramakrishna; Alvisi, Lorenzo; Dahlin, Mike; Clement, Allen; Wong, Edmund (December 2009). "Zyzzyva: Speculative Byzantine Fault Tolerance". ACM Transactions on Computer Systems. Association for Computing Machinery. 27 (4). doi:10.1145/1658357.1658358.
  18. ↑ Guerraoui, Rachid; Kneževic, Nikola; Vukolic, Marko; Quéma, Vivien (2010). The Next 700 BFT Protocols. Proceedings of the 5th European conference on Computer systems. EuroSys.
  19. ↑ Clement, A.; Wong, E.; Alvisi, L.; Dahlin, M.; Marchetti, M. (April 22–24, 2009). Making Byzantine Fault Tolerant Systems Tolerate Byzantine Faults (PDF). Symposium on Networked Systems Design and Implementation. USENIX.
  20. ↑ Aublin, P.-L.; Ben Mokhtar, S.; Quéma, V. (July 8–11, 2013). RBFT: Redundant Byzantine Fault Tolerance. 33rd IEEE International Conference on Distributed Computing Systems. International Conference on Distributed Computing Systems. Archived from the original on August 5, 2013.
  21. ↑ Bahsoun, J. P.; Guerraoui, R.; Shoker, A. (2015-05-01). "Making BFT Protocols Really Adaptive". Parallel and Distributed Processing Symposium (IPDPS), 2015 IEEE International: 904–913. doi:10.1109/IPDPS.2015.21.
  22. ↑ Chun, Byung-Gon; Maniatis, Petros; Shenker, Scott; Kubiatowicz, John (2007-01-01). "Attested Append-only Memory: Making Adversaries Stick to Their Word". Proceedings of Twenty-first ACM SIGOPS Symposium on Operating Systems Principles. SOSP '07. New York, NY, USA: ACM: 189–204. ISBN 9781595935915. doi:10.1145/1294261.1294280.
  23. ↑ Veronese, G. S.; Correia, M.; Bessani, A. N.; Lung, L. C.; Verissimo, P. (2013-01-01). "Efficient Byzantine Fault-Tolerance". IEEE Transactions on Computers. 62 (1): 16–30. ISSN 0018-9340. doi:10.1109/TC.2011.221.
  24. ↑ UpRight. Google Code repository for the UpRight replication library.
  25. ↑ BFT-SMaRt. Google Code repository for the BFT-SMaRt replication library.
  26. ↑ Archistar. github repository for the Archistar project.
  27. ↑ Archistar-bft BFT state-machine. github repository for the Archistar project.
  28. ↑ Askemos/BALL project home page
  29. ↑ Tendermint github repository for the Tendermint project
  30. ↑ M., Paulitsch; Driscoll, K. (9 January 2015). "Chapter 48:SAFEbus". In Zurawski, Richard. Industrial Communication Technology Handbook, Second Edition. CRC Press. pp. 48–1–48–26. ISBN 978-1-4822-0733-0.
  31. ↑ Thomas A. Henzinger; Christoph M. Kirsch (26 September 2001). Embedded Software: First International Workshop, EMSOFT 2001, Tahoe City, CA, USA, October 8-10, 2001. Proceedings (PDF). Springer Science & Business Media. pp. 307–. ISBN 978-3-540-42673-8.
  32. ↑ Yeh, Y.C. (2001). "Safety critical avionics for the 777 primary flight controls system". 1: 1C2/1–1C2/11. doi:10.1109/DASC.2001.963311.
  33. ↑ ELC: SpaceX lessons learned [LWN.net]
  34. ↑ Nanya, T.; Goosen, H.A. (1989). "The Byzantine hardware fault model". IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems. 8 (11): 1226–1231. ISSN 0278-0070. doi:10.1109/43.41508.
  35. ↑ Martins, Rolando; Gandhi, Rajeev; Narasimhan, Priya; Pertet, Soila; Casimiro, António; Kreutz, Diego; Veríssimo, Paulo (2013). "Experiences with Fault-Injection in a Byzantine Fault-Tolerant Protocol". 8275: 41–61. ISSN 0302-9743. doi:10.1007/978-3-642-45065-5_3.
  36. ↑ US patent 7475318, Kevin R. Driscoll, "Method for testing the sensitive input range of Byzantine filters", issued 2009-01-06, assigned to Honeywell International Inc.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.