Bus duct

5000 ampere copper and 4000A aluminium bus ducts
Bus duct inside an electrical service building at a Canadian oil refinery.
Bus duct inside an electrical closet in Mississauga Civic Centre, firestopped along with electrical conduit using firestop mortar.
1992 Bus duct segment with internal factory firestop that was replaced prior to fire testing with firestop mortar. To supply such systems, the bus duct manufacturer had to know where the duct penetrated fire separations required to have a fire-resistance rating.

In electrical power distribution, a bus duct (also called busway), is a sheet metal duct containing either copper or aluminium busbars for the purpose of conducting a substantial current of electricity. It is an alternative means of conducting electricity to power cables or cable bus.

Construction

Similar to cable tray, bus ducts have thicker, cold-formed steel side rails and thinner sheet metal coverings. Busbars inside may be separated with distinct and even gaps between them, or “sandwiched” together.

Typically, individual busbars are wrapped or coated with a non-conducting, covalent material, such as plastic or (in older systems) electrical tape.

At the connection point, busbars flare out to enable connection to the next segment.

Use and application

Bus ducts are used in commercial and industrial settings, both indoors and outdoors. Manufacturers deliver them assembled in large segments for electrical contractors to connect and support.

A plug-in bus duct system or busway can have disconnect switches and other devices mounted on it, for example, to distribute power along a long building. Many forms of busway allow plug-in devices such as switches and motor starters to be easily moved; this provides flexibility for changes on an assembly line,for example. [1]

Feeder busway is used to interconnect equipment, such as between a transformer and a switchgear line up. A variant type is low-impedance busway, which is designed to have lower voltage drop by virtue of close spacing of bus bars, which reduces inductive reactance.

A trolley busway provides power to equipment that must be frequently moved. The busway is open at the bottom, and a movable collector assembly "trolley" is used to connect between the fixed bus bars in the busway and the cable connected to moving equipment. [1] Bus ducts are building service penetrants that are required to be externally firestopped where they penetrate fire separations required to have a fire-resistance rating. Any internal firestops that are supplied by the manufacturer may be tested as integral components to either UL857 or IEEE C37.23 for North American models, and then via ASTM E814, UL1479 or ULC-S115. Bus duct-internal firestops mitigate the transmission of internal fires, smoke and heat between fire compartments through the combustion of bus duct-internal covalent wrappings, spacers and brackets.

See also

References

Wikimedia Commons has media related to Bus ducts.
Wikimedia Commons has media related to Bus duct fire testing.
Wikimedia Commons has media related to Bus duct fire test UL system C-BJ-8028.
  1. 1 2 Terrel Croft, Wilford Summers (ed)American Electricians Handbook Eleventh Edition, McGraw-Hill 1987, ISBN 0-07013932-6, pages 9-114 through 9-132
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.