Briquette

Some charcoal briquettes

A briquette (or briquet) is a compressed block of coal dust[1] or other combustible biomass material such as charcoal, sawdust, wood chips,[2] peat, or paper used for fuel and kindling to start a fire. The term comes from the French language and is related to brick.

Coal briquettes

Coal briquette
Coal briquette

Coal briquettes have long been produced as a means of using up 'small coal', the finely broken coal inevitably produced during the mining process. Otherwise this is difficult to burn as it is both hard to arrange adequate airflow through a fire of these small pieces, also it tended to be drawn up and out of the chimney by the draught, giving visible black smoke.

The first briquettes were known as culm and were hand-moulded with a little wet clay as a binder. These could be difficult to burn efficiently, as the unburned clay produced a large ash content, blocking airflow through a grate.

With Victorian developments in engineering, particularly the hydraulic press, it became possible to produce machine-made briquettes with minimal binder content. A tar or pitch binder was used, obtained first from gas making and later from petrochemical sources. These binders burned away completely, making it a low-ash fuel. A proprietary brand of briquettes from the South Wales coalfield was Phurnacite, developed by Powell Duffryn.[3] These were intended to emulate a high-quality anthracite coal, such as that from the Cynheidre measures. This involved blending a mixture of coals from different grades and colliery sources. Phurnacite used the following mix:[3]

Early briquettes were large and brick-shaped. They could be stacked, or even built into walls. The Antarctic expeditions of both Shackleton and Scott took large quantities of these briquettes with them and used them to build pony stables. As the ponies were eaten, as planned, for food, the stables could be dismantled and used for fuel.[3] Phurnacite briquettes later adopted a squared oval shape. This regular shape packed well as a good firebed, with plentiful airflow. They are also easy to mechanically feed, allowing the development of automatically controlled heating boilers that could run for days without human intervention.

Charcoal briquettes

Charcoal briquettes sold for cooking food can include:[4][5]

Some briquettes are compressed and dried brown coal extruded into hard blocks. This is a common technique for low rank coals. They are typically dried to 12-18% moisture, and are primarily used in household and industry.

Japanese briquettes

Use in China

Fuel briquettes, called mei (coal 煤), sold throughout China

Throughout China, cylindrical briquettes, called "fēng wō méi" (beehive coal 蜂窩煤 / 蜂窝煤) or "Mei" (coal 煤) or "liàn tàn" (kneaded coal 練炭 / 练炭), are used in purpose-built cookers.

The origin of "Mei" is "Rentan" (kneaded coal 練炭) of Japan. Rentan was invented in Japan in the 19th century, and spread to Manchukuo, Korea and China in the first half of the 20th century. There were many Rentan factories in Manchukuo and Pyongyang. Although Rentan went out of use in Japan after the 1970s, it is still popular in China, Korea ("yeon tan" kneaded coal 연탄) and Vietnam ("than" coal).

The cookers are simple, ceramic vessels with metal exteriors. Two types are made: the single, or triple briquette type, the latter holding the briquettes together side by side. These cookers can accommodate a double stack of cylinders. A small fire of tinder is started, upon which the cylinder(s) is placed. When a cylinder is spent, another cylinder is placed on top using special tongs, with the one below igniting it. The fire can be maintained by swapping spent cylinders for fresh ones, and retaining a still-glowing spent cylinder.

Each cylinder lasts for over an hour. These cookers are used to cook, or simmer, pots of tea, eggs, soups, stews, etc. The cylinders are delivered, usually by cart, to businesses, and are very inexpensive.

Peat briquettes

Peat block

In Ireland, peat briquettes were a common type of solid fuel, largely replacing sods of raw peat as a domestic fuel. These briquettes consist of shredded peat, compressed to form a virtually smokeless, slow-burning, easily stored and transported fuel. Although often used as the sole fuel for a fire, they are also used to quickly and easily light a coal fire.

Biomass briquettes

Straw or hay briquettes
Biomass briquette

Biomass briquettes are made from agricultural waste and are a replacement for fossil fuels such as oil or coal, and can be used to heat boilers in manufacturing plants, and also have applications in developing countries. Biomass briquettes are a renewable source of energy and avoid adding fossil carbon to the atmosphere.

A number of companies in India have switched from furnace oil to biomass briquettes to save costs on boiler fuels. The use of biomass briquettes is predominant in the southern parts of India, where coal and furnace oil are being replaced by biomass briquettes. A number of units in Maharashtra (India) are also using biomass briquettes as boiler fuel. Use of biomass briquettes can earn Carbon Credits for reducing emissions in the atmosphere. Lanxess India and a few other large companies are supposedly using biomass briquettes for earning Carbon Credits by switching their boiler fuel. Biomass briquettes also provide more calorific value/kg and save around 30-40 percent of boiler fuel costs.

A popular biomass briquette emerging in developed countries takes a waste produce such as sawdust, compresses it and then extrudes it to make a reconstituted log that can replace firewood. It is a similar process to forming a wood pellet but on a larger scale. There are no binders involved in this process. The natural lignin in the wood binds the particles of wood together to form a solid. Burning a wood briquette is far more efficient than burning firewood. Moisture content of a briquette can be as low as 4%, whereas green firewood may be as high as 65%.

For example, parameters of fuel briquettes made by extrusion from sawdust in Ukraine:

Parameter Value
Briquette density, t/m³ 1.0-1.2
Heat content, MJ/kg 19.3-20.5
Ash content, % 0.5-1.5

(MJ = Megajoules. 3.6 MJ equals 1 kWh.)

The extrusion production technology of briquettes is the process of extrusion screw wastes (straw, sunflower husks, buckwheat, etc.) or finely shredded wood waste (sawdust) under high pressure when heated from 160 to 350 °C (320 to 662 °F). As shown in the table above the quality of such briquets, especially heat content, is much higher comparing with other methods like using piston presses.

Sawdust briquettes have developed over time with two distinct types: those with holes through the centre, and those that are solid. Both types are classified as briquettes but are formed using different techniques. A solid briquette is manufactured using a piston press that compresses sandwiched layers of sawdust together. Briquettes with a hole are produced with a screw press. The hole is from the screw thread passing through the centre, but it also increases the surface area of the log and aids efficient combustion.

Paper briquettes

Paper briquettes are the byproduct of a briquettor, which compresses shredded paper material into a small cylindrical form. Briquettors are often sold as add-on systems to existing disintegrator or rotary knife mill shredding systems. The NSA has a maximum particle size regulation for shredded paper material that is passed through a disintegrator or rotary knife mill, which typically does not exceed 1/8” square.[6] This means that material exiting a disintegrator is the appropriate size for compression into paper briquettes, as opposed to strip-cut shredders which produce long sheets of paper.

After being processed through the disintegrator, paper particles are typically passed through an air system to remove dust and unwanted magnetic materials before being sent into the briquettor. The air system may also be responsible for regulating moisture content in the waste particles, as briquetting works optimally within a certain range of moisture. Studies have shown that the optimal moisture percentage for shredded particles is 18% for paper and 22% for wheat straw.[7]

Environmental impact

Briquetted paper has many notable benefits, many of which minimize the impact of the paper waste generated by a shredding system. Several manufactures claim up to 90% volume reduction of briquetted paper waste versus traditional shredding. Decreasing the volume of shredded waste allows it to be transported and stored more efficiently, reducing the cost and fuel required in the disposal process.

In addition to the cost savings associated with reducing the volume of waste, paper briquettes are more useful in paper mills to create recycled paper than uncompressed shredded material. Compressed briquettes can also be used as a fuel for starting fires or as an insulating material.

Safety

Charcoal burners should not be used in enclosed environments to heat homes, as Carbon monoxide poisoning can be fatal.[8]

See also

References

  1. "briquette, n. 2.". Oxford English Dictionary. 2nd ed. 2009. Print.
  2. "briquette." American Heritage® Dictionary of the English Language, 5th. ed.. 2011. Houghton Mifflin Harcourt Publishing Company 15 Mar. 2015 http://www.thefreedictionary.com/briquette
  3. 1 2 3 "The Phurnacite plant, the briquette". Aberdare Online.
  4. Joe O'Connell. Kingsford Brand Charcoal Ingredients. California Barbecue Association website. Retrieved 11 May 2007.
  5. All About Charcoal. virtualweberbullet.com. Retrieved May 11, 2007.
  6. NSA Standards for Disintegrators
  7. Physical properties of briquettes from waste paper and wheat straw mixtures
  8. "Man died from carbon monoxide poisoning after using 'heat beads' in Greystanes home". The Sydney Morning Herald.
Wikimedia Commons has media related to Briquettes.
Wikisource has the text of the 1911 Encyclopædia Britannica article Briquette.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.