Bloomers Hole Footbridge

Bloomers Hole Footbridge
Coordinates 51°41′12″N 1°40′33″W / 51.686611°N 1.675929°W / 51.686611; -1.675929Coordinates: 51°41′12″N 1°40′33″W / 51.686611°N 1.675929°W / 51.686611; -1.675929
Carries Footpath
Crosses River Thames
Locale Oxfordshire
Characteristics
Material Steel
No. of spans 1
History
Designer Charlie Benner
Opened 2000

Bloomers Hole Footbridge is a footbridge across the River Thames in Oxfordshire, England. It is situated on the reach above Buscot Lock and was installed in 2000 to carry the Thames Path across the Thames. It is built of steel encased in wood to make it look like a timber structure.

The Countryside Agency commissioned Oxfordshire County Council to design and build the bridge and the design was undertaken by Charlie Benner, the senior engineer.[1] The bridge was installed in 2000. The two 27-metre (89 ft) 8-tonne steel beams were put in place by a Chinook helicopter from RAF Brize Norton.[2]

Bloomer's Hole is at a wide bend about quarter of a mile downstream of St John's Lock. The river winds tortuously along here, and although a cut of the river across Bloomer Meadow was mooted as early as 1802, it was never implemented.[3]

See also

References

  1. Statutory instrument authorising construction
  2. Swindon Advertiser, Friday 26 May 2000.
  3. Fred. S. Thacker The Thames Highway: Volume II Locks and Weirs 1920 - republished 1968 David & Charles
Next crossing upstream River Thames Next crossing downstream
St John's Bridge (road) Bloomers Hole Footbridge Buscot Lock (pedestrian)
Next crossing upstream Thames Path Next crossing downstream
southern bank
Water Eaton House Bridge
Bloomers Hole Footbridge northern bank
Radcot Bridge


This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.