BMW B58

BMW B58 engine
Overview
Manufacturer BMW
Production 2015present
Combustion chamber
Configuration Straight-6
Chronology
Predecessor BMW N55

The BMW B58 is a turbocharged direct injection straight-6 DOHC engine which began production in 2015.[1] It was launched in the F30 340i.[2] It is also part of BMW's new modular engine family, which is based on each cylinder comprising 500cc following the B38 and B48 engine.[3] Similar with its N55 predecessor, the B58 also features a single twin-scroll turbo, direct fuel injection, Dual Vanos and Valvetronic.

The B58 (installed in the M240i) topped Ward's 10 Best Engines of 2017 list. The B58 is rated at 335 horsepower and 369 lb-ft of torque, while achieving 26 mpg.[4]

Design

As the successor of the BMW N55 engine, the B58 also displaces 3.0 litre (though is slightly larger at 2998cc compared to 2979cc for the N55). It has a larger turbocharger with a 6 percent increase in turbine wheel size and 10 percent increase in compressor wheel diameter, resulting in a 20 percent increase in boost pressure. The B58 uses a water-to-air intercooler integrated into the intake plenum, thus reducing the charged air volume between the compressor and the intake. This increases performance by maintaining more even temperatures inside the intake. BMW has also incorporated an engine-mounted encapsulation system, which allows the engine to retain much of its heat for up to 36 hours which helps to reduce emissions and wear and tear during start-up, especially in colder climates.[5] As a part of BMW's new modular engine family, the crankcase is a completely new design identically with the B57 diesel version, engineered as both a gasoline and diesel engine in one common part. The closed deck crankcase is equipped with a completely new structure which can be identified by a complex array of ribs on the exhaust and intake side and an additional reinforcement frame on the oil pump side.

Models

EngineDisplacementPowerTorqueRedlineBoreStrokeCRYear
B58B30M02,998 cc (183 cu in)240 kW (322 hp) @ 5500-6500450 N·m (332 lb·ft) @ 1380-5000700082 mm (3.2 in)94.6 mm (3.7 in)11:12015
B58B30O0[6]250 kW (335 hp) @ 5500500 N·m (369 lb·ft) @ 1520-45002016

Applications

B58B30M0 (240 kW)

B58B30O0 (250 kW)

References

  1. DeMattia, Nico (28 October 2015). "BMW’s N55 engine will be missed, but the new B58 might be even better". BMWBlog. Retrieved 20 May 2016.
  2. "BMW F30 LCI 340i". www.paultan.org.
  3. Meiners, Jens (22 April 2011). "BMW’s New Three-, Four-, and Six-Cylinder Engine Family Detailed". CARandDriver. Retrieved 21 May 2016.
  4. Murphy, Tom. "Seven Turbos, Three Hybrids Share Wards 10 Best Engines Honors 2017 | Wards 10 Best Engines". WardsAuto. Penton. Retrieved 24 May 2017.
  5. Boeriu, Horatiu (11 December 2015). "BMW’s B58 engine among Wards’ 10 Best engines for 2016". BMWBlog. Retrieved 21 May 2016.
  6. Sheehan, Sam (16 May 2016). "New bmw m140i m240i and plug 7 series range revealed". autocar.co.uk. Retrieved 22 May 2016.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.