Austin station (CTA Blue Line)

Austin
 
1W
1000S
Location 1050 South Austin Boulevard
Oak Park, Illinois 60304
Coordinates 41°52′15″N 87°46′37″W / 41.870851°N 87.776812°W / 41.870851; -87.776812
Owned by Chicago Transit Authority
Line(s)
Platforms 1 island platform
Tracks 2
Construction
Structure type Surface Level
History
Opened March 20, 1960[1][2]
Traffic
Passengers (2015) 634,972[3]Decrease 0.6% (CTA)
Rank 99 out of 143[lower-alpha 1]
Services
Preceding station   Chicago "L"   Following station
toward O'Hare
Blue Line
toward Forest Park

Austin is a station on the 'L' system, serving the Blue Line's Forest Park branch. It is located below South Austin Boulevard in the Eisenhower Expressway in Oak Park, Illinois. The station has an auxiliary entrance/exit at Lombard Avenue. After CTA Blue Line trains pass the station, the CTA line splits away from the Baltimore and Ohio Chicago Terminal Railroad lines letting the CTA Blue Line to continue to Chicago afterwards.

Station layout

G Ground level Entrance/Exit, station building
P
Platform level
Southbound Blue Line toward Forest Park (Oak Park)
Island platform, doors will open on the left
Northbound Blue Line toward O'Hare (Cicero)

Bus connections

CTA

Pace

Notes and references

Notes

  1. Due to possible double-counting of physically-connected stations, the CTA's official 2015 tally of stations was 146, but for ridership purposes reported having only 143 stations.

References

  1. "CTA to Open New Congress Right of Way". Chicago Daily Tribune. March 20, 1960. p. W3.
  2. "Congress CTA on Permanent Right of Way". Chicago Daily Tribune. March 20, 1960. p. 25.
  3. "Monthly Ridership Report December 2015" (PDF). Chicago Transit Authority Ridership Analysis and Reporting. January 11, 2016. Retrieved March 11, 2016.


A CTA train heads towards the Austin station in 1968 (then known as the Congress Branch instead of the Blue Line)
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.