Aston Martin AMR1

Aston Martin AMR1

Aston Martin AMR1 at 1989 1000 km Brands Hatch
Category	Group C sports prototype
Constructor	Aston Martin Proteus Technologies
Designer(s)	Max Bostrom Ray Mallock
Technical specifications
Chassis	Carbon-kevlar monocoque
Suspension (front)	Independent, double wishboned with anti-roll bar
Suspension (rear)	Independent, double wishboned with anti-roll bar
Length	15 ft 8 in (4,780 mm)
Width	6 ft 6 1⁄4 in (1,990 mm)
Height	3 ft 4 in (1,020 mm)
Wheelbase	9 ft 6 in (2,900 mm)
Engine	Aston Martin (Callaway) RDP87 5998 cc/6300 cc alloy V8, Zytec ECU, 350 km/h (220 mph) naturally aspirated, mid-longitudinally mounted
Transmission	5-speed Manual
Weight	1,988 to 2,178 lb (902 to 988 kg)
Tyres	Goodyear Eagle
Competition history
Notable entrants	Aston Martin ( Ecurie Ecosse)
Notable drivers	Brian Redman David Leslie Ray Mallock David Sears Michael Roe Costas Los Stanley Dickens
Debut	1989 480km of Dijon
Races Wins Poles F.Laps 7 0 0 0
Constructors' Championships	0
Drivers' Championships	0

The Aston Martin AMR1 was a Group C formula racing car developed in 1989 for car manufacturer Aston Martin. It participated in the 1989 World Sports Prototype Championship and 1989 24 Hours of Le Mans.

Design

Following Aston Martin's racing efforts as an engine supplier for Nimrod Racing and EMKA Racing in the early 1980s, it was decided that Aston Martin would create their own car for the World Sports Prototype Championship. Thus in late 1987 a partnership between Peter Livanos, Victor Gauntlett, Richard Williams and Ray Mallock - through his shareholding in Scottish racing firm Ecurie Ecosse would be formed, creating a new company known as Proteus Technology Ltd. (Protech). The team would develop and run the AMR1 project, competing for the first time during the 1989 season.

Richard Williams was named as the organisations managing director and team manager. Ray Mallock was engineering director, with him, Max Boxstrom would be the lead designer and Reeves Callaway, of Callaway Cars Incorporated, would build the engine. The chassis and bodywork designed by Boxstrom would be built by British firm Courtaulds. For the engine, Callaway would use 5.3L V8 units from the newly launched Aston Martin Virage, ending up with a 600 hp (450 kW) 6.0L engine known as the RDP87. With this combination, a total of five AMR1 chassis would be finished in early 1989.

Racing history

With AMR1/01 completed, testing began in preparation for the first race at Suzuka Circuit in Japan. Unfortunately, AMR1/01 was involved in an accident during testing at Donington Park and was damaged beyond repair. Thus Aston Martin was forced to skip the first round, incurring a $250,000 fine by FIA's newly amended rule which required C1 cars to enter all round of the season and instead premiered chassis AMR1/01 at Dijon-Prenois, where it finished a disappointing 17th.

Although not part of the World Sports Prototype Championship in 1989, Aston Martin next turned to the 24 Hours of Le Mans. Two cars were entered, chassis #01 and #03. The cars unfortunately were underpowered in comparison to their competitors, qualifying 32nd and 40th in a field of 56 cars. During the race itself, the cars were able to run in the mid-pack before AMR1/03 suffered electrical problems and was forced to retire during the first half of the race. AMR1/01 was able to continue on, was able to finish in 11th place overall.

Due to a lack of time between Le Mans and the 3rd round of the World Sports Prototype Championship, Aston Martin decided to skip it, returning instead at Brands Hatch where AMR1/04 took home an exciting 4th-place finish in front of the British crowd, then following it up with an 8th-place finish at the Nürburgring.

For the 6th round of the year, the World Sports Prototype Championship again returned to British soil. Aston Martin therefore decided to run two AMR1s at Donington Park, debuting newly built chassis #05. The two cars were able to finish 6th and 7th. Both cars raced again at Circuit de Spa-Francorchamps where Aston Martin suffered their only other failure to finish in the season, chassis #04 having suffered engine failure. However, chassis #05, which had now been upgraded with an even more powerful 720+ bhp, Version II 6.3L V8, was able to finish a respectable 7th. For the final round in Mexico, Aston Martin decided to take only chassis #05, where they finished 8th.

Ending the season, Aston Martin had finished 6th in the Teams Championship, behind the factory Mercedes-Benz, Porsche, Jaguar, and Nissan teams, although they were able to defeat the Toyota team.

Cancellation

AMR2

At the time of the end of the 1989 season, Protech was already beginning development of the AMR2 for 1990. With the intention for this car to race alongside another two AMR1's in the 1990 24 Hours of Le Mans. The AMR2 combined the chassis of the AMR1, a newer and more powerful 6.3L Version III V8, and an evolved, more aerodynamic body design. The AMR2 was promised to be faster in a straight line then the AMR1 (with a predicted top speed of 230+ mph), a problem which had greatly hindered AMR1 at Le Mans.

However, with the announcement from the FIA that Group C engine regulations were to change to only allow 3.5 litre normally aspirated engines from 1991, There was not the budget available to develop a new engine and Protech was disbanded and closed in February 1990 before the chassis AMR2/06 could be completed. AMR2/06 was later built up from left over parts and fitted with an AMR1 body. Aesthetically AMR2/06 looks exactly the same as an AMR1 even with the same Mobil 1 livery.

AMR3

Shortly before closure of Protech, plans for another racing car were put in place. For a 1991 Aston Martin AMR3, this time to be designed by Tony Southgate. But Aston Martin were forced to drop out of motor racing due to the economic instability of the company at the time. It would be the last racing car produced by Aston Martin for fifteen years until the launch of the DBR9 in 2005.

Chassis

An Aston Martin AMR1 now used in Historic Sportcars Racing in North America

A total of five AMR1 chassis were built.

AMR1/01 is now owned by the Aston Martin Heritage Trust.

AMR1/03 had also been sold on the open market, selling for €294,250 ($359,987) at auction in 2004^[1]

AMR1/04 was the first AMR1 to reach auction, selling at a Brooks (now Bonhams)/Aston Martin Lagonda auction in 2000. The car sold for £133,500. Currently AMR1/04 is used in the Historic Sportscar Racing series in North America.

AMR1/05 is currently raced in Europe by owner Paul Whight.

Results

An Aston Martin AMR1 at Goodwood Festival of Speed 2007

Year	Race	Chassis	Drivers	Pos
1989	Dijon 480 km	AMR1/01	Brian Redman David Leslie	17th
1989	Le Mans	AMR1/01	Brian Redman Michael Roe Costas Los	11th
1989	Le Mans	AMR1/03	David Leslie Ray Mallock David Sears	DNF
1989	Brands Hatch	AMR1/04	Brian Redman David Leslie	4th
1989	Nürburgring	AMR1/04	Brian Redman David Leslie	8th
1989	Donington	AMR1/04	Michael Roe David Leslie	6th
1989	Spa 480 km	AMR1/04	Michael Roe David Leslie	DNF
1989	Donington	AMR1/05	Brian Redman David Sears	7th
1989	Spa 480 km	AMR1/05	Brian Redman Stanley Dickens	7th
1989	Mexico 480 km	AMR1/05	Brian Redman David Leslie	8th

References

Wikimedia Commons has media related to Aston Martin AMR1.

External links

• Aston Martin Picture Gallery - AMR1 AstonMartins.com
• Technical analysis of AMR1 MulsannesCorner.com
• Aston Martin AMR1 Picture Gallery AllRacingCars.com

Aston Martin Racing

Noted personnel Lionel Martin Robert Bamford Ted Cutting Willie Watson Frank Feely David Brown Noted drivers Roy Salvadori Carroll Shelby Maurice Trintignant David Brabham Darren Turner Rickard Rydell Stéphane Ortelli Jan Charouz Tomáš Enge Stefan Mücke Bruno Senna Frédéric Makowiecki Le Mans Cars DB1 DB2 DB3S DBR1 RHAM/1 AMR1 DBR9 Formula One cars DBR4 DBR5 Current Le Mans Team Aston Martin Racing