Antonov A-2

A-2
Role Training glider
National origin USSR
Designer Oleg Konstantinovich Antonov
First flight 1936
Number built ca. 2,300

The Antonov A-2 and related designs were a family of two-seat training gliders produced in the Soviet Union in the 1930s and 1940s, all derived from the single-seat Antonov A-1 family.[1] They were produced in large numbers, with at least 2,300 built by 1937, and together with the single-seaters, production exceeded 7,600 by the same year.[2]

Like the A-1, the A-2 was a minimalist primary glider, with a conventional tail mounted on a boom and a strut-braced monoplane wing, mounted parasol-fashion. However, while the single-seat primary gliders featured wings of constant chord, the two-seaters used the longer-span, tapered wings that had been developed for the soaring versions of the single-seat family (P-s1 and P-s2).[3] The other major difference was the design of the cockpit gondola. The single-seaters featured an aerodynamic fairing that slid on and off to provide access to the pilot's seat.[4] The two-seaters, however, had a permanently fixed cockpit pod that seated the pilot and instructor in tandem, open cockpits, each with a small windscreen The rear cockpit was located directly beneath the wing and was accessed via a door on the port side of the gondola.[3] Apart from the change in gondola, all other components remained interchangeable with the Ps-2[5]

Variants

In each case, the "s" stands for serii (серии – "series")

Uchebnyi (Учебный – "Trainer")


Specifications (U-s5)

Data from Shushurin 1938, 67

General characteristics

Performance

Notes

  1. Sheremetev 1959, 44
  2. Krasil'shchikov 1991, 143
  3. 1 2 Sheremetev 1959, 45
  4. Sheremetev 1959, 40
  5. Shushurin 1938, 67

References

Wikimedia Commons has media related to Antonov aircraft.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.