Antiresonance

In the physics of coupled oscillators, antiresonance, by analogy with resonance, is a pronounced minimum in the amplitude of one oscillator at a particular frequency, accompanied by a large shift in its oscillation phase. Such frequencies are known as the system's antiresonant frequencies, and at these frequencies the oscillation amplitude can drop to almost zero. Antiresonances are caused by destructive interference, for example between an external driving force and interaction with another oscillator.

Antiresonances can occur in all types of coupled oscillator systems, including mechanical, acoustic, electromagnetic and quantum systems. They have important applications in the characterization of complex coupled systems.

Antiresonance in coupled oscillators

Steady-state amplitude and phase of two coupled harmonic oscillators as a function of frequency.

The simplest system in which antiresonance arises is a system of coupled harmonic oscillators, for example pendula or RLC circuits.

Consider two harmonic oscillators coupled together with strength $g$ and with one oscillator driven by an oscillating external force $F$ . The situation is described by the coupled ordinary differential equations

\begin{array}{lcl} \ddot{x}_1 + 2\gamma_1 \dot{x}_1 - 2g \omega_1 x_2 + \omega_1^2 x_1 &=& 2F\cos\omega t \\ \ddot{x}_2 + 2\gamma_2 \dot{x}_2 - 2g \omega_2 x_1 + \omega_2^2 x_2 &=& 0 \end{array}

where the $\omega _{i}$ represent the resonance frequencies of the two oscillators and the $\gamma _{i}$ their damping rates. Changing variables to the complex parameters $\alpha_1 = \omega_1 x_1 + ip_1/m_1$ , $\alpha_2 = \omega_2 x_2 + ip_2/m_1$ allows us to write these as first-order equations:

\begin{array}{lcl} \dot{\alpha}_1 &=& i\omega_1 \alpha_1 - \gamma_1(\alpha_1 - \alpha_1^*) - ig\tfrac{\omega_1}{\omega_2}(\alpha_2 + \alpha_2^*) + iF(e^{i\omega t}+e^{-i\omega t}) \\ \dot{\alpha}_2 &=& i\omega_2 \alpha_2 - \gamma_2(\alpha_2 - \alpha_2^*) - ig\tfrac{\omega_2}{\omega_1}(\alpha_1 + \alpha_1^*) \end{array}

We transform to a frame rotating at the driving frequency $\alpha_i \rightarrow \alpha_i e^{-i\omega t}$ , yielding

\begin{array}{lcl} \dot{\alpha}_1 &=& i\Delta_1 \alpha_1 - \gamma_1(\alpha_1 - \alpha_1^* e^{2i\omega t}) - ig\tfrac{\omega_1}{\omega_2}(\alpha_2 + \alpha_2^* e^{2i\omega t}) + iF(1+e^{2i\omega t}) \\ \dot{\alpha}_2 &=& i\Delta_2 \alpha_2 - \gamma_2(\alpha_2 - \alpha_2^* e^{2i\omega t}) - ig\tfrac{\omega_2}{\omega_1}(\alpha_1 + \alpha_1^* e^{2i\omega t}) \end{array}

where we have introduced the detunings $\Delta_i = \omega - \omega_i$ between the drive and the oscillators' resonance frequencies. Finally, we make a rotating wave approximation, neglecting the fast counter-rotating terms proportional to $e^{2i\omega t}$ , which average to zero over the timescales we are interested in (this approximation assumes that $\omega + \omega_i \gg \omega - \omega_i$ , which is reasonable for small frequency ranges around the resonances). Thus we obtain:

\begin{array}{lcl} \dot{\alpha}_1 &=& i (\Delta_1 + i\gamma_1) \alpha_1 - ig\tfrac{\omega_1}{\omega_2}\alpha_2 + iF \\ \dot{\alpha}_2 &=& i (\Delta_2 + i\gamma_2) \alpha_2 - ig\tfrac{\omega_2}{\omega_1}\alpha_1 \end{array}

Without damping, driving or coupling, the solutions to these equations are $\alpha_i(t) = \alpha_i(0) e^{i\Delta t}$ , which represent a rotation in the complex $\alpha$ plane with angular frequency $\Delta$ .

The steady-state solution can be found by setting $\dot{\alpha}_1 = \dot{\alpha}_2 = 0$ , which gives:

\begin{array}{lcl} \alpha_{1,ss} &=& \dfrac{-F(\Delta_2 + i\gamma_2)}{(\Delta_1 + i\gamma_1)(\Delta_2 + i\gamma_2)-g^2} \\ \alpha_{2,ss} &=& \dfrac{\omega_2}{\omega_1}\dfrac{-Fg}{(\Delta_1+ i\gamma_1)(\Delta_2 + i\gamma_2)-g^2} \end{array}

Examining these steady state solutions as a function of driving frequency, it is evident that both oscillators display resonances (peaks in amplitude accompanied by positive phase shifts) at the two normal mode frequencies. In addition, the driven oscillator displays a pronounced dip in amplitude between the normal modes which is accompanied by a negative phase shift. This is the antiresonance. Note that there is no antiresonance in the undriven oscillator's spectrum; although its amplitude has a minimum between the normal modes, there is no pronounced dip or negative phase shift.

Interpretation as destructive interference

Animation showing time evolution to the antiresonant steady-state of two coupled pendula. The red arrow represents a driving force acting on the left pendulum.

The reduced oscillation amplitude at an antiresonance can be regarded as due to destructive interference or cancellation of forces acting on the oscillator.

In the above example, at the antiresonance frequency the external driving force $F$ acting on oscillator 1 cancels the force acting via the coupling to oscillator 2, causing oscillator 1 to remain almost stationary.

Complex coupled systems

Example frequency-response function of a dynamical system with several degrees of freedom, showing distinct resonance-antiresonance behavior in both amplitude and phase.

The frequency response function (FRF) of any linear dynamic system composed of many coupled components will in general display distinctive resonance-antiresonance behavior when driven.^[1]

As a rule of thumb, it can be stated that as the distance between the driven component and the measured component increases, the number of antiresonances in the FRF decreases.^[2] For example, in the two-oscillator situation above, the FRF of the undriven oscillator displayed no antiresonance. Resonances and antiresonances only alternate continuously in the FRF of the driven component itself.

Applications

An important result in the theory of antiresonances is that they can be interpreted as the resonances of the system fixed at the excitation point.^[2] This can be seen in the pendulum animation above: the steady-state antiresonant situation is the same as if the left pendulum were fixed and could not oscillate. An important corollary of this result is that the antiresonances of a system are independent of the properties of the driven oscillator; i.e. they do not change if the resonance frequency or damping coefficient of the driven oscillator are altered.

This result makes antiresonances useful in characterizing complex coupled systems which cannot be easily separated into their constituent components. The resonance frequencies of the system depend on the properties of all components and their couplings, and are independent of which is driven. The antiresonances, on the other hand, are dependent upon the component being driven, therefore providing information about how it affects the total system. By driving each component in turn, information about all of the individual subsystems can be obtained, despite the couplings between them. This technique has applications in mechanical engineering, structural analysis,^[3] and the design of integrated quantum circuits.^[4]

Other uses

In electrical engineering, the word antiresonance may also be used to refer to the condition for which the impedance of an electrical circuit is very high, approaching infinity.

In an electric circuit consisting of a capacitor and an inductor in parallel, antiresonance occurs when the alternating current line voltage and the resultant current are in phase.^[5] Under these conditions the line current is very small because of the high electrical impedance of the parallel circuit at antiresonance. The branch currents are almost equal in magnitude and opposite in phase.^[6]

The principle of antiresonance is used in wave traps, which are sometimes inserted in series with antennas of radio receivers to block the flow of alternating current at the frequency of an interfering station, while allowing other frequencies to pass.^[7]^[8]

References

↑ Ewins, D. J. (1984). Modal Testing: Theory and Practice. New York: Wiley.
1 2 Wahl, F.; Schmidt, G.; Forrai, L. (1999). "On the significance of antiresonance frequencies in experimental structural analysis". Journal of Sound and Vibration. 219 (3): 379. Bibcode:1999JSV...219..379W. doi:10.1006/jsvi.1998.1831.
↑ Sjövall, P.; Abrahamsson, T. (2008). "Substructure system identification from coupled system test data". Mechanical Systems and Signal Processing. 22: 15. Bibcode:2008MSSP...22...15S. doi:10.1016/j.ymssp.2007.06.003.
↑ Sames, C.; Chibani, H.; Hamsen, C.; Altin, P. A.; Wilk, T.; Rempe, G. (2014). "Antiresonance Phase Shift in Strongly Coupled Cavity QED". Physical Review Letters. 112: 043601. Bibcode:2014PhRvL.112d3601S. PMID 24580448. arXiv:1309.2228 . doi:10.1103/PhysRevLett.112.043601.
↑ Kinsler, Lawrence E. et al. - Fundamentals of Acoustics - Wiley, 4 ed, Hardcover, ISBN 0-471-84789-5, 1999, p46
↑ Balanis, Constantine A. - Antenna Theory: Analysis and Design - Wiley-Interscience; 3 ed, Hardcover, ISBN 0-471-66782-X, 2005, p195
↑ Pozar, David M. - Microwave Engineering - Wiley, Hardcover, ISBN 0-471-44878-8, 2004 p275
↑ Sayre, Cotter W. - Complete Wireless Design - McGraw-Hill Professional; 2 ed, Hardcover, ISBN 0-07-154452-6, 2008, p4

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.