Cheese ripening
Cheese curing, alternatively Tushar or Bengali, is a process in cheesemaking. It is responsible for the distinct flavour of cheese, and through the modification of "ripening agents", determines the features that define many different varieties of cheeses, such as taste, texture, and body.[2] The process is "characterized by a series of complex physical, chemical and microbiological changes"[3] that incorporates the agents of: "bacteria and enzymes of the milk, lactic culture, rennet, lipases, added moulds or yeasts, and environmental contaminants."[2] The majority of cheese is ripened, save for fresh cheese.[2]
History
Cheese ripening was not always the highly industrialised process it is today; in the past, cellars and caves were used to ripen cheeses instead of the current highly regulated process involving machinery and biochemistry. Some cheeses still are made using more historical methods, such as the blue cheese Roquefort, which is required to be ripened in designated caves in south-eastern France.[4] However, with the invention of refrigeration in the 20th century, the process evolved considerably, and is much more efficient at producing a consistent quality of cheese, at a faster pace, and a lower cost (depending on the type of cheese).[4]
Process
After the initial manufacturing process of the cheese is done, the cheese ripening process occurs. This process is especially important, since it defines the flavour and texture of the cheese, which differentiates the many varieties. Duration is dependent on the type of cheese and the desired quality, but "three weeks to two or more years" is the general requirement for most cheeses.[5]
Ripening is influenced by a variety of factors, ranging from the microflora to the curd, and others. The enzymatic process is the most crucial process for all cheeses, although bacteria plays a role in many varieties.[5] The most important agents in this process include the four following elements: "Rennet, or a substitute for rennet, starter bacteria and associated enzymes, milk enzymes, second starter bacteria and associated enzymes, and non-starter bacteria". Each of these factors affects the cheese-ripening process differently, and has been the subject of much research. It is important for manufacturers to understand how each of these elements work, so that they are able to maintain the quality of the cheese while producing the cheese at an acceptable investment of time and cost.[6] These agents contribute to the three primary reactions that define cheese ripening: glycolysis, proteolysis, and lipolysis.[7]
By taking the cheese through a series of maturation stages where temperature and relative humidity are carefully controlled, the cheese maker allows the surface mould to grow and the mould ripening of the cheese by fungi to occur. Mould-ripened cheeses ripen faster than hard cheeses, in weeks as opposed to the typical months or even years.[8] This is because the fungi used are more biochemically active than the starter bacteria. Where the ripening occurs is largely dependent on the type of cheese: some cheeses are surface-ripened by moulds, such as Camembert and Brie; and some are ripened internally, such as Stilton. Surface ripening of some cheeses, such as Saint-Nectaire cheese, may also be influenced by yeasts which contribute flavour and coat texture.[9] Others are allowed by the cheesemaker to develop bacterial surface growths which give characteristic colours and appearances. The growth of Brevibacterium linens, for example, creates an orange coat to cheeses.[10]
In contrast to cheddaring, making cheeses like Camembert requires a more gentle treatment of the curd. It is carefully transferred to cheese hoops and the whey is allowed to drain from the curd by gravity, generally overnight. The cheese curds are then removed from the hoops to be brined by immersion in a saturated salt solution. This is because the amount of salt has a large effect on the rate of proteolysis in the cheese, stopping the bacteria from growing.[11] If white-mould spores have not been added to the cheese milk, the cheese maker applies them to the cheese either by spraying the cheese with a suspension of mould spores in water, or by immersing the cheese in a bath containing spores of, e.g., Penicillium candida.
Effect on features
Eyes
The round holes that are a characteristic feature of Swiss-type cheese[12] (e.g. Emmentaler cheese) and some Dutch-type cheeses are called "eyes". They are bubbles of carbon dioxide that is produced by bacteria in the cheese.
In Swiss-type cheeses, the eyes form as a result of the activity of propionic acid bacteria (propionibacteria), notably Propionibacterium freudenreichii subsp. shermanii.[13][14] In Dutch-type cheeses, the CO2 that forms the eyes results from the metabolisation of citrate by citrate-positive ("Cit+") strains of lactococci.[15]
Taste
The process of cheese ripening affects the taste of the final product. If the product is not ripened, the resulting cheese is tasteless, and so, all cheese is ripened except for fresh cheeses.[2] Different factors define taste in cheese, including casein, fat, brine, and many other elements. Brine, as an example, mixes with saliva, delivering the flavour of the cheese to the taste buds and determining the cheese's moistness.[16] Many of these elements are specific to the type of cheese. For instance, proline is more abundant in Emmental than in any other type of cheese, and gives the cheese its much sweeter taste.[17]
See also
- List of cheeses
- Food portal
References
- Fox, P.F. (ed.). Cheese: Chemistry, Physics, and Microbiology, Volume 1: General Aspects. Academic Press. ISBN 978-0-12-263652-3.
- Fox, Patrick; Cogan, Timothy; Guinee, Timothy. Fundamentals of Cheese Science. Springer Publishing. ISBN 978-0-8342-1260-2.
Footnotes
- ↑ Decker, John W. (1895). "Cheddar Cheese Making". John W. Decker, B.Agr. (Bachelor of Agriculture), Instructor in Dairying, University of Wisconsin. pp. 53–56. Retrieved 17 November 2015.
- 1 2 3 4 "Cheese: Cheese Ripening". University of Guelph Department of Dairy Science and Technology. Retrieved 2017-04-28.
- ↑ "Monitor biochemical changes during cheese ripening with infrared microspectroscopy.". Emerging Food R&D Report. Entrepreneur Magazine. Retrieved 2010-10-23.
- 1 2 Fox, Patrick. Cogan, Timothy. Guinee, Timothy. Fundamentals of Cheese Science. p. 350.
- 1 2 Fox, Patrick. Cheese: Chemistry, Physics and Microbiology. p. 389.
- ↑ Fox, Patrick. Cheese: Chemistry, Physics and Microbiology. p. 390.
- ↑ Fox, Patrick. Cheese: Chemistry, Physics and Microbiology. p. 392.
- ↑ Fox, Patrick. Cogan, Timothy. Guinee, Timothy. Fundamentals of Cheese Science. p. 349.
- ↑ Fox, Patrick. Cheese: Chemistry, Physics and Microbiology. p. 306.
- ↑ Fox, Patrick. Cheese: Chemistry, Physics and Microbiology. p. 205.
- ↑ Fox, Patrick. Cogan, Timothy. Guinee, Timothy. Fundamentals of Cheese Science. p. 166.
- ↑ P.L.H. McSweeney and P.R Fox; Metabolism of Residual Lactose and of Lactate and Citrate, in: Fox, p. 366
- ↑ P.L.H. McSweeney, Biochemistry of Cheese Ripening: Introduction and Overview, in: Fox, p. 349
- ↑ "Propionibacterium freudenreichii ssp shermanii ATCC9614: A bacterium used in the production of Emmental". Genoscope. 16 January 2008. Retrieved 23 October 2010.
- ↑ P.L.H. McSweeney and P.R Fox; Metabolism of Residual Lactose and of Lactate and Citrate, in: Fox, p. 367
- ↑ Fox, Patrick. Cheese: Chemistry, Physics and Microbiology. p. 327.
- ↑ Fox, Patrick. Cheese: Chemistry, Physics and Microbiology. p. 418.