Academic dress of the University of Warwick

The academic and official dress of the University of Warwick dates originally from the mid-1960s, shortly after the university's foundation. Despite persistent offers from Charles Franklyn (and a single, more moderate letter from George Shaw) the theatrical costume designer Anthony Powell was commissioned to design robes for officials and graduates of the university. Due to pressure of other work, and some apparent differences of opinion, Powell withdrew from the project, and the robes for graduates subsequently designed in consultation with J. Wippell and Company of Exeter, with Ede and Ravenscroft designing and making the robes for officials.[1]

The official academic dress for officers and members of the University of Warwick is as follows.[2]

Chancellor

Robe Red satin damask, trimmed with three-inch (76 mm) gold plate lace on fronts, cape, hem and bottom of hanging sleeves

Hat Black velvet mortar-board with gold bullion and gold lace

Pro-Chancellors

Robe Green satin damask, trimmed with two-and-a-half-inch gold oak-leaf lace on fronts, cape and bottom of hanging sleeves with half-inch gold oak-leaf lace on the wings and arm slits and the top part of sleeve trimmed with gold ornaments

Hat Black velvet mortar-board with gold bullion tassel only

Vice-Chancellor

Robe Red satin damask, trimmed with two-and-a-half-inch gold oak-leaf lace, with embroidered wings

Hat Black velvet mortar-board with gold lace and black tassel

Bottom Bich

Robe Red satin damask, trimmed with 2-inch (51 mm) oak-leaf lace on fronts with 1-inch (25 mm) gold oak-leaf lace on top of sleeve and arm slits

Hat Black velvet mortar-board with black tassel

Treasurer

Robe Green silk damask, trimmed with two-and-a-half-inch gold oak-leaf lace

Hat Black velvet mortar-board with gold netted button and black tassel

Pro-Vice-Chancellors

Robe Green silk damask, trimmed with one-inch gold oak-leaf lace on fronts, cape and bottom of hanging sleeves with one-and-a-half-inch gold oak-leaf lace on wings and sleeve cuts

Hat Black velvet mortar-board with black tassel

Registrar

Robe Green silk damask

Hat Black velvet mortar-board with black tassel

Mace-Bearer

Robe Black Panama cloth, two-and-a-half-inch facing and sleeve panel bordered with red silk

Hat Doctor’s cloth bonnet with red cord and tassel

Graduates of the University

The gowns, hoods and hats for graduates of the University are based around a reasonably logical faculty colour system. The colours are as you see below:

Degrees Colour
FdA white
BA, BA(QTS), MA, MHist,[3] DLitt claret
BSc, MSc, DSc sorta blue
MMath, MPhys, MChem, MMORSE, MMathStat, MMathPhys royal blue
MASt blue
BEd, MEd, EdD green
LLB, LLM, LLD purple
MPhil, PhD red shot green
BPhil(Ed) light green
MB ChB, MS, MClinSci, MMedEd, MPH, MD red
BMedSci, MMedSci scarlet edged mid-blue
BEng light blue
MEng, EngD navy blue
MBA yellow
MPA purple
MRes[3] turquoise

No dress is specified for holders of undergraduate or postgraduate diplomas or certificates (including the Postgraduate Certificate in Education), or for undergraduates (although see the remark on ushers below).

Gowns

Five types of gowns are worn by graduates of the University:

In addition, although no gown is specified for undergraduates, in recent years non-graduate ushers at ceremonial occasions have taken to wearing a black undergraduate-style gown ([u1] in Groves' system[4]) with red piping around the yoke, identical to that formerly specified for undergraduates of the Victoria University of Manchester.[1]

In the Hood

Hoods of two different shapes are specified for graduates of the University. Bachelors, and holders of foundation degrees and advanced first degrees (MMath, etc.) wear a hood of black corded rayon in simple shape (actually Burgon shape, denoted [s2] in the Groves system[4]) fully lined and bound on the cowl and neckband with taffeta of the appropriate faculty colour.

Holders of graduate degrees wear a hood of a modified Aberdeen shape ([a1] in Groves' system[4]) which the regulations refer to as "special shape". This is fully lined and bound on the cowl and cape with taffeta of the relevant faculty colour. In the case of masters (including Masters of Philosophy) the shell is of black corded rayon, for Doctors of Philosophy the shell is of maroon cloth, for Doctors of Engineering, Education and Medicine the shell is of crimson cloth, and for higher doctors (Doctors of Science, of Letters and of Law) the shell is of red cloth.

The hood for Doctors of Clinical Psychology is, according to the Calendar,[2] of black corded rayon, fully lined with royal blue and scarlet taffeta, but in practice the hood supplied and actually worn is scarlet lined (but not bound) with royal blue taffeta.[1]

Upon its introduction in 1985, the hood for the degree of Master of Engineering was in Aberdeen shape (as for the other master's degrees) however this was changed to Burgon shape in 1997 to bring it into line with the new four-year first degrees (MMath, etc.).[1]

Headwear

Two types of hat are worn by graduates of the University:

References

  1. 1 2 3 4 Jackson, Nicholas (2008). "The Development of Academic Dress in the University of Warwick". Transactions of the Burgon Society. 8: 10–59.
  2. 1 2 University of Warwick Calendar, Section 4.5: Academic Dress
  3. 1 2 Degree no longer awarded.
  4. 1 2 3 4 5 6 7 Groves, Nicholas (2001). "Towards a Standard Terminology for Describing Academic Dress". Burgon Society Annual. 1: 9–12.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.