16"/45 caliber gun
16"/45 caliber Mark 1, 5, and 8 | |
---|---|
USS Colorado (BB-45), steams through rough seas, circa 1932, with her 16"/45 caliber gun turrets aimed to starboard. | |
Type | Naval gun |
Place of origin | United States |
Service history | |
In service | 1921–1947 |
Used by | United States Navy |
Wars | World War II |
Production history | |
Designer | Bureau of Ordnance |
Designed |
|
Manufacturer | |
Produced | 1914–1920 |
No. built |
|
Variants | Marks 1, 5, and 8 |
Specifications | |
Weight |
|
Length | 736 in (18.7 m) |
Barrel length | 720 in (18 m) bore (35 calibers) |
| |
Shell |
|
Caliber | 16 inches (406 mm) |
Elevation | -4° to +30° |
Traverse | 300° max/280° min |
Rate of fire | 1.5 round per minute |
Muzzle velocity |
|
Effective firing range |
|
Maximum firing range |
|
The 16"/45 caliber gun (spoken "sixteen-inch-forty-five-caliber") was used for the primary batteries of the last class of Standard-type battleships for the United States Navy, the Colorado-class. These guns promised twice the muzzle energy over the Mark 7 12-inch/50 caliber guns of the Wyoming-class battleship and a 50% increase over the 14-inch/45 caliber guns of the New York-class, Nevada-class, and Pennsylvania-class battleships.[1]
Design
The 16-inch gun was a built-up gun constructed in a length of 45 caliber. The Mark 1 had an A tube, jacket, liner, and seven hoops, four locking rings and a screw-box liner. When the gun was designed in August 1913 it was referred to as the "Type Gun (45 Cal.)" as an effort to conceal the guns true size of 16 inches. Gun No. 1, the prototype, was proof fired in July 1914, less than a year after it was designed. After some minor changes the gun was re-proved in May 1916 with production approved in January 1917, for Gun Nos. 2–41. Bethlehem Steel was given a contract for 20 guns and an additional 20 castings were ordered from Watervliet Arsenal for assembly at the US Naval Gun Factory at the Washington Navy Yard.[1][2]
The Mark 1 guns were upgraded to Marks 5 and 8 in the late 1930s. The Mark 5's have a larger chamber to permit larger charges and a new liner with a heavier taper carbon steel along with a liner locking ring and locking collar. The Mark 8, similar to the Mark 5, had a uniform rifling with a chromium plated bore for increased life.[1][3]
Naval service
Ship | Gun Installed | Gun Mount |
---|---|---|
USS Colorado (BB-45) | Guns: 16"/45 caliber | Turrets: 4 × Two-gun turrets |
USS Maryland (BB-46) | Guns: 16"/45 caliber | Turrets: 4 × Two-gun turrets |
USS Washington (BB-47) (cancelled 1922) | Guns: 16"/45 caliber | Turrets: 4 × Two-gun turrets |
USS West Virginia (BB-48) | Guns: 16"/45 caliber | Turrets: 4 × Two-gun turrets |
See also
Weapons of comparable role, performance and era
- BL 16 inch Mk I naval gun : British equivalent
- 41 cm/45 3rd Year Type naval gun : Japanese equivalent
References
- ↑ Friedman, Norman (2011). Naval Weapons of World War One. Seaforth Publishing. pp. 157–158. ISBN 978 1 84832 100 7.