1,1,1,2-Tetrafluoroethane

1,1,1,2-Tetrafluoroethane
Names
IUPAC name
1,1,1,2-Tetrafluoroethane
Other names
Freon 134a
Dymel 134a
Forane 134a
Genetron 134a
HFA-134a
HFC-134a
R-134a
Suva 134a
Norflurane
Identifiers
3D model (JSmol)
ChemSpider
ECHA InfoCard 100.011.252
EC Number 212-377-0
KEGG
RTECS number KI8842500
UNII
Properties
CH2FCF3 [1]
Molar mass 102.03 g/mol
Appearance Colorless gas
Density 0.00425 g/cm3, gas
Melting point −103.3 °C (−153.9 °F; 169.8 K)
Boiling point −26.3 °C (−15.3 °F; 246.8 K)
0.15 wt%
Hazards
Main hazards Asphyxiant
Safety data sheet See: data page
S-phrases (outdated) (S2), S23, S24/25, S51
NFPA 704
Flammability code 0: Will not burn. E.g., water Health code 1: Exposure would cause irritation but only minor residual injury. E.g., turpentine Reactivity code 1: Normally stable, but can become unstable at elevated temperatures and pressures. E.g., calcium Special hazards (white): no codeNFPA 704 four-colored diamond
0
1
1
Flash point 250 °C (482 °F; 523 K)
Related compounds
Related refrigerants
Difluoromethane
Pentafluoroethane
Related compounds
2-Chloro-
1,1,1,2-tetrafluoroethane

1,1,1-Trichloroethane
Supplementary data page
Refractive index (n),
Dielectric constantr), etc.
Thermodynamic
data
Phase behaviour
solidliquidgas
UV, IR, NMR, MS
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
YesY verify (what is YesYN ?)
Infobox references

1,1,1,2-tetrafluoroethane, R-134a, Freon 134a, Forane 134a, Genetron 134a, Florasol 134a, Suva 134a or HFC-134a, also known as norflurane (INN), is a haloalkane refrigerant with thermodynamic properties similar to R-12 (dichlorodifluoromethane) but with insignificant ozone depletion potential and a somewhat lower global warming potential (1,430, compared to R-12's GWP of 10,900).[2] It has the formula CH2FCF3 and a boiling point of −26.3 °C (−15.34 °F) at atmospheric pressure. R-134a cylinders are colored light blue.[3] Attempts at phasing out its use as a refrigerant with substances that have lower global warming potentials, such as HFO-1234yf are underway.

Uses

1,1,1,2-Tetrafluoroethane is a non-flammable gas used primarily as a "high-temperature" refrigerant for domestic refrigeration and automobile air conditioners. These devices began using 1,1,1,2-tetrafluoroethane in the early 1990s as a replacement for the more environmentally harmful R-12 and retrofit kits are available to convert units that were originally R-12-equipped. Other uses include plastic foam blowing, as a cleaning solvent, a propellant for the delivery of pharmaceuticals (e.g. bronchodilators), wine cork removers, gas dusters, such as Dust-Off, and in air driers for removing the moisture from compressed air. 1,1,1,2-Tetrafluoroethane has also been used to cool computers in some overclocking attempts. It is the refrigerant used in plumbing pipe freeze kits. It is also commonly used as a propellant for airsoft airguns. The gas is often mixed with a silicon-based lubricant.

Tetrafluoroethane, when compressed as inside gas duster cans, is a clear liquid which boils when exposed to atmospheric pressure at room temperature (as seen here) and can be extracted from common "canned air" canisters by simply inverting them during use.

1,1,1,2-tetrafluoroethane is also being considered as an organic solvent suitable for extraction of flavor and fragrance compounds, as a possible alternative to other organic solvents and supercritical carbon dioxide.[4][5] It can also be used as a solvent in organic chemistry, both in liquid and supercritical fluid.[6] It is used in the resistive plate chamber particle detectors in the Large Hadron Collider.[7][8] It is also used for other types of particle detectors, e.g. some cryogenic particle detectors.[9] It can be used as an alternative to sulfur hexafluoride in magnesium smelting as a shielding gas.[10]

1,1,1,2-tetrafluoroethane is also being considered as an alternative to sulfur hexafluoride as a dielectric gas.[11] Its arc-quenching properties are poor, but its dielectric properties are fairly good.

Climate change considerations

Recently, 1,1,1,2-tetrafluoroethane has been subject to use restrictions due to its contribution to climate change.[12] It has a global warming potential of 1300.[13]

The Society of Automotive Engineers (SAE) has proposed 1,1,1,2-tetrafluoroethane (HFC-134a) to be best replaced by a new fluorochemical refrigerant HFO-1234yf (CF3CF=CH2) in automobile air-conditioning systems.[14] California may also prohibit the sale of canned 1,1,1,2-tetrafluoroethane to individuals to avoid non-professional recharge of air conditioners.[15] A ban had been in place in Wisconsin since October 1994 under ATCP 136 prohibiting sales of container sizes holding less than 15 lbs of 1,1,1,2-tetrafluoroethane, but this restriction applies only when the chemical is intended to be a refrigerant. The ban has been lifted in Wisconsin in 2012.[16] It appears, for example, that it is legal for a person to purchase gas duster containers with any amount of the chemical because in that instance the chemical is neither intended to be a refrigerant [16] nor is HFC-134a included in the § 7671a listing of class I and class II substances.[17]

History

1,1,1,2-Tetrafluoroethane first appeared in the early 1990s as a replacement for dichlorodifluoromethane (R-12), which has ozone depleting properties.[18] 1,1,1,2-Tetrafluoroethane has been atmospherically modeled for its impact on depleting ozone and as a contributor to global warming. Research suggests that over the past 10 years the concentration of 1,1,1,2-tetrafluoroethane has increased significantly in the Earth's atmosphere, with a recent study revealing a doubling in atmospheric concentration between 2001 and 2004.[19] It has insignificant ozone depletion potential (ozone layer), significant global warming potential (100-yr GWP = 1430)[20] and negligible acidification potential (acid rain). Because of its high GWP, 1,1,1,2-tetrafluoroethane has been banned from use in the European Union, starting with cars in 2011 and phasing out completely by 2017.[21]

Production

Tetrafluoroethane is typically made by reacting trichloroethylene with hydrogen fluoride. CHCl =CCl2 + 4HF → CH2FCF3 + 3HCl [22]

Safety

Mixtures with air of the gas 1,1,1,2-tetrafluoroethane are not flammable at atmospheric pressure and temperatures up to 100 °C (212 °F). However, mixtures with high concentrations of air at elevated pressure and/or temperature can be ignited.[23] Contact of 1,1,1,2-tetrafluoroethane with flames or hot surfaces in excess of 250 °C (482 °F) may cause vapor decomposition and the emission of toxic gases including hydrogen fluoride and carbonyl halides.[24] 1,1,1,2-Tetrafluoroethane itself has an LD50 of 1,500 g/m3 in rats, making it relatively non-toxic, apart from the dangers inherent to inhalant abuse. Its gaseous form is denser than air and will displace air in the lungs. This can result in asphyxiation if excessively inhaled.[25][26] This is what contributes to most deaths by inhalant abuse.

Aerosol cans containing 1,1,1,2-tetrafluoroethane, when inverted, become effective freeze sprays. Under pressure, 1,1,1,2-tetrafluoroethane is compressed into a liquid, which upon vaporization absorbs a significant amount of thermal energy. As a result, it will greatly lower the temperature of any object it contacts as it evaporates. This can result in frostbite when it contacts skin, as well as blindness upon eye contact.

Use in inhalers

1,1,1,2-tetrafluoroethane and HFA227ea are propellants of pressurised metered dose inhalers (pMDI) used by asthmatics.

This chemical is an inhalational anaesthetic studied only in animals in 1967,[27] and toxicology investigations did not acknowledge this fact. All hydrofluorocarbon inhaled anaesthetic agents have smooth muscle relaxing properties, so the propellant gas produced by pMDIs using HFA134a and HFA227ea (which has no anaesthetic activity) will add to beta2-agonist bronchodilating drugs from that inhaler.

The change from inert chlorofluorocarbon / Freon propellant to HFAs occurred in the late 1990s, and coincided with the fact that "Asthmatic athletes have consistently outperformed healthy athletes in every Olympic games since 2000".[28]

See also

References

  1. Global Warming Potentials of ODS Substitutes Ozone Layer Protection US EPA. Epa.gov (2006-06-28). Retrieved on 2011-08-21.
  2. "Table 2.14 (Errata). Lifetimes, radiative efficiencies and direct (except for CH4) GWPs relative to CO2.". Retrieved 2017-07-11.
  3. Example image of a 30 lbs R134a bottle
  4. Corr, Stuart (2005). "1,1,1,2-Tetrafluoroethane (R-134a): A Selective Solvent for the Generation of Flavor and Fragrance Ingredients". Natural Flavors and Fragrances. ACS Symposium Series. 908. p. 41. ISBN 0-8412-3904-5. doi:10.1021/bk-2005-0908.ch003.
  5. Abbott, Andrew P.; Eltringham, Wayne; Hope, Eric G.; Nicola, Mazin (2005). "Solubility of unsaturated carboxylic acids in supercritical 1,1,1,2-tetrafluoroethane (HFC 134a) and a methodology for the separation of ternary mixtures". Green Chemistry. 7 (4): 210. doi:10.1039/B412697A.
  6. Abbott, Andrew P.; Eltringham, Wayne; Hope, Eric G.; Nicola, Mazin (2005). "Hydrogenation in supercritical 1,1,1,2 tetrafluoroethane (HFC 134a)". Green Chemistry. 7 (10): 721. doi:10.1039/B507554H.
  7. Anushree Ghosh STUDY OF GLASS RESISTIVE PLATE CHAMBERS (RPC) AND CALCULATION OF EFFICIENCY. INO Graduate Training Programme DHEP, TIFR, Mumbai.
  8. M. Capeans, I. Glushkov, R. Guida, F. Hahn, S. Haider (CERN, Switzerland) RPC operation at the LHC experiments in an optimized closed loop gas system. Medical Imaging Conference. 25–31 October 2009.
  9. Norbeck, E.; Olson, J. E.; Moeller, A.; Onel, Y. (2006). "Rad Hard Active Media For Calorimeters" (pdf). AIP Conference Proceedings. 867: 84. Bibcode:2006AIPC..867...84N. doi:10.1063/1.2396941.
  10. Magnesium recycling in the United States in 1998. (PDF) . USGS. Retrieved on 2011-08-21.
  11. Gaseous dielectrics with low global warming potentials – US Patent Application 20080135817 Description. Patentstorm.us (2006-12-12). Retrieved on 2011-08-21.
  12. European Directive 2006/40/EC relating to emissions from air-conditioning systems in motor vehicles. (PDF) . Retrieved on 2011-08-21.
  13. Compressed air dusters and environmental concerns. (PDF). Retrieved on 2015-05-26.
  14. HFO-1234yf A Low GWP Refrigerant For MAC. Refrigerants.dupont.com (2011-08-17). Retrieved on 2011-08-21.
  15. California restricts use of HFC-134a in cars. 27 June 2007. R744.com. Retrieved on 2011-08-21.
  16. 1 2 Chapter ATCP 136. MOBILE AIR CONDITIONERS; RECLAIMING OR RECYCLING REFRIGERANT. State.wi.us. (PDF) . Retrieved on 2011-08-21.
  17. Class I Ozone-depleting Substances. EPA.gov. Retrieved on 2011-08-21.
  18. Franklin J (1993). "The Atmospheric Degradation and Impact of 1,1,1,2-Tetrafluorethane (Hydrofluorocarbon 134a)". Chemosphere. 27 (8): 1565–1601. doi:10.1016/0045-6535(93)90251-Y.
  19. "Greenhouse gas monitoring at the Zeppelin station – Annual report 2004 (TA-2110/2005)" (PDF). Norwegian Institute for Air Research. Retrieved 2006-01-19.
  20. Forster, P.; et al. (2007). "Changes in Atmospheric Constituents and in Radiative Forcing." (pdf). Climate Change 2007: The Physical Science Basis. Contribution of Working Group I to the Fourth Assessment Report of the Intergovernmental Panel on Climate Change. Archived (PDF) from the original on 24 July 2010.
  21. "Refrigerant 1234YF's Potential Impact in Automotive Applications" (PDF). Archived (PDF) from the original on 13 July 2013. Retrieved 2013-07-10.
  22. http://www.solvay.us/en/binaries/PSS-Tetrafluoroethane-164368.pdf
  23. DuPont (2004). DuPont HFC-134a— Properties, Uses, Storage, and Handling (PDF) (Report). Retrieved 5 August 2016.
  24. Honeywell International (December 2005). "MSDS # GTRN-0047 For Genetron 134aUV".
  25. Alexander D. J; Libretto S. E. (1995). "An overview of the toxicology of HFA-134a (1,1,1,2-tetrafluoroethane)". Hum. Exp. Toxicol. 14 (9): 715–20. PMID 8579881. doi:10.1177/096032719501400903.
  26. G. E. Millward; E. Tschuikow-Roux (1972). "Kinetic analysis of the shock wave decomposition of 1,1,1,2-tetrafluoroethane". The Journal of Physical Chemistry. 76 (3): 292–298. doi:10.1021/j100647a002.
  27. Shulman M, Sadove MS (1967). "1, 1, 1, 2-tetrafluoroethane: an inhalational agent of intermediate potency". Anesthesia and Analgesia. 46: 629–635.
  28. Mckenzie DC, Fitch KD (2011). "The asthmatic athlete:inhaled beta-2 agonists, sport performance, and doping". Clin J Sport Med. 21: 46–50. PMID 21200170.
Wikimedia Commons has media related to Tetrafluoroethane.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.