World War I Victory Medal (United States)

World War I Victory Medal
World War I Victory Medal
Awarded by Department of the Army Department of the Navy
Type	Service medal
Eligibility	served in the armed forces between the following dates, in the following locations: 6 April 1917 to 11 November 1918 for any military service. 12 November 1918, to 5 August 1919 for service in European Russia 23 November 1918, to 1 April 1920 for service with the American Expeditionary Force Siberia
Status	Inactive
Statistics
Established	by an Act of Congress, 1919, and promulgated by War Department General Order 48, 1919, which was rescinded by War Department General Order 83, 30 June 1919. [1]
First awarded	April 1921 (retroactive)[1]

A photo showing the state of a U.S. Victory Medal in 2012.

The World War I Victory Medal is a service medal of the United States military which was first created in 1919, designed by James Earle Fraser. The medal was originally intended to be created due to an act of the United States Congress, however the bill authorizing the medal never passed, leaving the service departments to create the award through general orders. The United States Army published orders authorizing the World War I Victory Medal in April 1919 and the U.S. Navy followed in June of that same year.^{[1] [1]}

^[2]

Criteria

Known until 1947 simply as the “Victory Medal”, the World War I Victory Medal was awarded to any member of the U.S. military who had served in the armed forces between the following dates in the following locations:^[3]

• 6 April 1917 to 11 November 1918 for any military service.
• 12 November 1918, to 5 August 1919 for service in European Russia
• 23 November 1918, to 1 April 1920 for service with the American Expeditionary Force Siberia

Design

The front of the bronze medal features a winged Victory holding a shield and sword on the front. The back of the bronze medal features "The Great War For Civilization" in all capital letters curved along the top of the medal. Curved along the bottom of the back of the medal are six stars, three on either side of the center column of seven staffs wrapped in a cord. The top of the staff has a round ball on top and is winged on the side. The staff is on top of a shield that says "U" on the left side of the staff and "S" on the right side of the staff. On left side of the staff it lists one World War I Allied country per line: France, Italy, Serbia, Japan, Montenegro, Russia, and Greece. On the right side of the staff the Allied country names read: Great Britain, Belgium, Brazil, Portugal, Rumania (spelled with a U instead of an O as it is spelled now), and China.

Devices

To denote battle participation and campaign credit, the World War I Victory Medal was authorized with a large variety of devices to denote specific accomplishments. In order of seniority, the devices authorized to the World War I Victory Medal were as follows:

Silver Citation Star

The 3/16 inch Silver Citation Star to the World War I Victory Medal was authorized by the United States Congress on 4 February 1919. A silver star was authorized to be worn on the ribbon of the Victory Medal for any member of the U.S. Army who had been cited for gallantry in action between 1917 and 1920. In 1932, the Silver Citation Star was redesigned and renamed the Silver Star and, upon application to the United States War Department, any holder of the Silver Citation Star could have it converted to a Silver Star decoration.

Navy Commendation Star

The 3/16 inch Navy Commendation Star was authorized to any person who had been commended by the Secretary of the Navy for performance of duty during the First World War. The Navy Commendation Star was worn as a silver star on the World War I Victory Medal, identical in appearance to the Army’s Silver Citation Star. Unlike the Army’s version, however, the Navy Commendation Star could not be upgraded to the Silver Star medal.^[2][4]

Army Battle Clasps

The following battle clasps, inscribed with a battle's name, were worn on the medal to denote participation in major ground conflicts.^[1]

For general defense service, not involving a specific battle, the "Defensive Sector" Battle Clasp was authorized. The clasp was also awarded for any battle which was not already recognized by its own battle clasp.

The World War I Victory Medal bears the clasps of the battles the U.S. Army participated in across the ribbon. Not all battles are shown on the bar clasps. Only the battles designated as battles that would have bars issued were shown on the medal. The famous Battle of Chateau Thierry to hold the Chateau and the bridge as a joint effort between the US Army and the US Marines against the German machine gunners did not get awarded clasps.

Navy Battle Clasps

Navy battle clasps were issued for naval service in support of Army operations and had identical names to the Army battle clasps. There was a slight variation of the criteria dates for the Navy battle clasps, as listed below.^[2]

The Defensive Sector Clasp was also authorized for Navy personnel who had participated in naval combat but were not authorized a particular battle clasp.

Defensive Sector Clasp on Ribbon

Navy Operational Clasps

For sea-related war duty, the Navy issued the following operational clasps, which were worn on the World War I Victory Medal and inscribed with the name of the duty type which had been performed:^[2]

Unlike the army, the navy only allowed one clasp of any type to be worn on the ribbon. Members of the marine or medical corps who served in France but was not eligible for a battle clasp would receive a bronze Maltese cross on their ribbons.^[2]

Army Service Clasps

For non-combat service with the army during the First World War, the following service clasps were authorized to be worn with the World War I Victory Medal. Each service claps was inscribed with a country or region name where support service was performed. The U.S. Army issued the following service clasps:^[1]

Navy Service Clasps

The U.S. Navy issued similar service clasps to the Army for service in the following regions during the following periods:^[2]

Campaign Stars

Since battle and service clasps could only be worn on the full-sized World War I Victory Medal, 3/16 inch bronze service stars were authorized for wear on the award ribbon. This was the common method of campaign and battle display when wearing the World War I Victory Medal as a ribbon on a military uniform.

Maltese Cross device on U.S. WWI Victory Medal

Maltese Cross

Medals issued to U.S. Marines were issued with a Maltese cross device affixed to the ribbon.

Distribution

The World War I Victory Medals were awarded after the end of World War I, so they were mailed to the servicemen instead of awarded in person. For example, the boxes containing the Victory Medals for United States Army World War I veterans were mailed out by the depot officer at the General Supply Depot, U.S. Army, in Philadelphia, Pennsylvania, in April 1921. An outer light brown box with an address label glued to it and its postage area marked "OFFICIAL BUSINESS, Penalty for private use $300" contained an inner white box stamped with the bars the serviceman was supposed to receive on his medal. The inner white box contained the medal, which was wrapped in tissue paper.

Only after filling out the application form A.G.O. No. 740 with the help of an authorized officer could it be officially forwarded to the Philadelphia Quartermaster Intermediate Depot for the veteran then to receive his medal by mail. The Army's started issuing Victory Medals on June 21, 1920 not April 1921 as listed above, The Navy had a late start due to production issues and started in August of 1920.^[5]

Name change

In 1945, the “Victory Ribbon” was created as an award for those who served in World War II. Between 1945 and 1947, the World War I award continued to be known by its original name, the “Victory Medal,” and the World War II award was known as the “Victory Ribbon.” In 1947, the Victory Ribbon became a full-sized medal as the World War II Victory Medal, at which point the World War I Victory Medal adopted its current name. However, some military records as late as the 1950s continued to annotate the World War I decoration by its previous name, and the medal was often referred to as “Victory Medal (WWI)”.

An International Award

Not only did the United States issue a Victory Medal, but so did a significant number of Allied and associated countries involved in the conflict against the Dual Alliance between Austria and Germany.

The proposition of such a common award was first made by French Maréchal Ferdinand Foch who was supreme commander of the Allied Forces during the First World War. Each medal in bronze has the same diameter (36 mm) and ribbon (double rainbow), but with a national design representing a winged victory.1^{[lower-alpha 1]}

(Main source : ‘’The Interallied Victory Medals of World War I’’ by Alexander J. Laslo, Dorado Publishing, Albuquerque. 1986 Edition )

See also

• Army of Occupation of Germany Medal
• Awards and decorations of the United States military
• Médaille Interalliée 1914–1918
• Silver Citation Star
• Victory Medal (United Kingdom)
• World War II Victory Medal (United States)

Notes

References

Wikimedia Commons has media related to World War I Victory Medal (United States).

Inter-Allied Victory Medal of World War I by country Belgium Brazil British Empire Cuba Czechoslovakia France Greece Italy Japan Poland Portugal Romania Siam (Thailand) South Africa United States of America