Western concert flute

This article is about the Western concert flute and its predecessors such as the wooden traverso. For other types of flute, see flute.
Flute
Other names Transverse flute, Boehm flute, C flute
Classification

Hornbostel–Sachs classification 421.121.12
(open side-blown flute with fingerholes)
Playing range

(B3) C4–C7 (F7)
Related instruments

The Western concert flute is a transverse (side-blown) woodwind instrument made of metal or wood. It is the most common variant of the flute. A musician who plays the flute is called a flautist, flutist, flute player, or fluter.

This type of flute is used in many ensembles including concert bands, military bands, marching bands, orchestras, flute ensembles, and occasionally jazz bands and big bands. Other flutes in this family include the piccolo, alto flute, bass flute, contrabass flute, double contrabass flute and the hyperbass flute. A large repertory of works has been composed for flute.

History

See also: flute

The flute is one of the oldest and most widely used wind instruments. The precursors of the modern concert flute were keyless wooden transverse flutes, similar to modern fifes. These were later modified to include between one and eight keys for chromatic notes.

Predecessors of the Western concert flute

A modern copy of an 18th-century French traverso, by flute-maker Boaz Berney
Partita for solo flute (BWV 1013) by Johann Sebastian Bach performed on a 18th century traverso by Alex Murray
1. Allemande

2. Courante

3. Sarabande

4. Bourrée

Problems playing these files? See media help.

The most common pitch for keyless wooden traverse flutes is "six-finger" D. Keyless traverse flutes continue to be used in folk music (particularly Irish traditional music) and in historically informed performances of Baroque (and earlier) music.

Medieval flutes (1000–1400)

Throughout the 11th, 12th and 13th centuries, transverse flutes were very uncommon in Europe, with the recorder being more prominent. The transverse flute arrived in Europe from Asia, via the Byzantine Empire, where it migrated to Germany and France. These flutes became known as "German flutes", to distinguish them from others, such as the recorder.[1] The flute became used in court music, along with the viol, and was used in secular music, although only in France and Germany. It would not spread to the rest of Europe for nearly a century. The first literary appearance of the transverse flute was made in 1285, by Adenet le Roi in a list of instruments he played. After this, a period of 70 years ensues, where there are few references to the flute.

Renaissance (1400–1600) and Baroque flutes (1600–1760)

Beginning in the 1470s, a military revival in Europe led to a revival in the flute. The Swiss army used flutes for signaling, and this helped the flute spread to all of Europe.[2] In the late 16th century, flutes began to be used in court and theatre music (predecessors of the orchestra), and the first flute solos. Following the 16th century court music, flutes began appearing in chamber ensembles. These flutes were often used as the tenor voice. However, flutes varied greatly in size and range. This made transposition necessary, which led flutists to use Guidonian hexachords (used by singers and other musicians since their introduction in the 11th century) to transpose music more easily.[3]

During the 16th and early 17th centuries in Europe, the transverse flute was available in several different sizes, in effect forming a consort much in the same way that recorders and other instrument families were used in consorts. At this stage, the transverse flute was usually made in one section (or two for the larger sizes) and had a cylindrical bore. As a result, this flute had a rather soft sound and limited range, and was used primarily in compositions for the "soft consort".

During the Baroque period, the transverse flute was redesigned. Now often called the traverso (from the Italian), it was made in three or four sections, or joints, with a conical bore from the head joint down. The conical bore design gave the instrument a wider range and a more penetrating sound, without sacrificing the softer, expressive qualities of the instrument. In addition to chamber music, the traverso began to be used in orchestral music.

In the Baroque era, flutes become used in the scores of opera, ballet and chamber music. With this, composers now wrote music for the flute. These included Praetorius, Schütz, Rebillé and Descoteaux, Quantz, Bach, Telemann, Blavet, Vivaldi and Handel.

Because of the works of such composers, the flute became popular as a solo instrument. However there were few professional flutists who had the instrument as their main instrument (many had oboe as their main instrument). In 1707, Jacques Martin Hotteterre wrote the first method book on playing the flute: Principes de la flûte traversière. The 1730s brought an increase in operatic and chamber music feature of flutes. The end of this era found the publication of Essay of a Method of Playing the Transverse Flute by Quantz, considered the greatest exposition on flute method of its time.

Classical to early Romantic era (c.1860 to the mid 19th century)

The orchestras formed in the last half of the 18th century included flutes, which were featured in symphonies and concertos. Throughout the rest of the century the interest in flutes increased, and peaked in the early half of the 19th century. Around this time Friedrich DĂĽlon was one of the best known flutists. The early 19th century saw a great variety in flute designs. Conical bores giving a penetrating sound were used in Vienna, English flutes had a range to low C and played best in flat keys, French flutes gave a softer tone, and German flutes blended best with orchestras. With the romantic era, flutes began to lose favor: Symphony orchestras rather featured brass and strings.

Western concert flute

A 1911 illustration of a Western Classical Flute
Partita for solo flute (BWV 1013) by Johann Sebastian Bach performed on a modern flute by Scott Goff
1. Allemande

2. Courante

3. Sarabande

4. Bourrée

Problems playing these files? See media help.

In the nineteenth century Theobald Boehm began to make flutes. Keys were added to the flute, and the taper was changed to strengthen its lower register.[4]

Initially Boehm’s new flute design was not very well accepted, but flutes grew more popular throughout Europe as the century wore on. By the end of the century the Boehm flute had won favor and a flute revival was spurred by composers like Debussy.

With the ability to record sound (beginning in the 1890s), flutes began to regain a popularity not seen since the classical era. Recordings of flute music became increasingly common, with professional flautists spending a great deal of time recording music. The 20th century brought the first recordings of Baroque music on modern flutes.

Boehm flute

Main article: Boehm system

The dimensions and key system of the modern western concert flute and its close relatives are almost completely the work of the great flautist, composer, acoustician and silversmith, Theobald Boehm, who patented his system in 1847. It was immediately popular, and spread worldwide in just a few years. Minor additions to and variations on his key system are common but the acoustical structure of the tube remains almost exactly as he designed it. Major innovations were the change to metal instead of wood, large straight tube bore, "parabolic" tapered headjoint bore, very large tone holes covered by keys, and the linked key system which simplified fingering somewhat. The most substantial departures from Boehm's original description are the universal elimination of the "crutch" for the left hand, the almost universal adoption of Briccialdi's thumb key mechanism instead of Boehm's, and the almost universal adoption of a closed-standing G♯ key over an additional G♯ tone hole.[5] Boehm's key system, with minor variations, continues to be regarded as the most effective system of any modern woodwind, allowing trained players to perform with facility in all keys and with extraordinary velocity and brilliance. The modern flute has three octaves plus C7-C♯7-D7 in the fourth octave. Many modern composers used the high D♯7; while such extremes are not commonly used, the modern flute can perform up to an F♯7 in its fourth octave.

Variant flute designs of the second half of the 19th century

An early keyed HF Meyer all-wood construction flute in case

The Meyer flute was a popular flute in the mid 19th century. Including and derived from the instruments built by H.F. Meyer from 1850 to the late 1890s, it could have up to 12 keys and was built with head joints of either metal-lined ivory or wood. The final form was a combination of a traditional keyed flute and the Viennese flute, and became the most common throughout Europe and America. This form had 12 keys, body of wood, head joint of metal and ivory, and was common at the end of the century.[6]

Quite at the opposite end of the spectrum, in terms of the complexity of the key system developed by Boehm, was the Giorgi flute, an advanced form of the ancient holed flute. Patented in 1897, the Giorgi flute was designed without any mechanical keys, though the patent allows for the addition of keys as options. Giorgi enabled the performer to play equally true in all musical keys, as does the Boehm system. Giorgi flutes are now rarities, found in museums and private collections. The underlying principles of both flute patterns are virtually identical, with tone holes spaced as required to produce a fully chromatic scale. The player, by opening and closing holes, adjusts the effective length of the tube, and thus the rate of oscillation, which defines the audible pitch.

Modified Boehm flute designs

In the 1950s, Albert Cooper modified the Boehm flute to make playing modern music easier. The flute was tuned to A440, and the embouchure hole was cut in a new way to change the timbre of the flute. These flutes became the most used flutes by professionals and by amateurs.[7]

In the 1980s, Johan Brögger modified the Boehm flute by fixing two major problems that had existed for nearly 150 years: maladjustument between certain keys, and problems between the G and B♭ keys. The result was non-rotating shafts, which gave a quieter sound and less friction on moving parts. Also the modifications allowed for springs to be adjusted individually, and the flute was strengthened. The Brögger flute is only made by the Brannen Brothers[8] and Miyazawa Flutes.[9]

Characteristics of the Western concert flute

A flute player playing a Western concert flute

The flute is a transverse (or side-blown) woodwind instrument that is closed at the blown end. The instrument is played by blowing a stream of air over the embouchure hole. The pitch is changed by opening or closing keys that cover circular tone holes (there are typically 16 tone holes). Opening and closing the holes produces higher and lower pitches. The direction and intensity of the air stream also affects the pitch, timbre, and dynamics.

The piccolo is also commonly used in Western orchestras and bands. Alto flutes, pitched a fourth below the standard flute, and bass flutes, an octave below, are also used occasionally.

Standard Western concert flute

(B3) C4–C7 (F7)
(B3) C4–C7 (F7-C8)

The standard concert flute, also called C flute, Boehm flute, silver flute, or simply flute, is pitched in C and has a range of about three and a half octaves starting from the musical note C4 (middle C). In most cases the flute's highest pitch is C7, however more experienced flautists are able to reach up to F7 (and in some cases C8). Modern flutes may have a longer foot joint (a B-foot), with an extra key to reach B3.

Other Western concert flute formats

From high to low, the members of the concert flute family include:

Each of the above instruments has its own range. The piccolo reads music in C like the concert flute but sounds one octave higher. The alto flute is in the key of G, and extends the low register range of the flute to the G below middle C. Its highest note is a high G (4 ledger lines above the treble clef staff). The bass flute is an octave lower than the concert flute, and the contrabass flute is an octave lower than the bass flute.

Less commonly seen flutes include the treble flute in G, pitched one octave higher than the alto flute; the soprano flute, between the treble and concert; and the tenor flute or flĂ»te d'amour in Bâ™­ or A, pitched between the concert and alto.

The lowest sizes (larger than the bass flute) have all been developed in the 20th century; these include the sub-bass flute, which is pitched in F, between the bass and contrabass; the subcontrabass flute (pitched in G or C), the contra-alto flute (pitched in G, one octave below the alto), and the double contrabass flute in C, one octave lower than the contrabass. The flute sizes other than the concert flute and piccolo are sometimes called harmony flutes.

Construction and materials

A closed hole "Take-down" Yamaha FL221 flute in case

Concert flutes have three parts: the headjoint, the body, and the foot joint.[10] The headjoint is sealed by a cork (or plug which may be made out of various plastics,or metals or less commonly woods ). It is possible to make fine adjustments to tuning by adjusting the headjoint cork, but usually it is left in the factory-recommended position around 17.3 mm from the centre of the embouchure hole for best scale. Gross, temporary adjustments of pitch are made by moving the headjoint in and out of the headjoint tenon. The player makes fine or rapid adjustments of pitch and timbre by adjusting the embouchure, and/or adjusting the position of the flute in relation to the player, i.e., side and out.

Often, a different head can make the flute play like a different flute. Some flute makers sell both end blown heads and transverse heads that can be interchanged. The same flute body can be used as a whistle/recorder style instrument, or as a transverse flute.

Labelled parts of a French model (open-hole) flute with a B-foot joint.

Head joint shape

The head-joint tube is tapered slightly towards the closed end. Boehm described the shape of the taper as parabolic. Examination of his flutes did not reveal a true parabolic curve, but the taper is more complex than a truncated cone. The head joint is the most difficult part to construct, because the lip plate and tone hole have critical dimensions, edges and angles, which vary slightly both between manufacturers and in individual flutes, especially where they are handmade. Head joint geometry appears particularly critical to acoustic performance and tone,[11] but there is no clear consensus on a particular shape amongst manufacturers. Acoustic impedance of the embouchure hole appears the most critical parameter.[12] Critical variables affecting this acoustic impedance include: chimney length (hole between lip-plate and head tube), chimney diameter, and radiuses or curvature of the ends of the chimney. Generally, the shorter the hole, the more quickly a flute can be played; the longer the hole, the more complex the tone. Finding a particularly good example of a flute is dependent on play testing. Head joint upgrades are usually suggested as a way to improve the tone of an instrument.

Tubing materials

Less expensive flutes are usually constructed of brass, polished and then silver-plated and lacquered to prevent corrosion or silver-plated nickel silver (nickel-bronze bell metal (63%Cu, 29%Zn, 5.5%Ni, 1.25%Ag, 0.75%Pb, alloyed:As, Sb, Fe, Sn)). Flutes that are more expensive are usually made of more precious metals, most commonly solid sterling silver (92.5 % silver), and other alloys including French silver (95%Ag, 5%Cu), "coin silver" (90% silver), or Britannia silver (95.8% silver). It is reported[13] that old Louis Lot French flutes have a particular sound by nature of their specific silver alloy. Gold/silver flutes are even more expensive. They can be either gold on the inside and silver on the outside, or vice versa. All gold and all platinum flutes also exist. Flutes can also be made out of wood, with African blackwood (grenadilla or Dalbergia melanoxylon) being the most common today. Formerly cocuswood was used but this is hard to obtain today.[14] Wooden flutes were far more common before the early 20th century. The silver flute was introduced by Boehm in 1847 but did not become common until later in the 20th century. Wm. S. Haynes, a flute manufacturer in Boston, told Georges Barrère that in 1905 he made one silver flute to every 100 wooden flutes but in the 1930s, he made one wooden flute to every 100 silver flutes.[15]

Unusual tubing materials include glass, carbon fiber, and palladium.[16]

Professionals tend to play more expensive flutes made from more expensive materials. However, the idea that different materials can significantly affect sound quality is under some contention, and some argue that different metals make less difference in sound quality than different flautists playing the same flute.[17] Even Verne Q. Powell, a flute maker, admitted (In Needed: A Gold Flute or a Gold Lip?[18]) that As far as tone is concerned, I contend that 90 percent of it is the man behind the flute.

Most metal flutes are made of alloys that contain significant amounts of copper or silver. These alloys are biostatic because of the oligodynamic effect, and thus suppress growth of unpleasant molds, fungi and bacteria.

Good instruments are designed to prevent or reduce galvanic corrosion between the tube and the key mechanism.

Pad materials

Tone holes are stopped by pads constructed of fish skin (gold-beater's skin) over felt, or in some very low-cost or “ruggedized” flutes, silicone rubber. Accurate shimming of pads on professional instruments to ensure pad sealing is very demanding of technician time. In the time-honored method, pads are seated on paper shims sealed with shellac. A recent development is "precision" pads fitted by a factory-trained technician. Student model flutes are more likely to have pads bedded in thicker materials like wax or hot melt glue. Larger sized closed hole pads are also held in with screws and washers. Synthetic pads appear more water resistant but may be susceptible to mechanical failure (cracking).

Key work

The keys can be made of the same or different metals as the tubing, nickel silver keys with silver tubing, for example. Flute key axles (or "steels") are typically made of drill rod or stainless steel. These mechanisms need periodic disassembly, cleaning, and relubrication, typically performed by a trained technician, for optimal performance. James Phelan, a flute maker and engineer, recommends single-weight motor oil (SAE 20 or 30) as a key lubricant demonstrating superior performance and reduced wear, in preference to commercial key oils).[19]

The keywork is constructed by lost-wax castings and machining, with mounting posts and ribs silver-soldered to the tube. On the best flutes, the castings are forged to increase their strength.

Most flute keys have needle springs, made of phosphor bronze, stainless steel, beryllium copper, or a gold alloy. The B thumb keys typically have flat springs. Phosphor bronze is by far the most common material for needle springs because it is relatively inexpensive, makes a good spring, and is resistant to corrosion. Unfortunately, it is prone to metal fatigue. Stainless steel also makes a good spring and is resistant to corrosion. Gold springs are found mostly in high-end flutes because of its cost.

Mechanical options

Bâ™­ thumb key

The Bâ™­ thumb key (invented and pioneered by Briccialdi) is practically standard today.[20]

Open hole keys versus plateau keys

Open-hole "French model" flutes have circular holes in the centers of five of the keys.[21] These holes are covered by the fingertips when the keys are depressed. Open-hole flutes are frequently chosen by concert-level players, although this preference is less prevalent in Germany, Italy, and Eastern Europe. Students may use temporary plugs to cover the holes in the keys until they can reliably cover the holes with the fingertips. Some players claim that open-hole keys permit louder and clearer sound projection in the flute's lower register.

Open-hole keys are needed for traditional Celtic music and other ethnic styles and for some modern concert pieces which require the player to produce harmonic overtones or to manipulate "breathy" sounds. They can also facilitate alternate fingerings, "extended techniques" such as quarter-tones, glissando, and multiphonics. Closed holes (plateau keys) permit a more relaxed hand position for some players, which can help their playing.

Offset G versus in-line G keys

All of Boehm’s original models had offset G keys, which are mechanically simpler, and permit a more relaxed hand position, especially for younger players or those with small hands. Some players prefer the hand position of the in-line G.[22] For many years, there was a misperception that inline G was for "professional" flutes while offset G was for "student" models, but this stereotype is largely debunked.[23]

Split E

The split E modification makes the third octave E (E6) easier to play for some players. A less expensive option is the "low G insert".

B foot

The B foot extends the range of the flute down one semitone to B3 (the B below middle C).

Gizmo key

Some flutes with a B foot have a "gizmo key": a device that allows closure of the B tone hole independently of the C and C♯ keys. The gizmo key makes C7 easier to play.[24]

Trill keys

The three standard trill keys permit rapid alternation between two notes with disparate standard fingerings: lowest, middle, and highest trill keys ease C-D♯, C-D, and B♭-A, respectively.[25] Some higher notes (third octave B and B♭ and most fourth octave notes) also require use of the two lower trill keys. A fourth so-called C♯ trill key is an increasingly popular option available on many flutes. It is named after one of its uses (to ease the B to C♯ trill) but it also allows some trills and tremolos that are otherwise very difficult, such as high G to high A.[26] Another way of trilling G6-A6 is a dedicated high G-A trill key.[27]

D♯ roller

Some models offer a D♯ roller option (or even an optional pair of parallel rollers on both the D♯ and C♯ keys) which eases motion of the right little finger on, for example, low C to D♯.

Soldered tone holes

Tone-holes may be either drawn (by pulling the tube material outwards) or soldered (cutting a hole in the tube and soldering an extra ring of material on). Soldered tone-holes are thought by some to improve tone but generally cost more.

Scale and pitch

The standard pitch has varied widely over history,[28] and this has affected how flutes are made.[7] Although the standard concert pitch today is A4=440 Hz, many manufacturers optimize the tone hole size/spacings for a higher pitch options such as A4=442 Hz or A4=444 Hz. (As noted above, adjustments to the pitch of one note, usually the A4 fingering, can be made by moving the headjoint in and out of the headjoint tenon, but the point here is that the mechanical relationship of A4 to all other pitches is set when the tone holes are cut. However, small deviations from the objective 'mechanical' pitch (which is related to acoustic impedance of a given fingering) can be made on the fly by embouchure adjustments.)

Flute music

Classical music

An early version of Antonio Vivaldi's La tempesta di mare flute concerto was possibly written around 1713–1716, and would thus have been the first concerto for the instrument, as well as the earliest scoring of a high F6, a problematic note for the Baroque flute of that period.[29]

In jazz and rock

Ian Anderson of Jethro Tull playing a flute

Flutes were rarely used in early jazz. Drummer and bandleader Chick Webb was among the first to use flutes in jazz, beginning in the late 1930s. Frank Wess was among the first noteworthy flautists in jazz, in the 1940s.[30] Since Boehm's fingering is used in saxophones as well as in concert flutes, many flute players "double" on saxophone for jazz and small ensembles and vice versa.

Since 1950, a number of notable performers have used flutes in jazz. Frank Foster and Frank Wess (Basie band), Jerome Richardson (Jones/Lewis big band) and Lew Tabackin (Akiyoshi/Tabackin big band) used flutes in big band contexts. In small band contexts notable performers included Bud Shank, Herbie Mann, Joe Farrell, Rahsaan Roland Kirk, Charles Lloyd, Hubert Laws and Moe Koffman. Several modal jazz and avant-garde jazz performers have utilized the flute including Eric Dolphy, Sam Rivers and James Spaulding.

Jethro Tull is probably the best-known rock group to make regular use of the flute, played by their frontman, Ian Anderson.[31]An alto flute is briefly heard in The Beatles' song "You've Got to Hide Your Love Away", played by John Scott. The Beatles would later feature a flute more prominently in their single "Penny Lane".

Other groups that have used the flute in pop and rock songs include The Moody Blues, Chicago, Australian group Men At Work, the Canadian progressive rock group Harmonium, the Dutch band Focus, and the British groups Traffic, Genesis, Gong (although their flautist/saxophonist, Didier Malherbe, was French) Hawkwind, King Crimson, Camel and Van der Graaf Generator.

See also

Notes

  1. ↑ Powell, Ardal, Dr. "Medieval flutes". FluteHistory.com. Retrieved 15 November 2006.
  2. ↑ Powell, Ardal, Dr. "Military flutes". FluteHistory.com. Retrieved 15 November 2006.
  3. ↑ Powell, Ardal, Dr. "Renaissance flutes". FluteHistory.com. Retrieved 15 November 2006.
  4. ↑ Powell, Ardal, Dr. "Classical flutes". FluteHistory.com. Retrieved 15 November 2006.
  5. ↑ "Dorus G # key".
  6. ↑ Powell, Ardal, Dr. "19th Century flutes". FluteHistory.com. Retrieved 15 November 2006.
  7. 1 2 "The Intonation of the Modern Flute".
  8. ↑ Brögger flutes. Brannenflutes.com. Retrieved 25 February 2011
  9. ↑ Brögger system. Miyazawa.com. Retrieved 25 February 2011
  10. ↑ "How It's Made – Flute".
  11. ↑ Spell, Eldred (1983). "Anatomy of a Headjoint". The Flute Worker. ISSN 0737-8459.
  12. ↑ Wolfe, Joe. "Acoustic impedance of the flute". Flute acoustics: an introduction.
  13. ↑ Louis Lot Analysis. Eldredspellflutes.com. Retrieved 25 February 2011
  14. ↑ "Wooden flutes".
  15. ↑ Goldman, Edwin Franko (1934). Band Betterment. Carl Fischer Inc. New York. p. 33
  16. ↑ Toff, Nancy (1996). The flute book: a complete guide for students and performer. Oxford University Press. p. 20. ISBN 978-0-19-510502-5.
  17. ↑ "SILVER, GOLD, PLATINUM – AND THE SOUND OF THE FLUTE]". Retrieved 25 February 2011. Tests with experienced professional flutists and listeners and one model of a flute made by Muramatsu from 7 different materials showed no evidence that the wall material has any appreciable effect on the sound color or dynamic range of the instrument.
  18. ↑ The Flute Book: Chapter 7; Tone. pp. 89–90. Quote from Dale Higbee article "Needed: A Gold Flute or a Gold Lip", Woodwind World 13 no. 3 (1974): 22.
  19. ↑ Phelan 2001, p.58
  20. ↑ Toff, Nancy (1996). The Flute Book: A Complete Guide for Students and Performers at Google Books, page 56. New York: Oxford University Press US. ISBN 0-19-510502-8.
  21. ↑ "What kind of flute option is best, open or closed hole?".
  22. ↑ "Which is better, Offset or In-Line G?".
  23. ↑ "Inline G vs. Offset G".
  24. ↑ Nancy Toff (1996). The flute book: a complete guide for students and performers. p. 24. ISBN 978-0-19-510502-5.
  25. ↑ "Trill Fingering Chart for Flute and Piccolo".
  26. ↑ Edward Johnson. "The C♯ Trill".
  27. ↑ "Sankyo Flutes, mechanical options".
  28. ↑ "How has the pitch standard evolved?".
  29. ↑ Powell, Ardal. "Vivaldi's Flutes: Federico Maria Sardelli, Vivaldi's Music for Flute and Recorder, trans. by Michael Talbot (Aldershot: Ashgate, 2007)". Early Music 36, no. 1 (February 2008): 120–22.
  30. ↑ Scott Yanow: Frank Wess — Biography (at allmusic.com)
  31. ↑ "Ian Anderson's equipment, flutes".

References

External links

Wikimedia Commons has media related to Western concert flutes.
This article is issued from Wikipedia - version of the Monday, February 15, 2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.