Weld access hole

Weld Access Hole Sketch

The weld access hole or rat hole is a structural engineering technique that allows welding flanges of I-beams and T-beams across their full width and also minimize the induction of thermal stresses with a combination of partially releasing the welded section, avoiding welding the T section where the flange joins the web and improving cooling conditions[1] .[2]

The configuration adopted for web access holes also has an impact on the performance of moment connections due to factors such as stress concentrations[3]

See also

References

  1. ↑ "Ductility, Part 2: Factors That Encourage Ductility". Welding Design & Fabrication. 2007-02-28. Retrieved 2011-06-22.
  2. ↑ "AISC - Engineering FAQs". AISC. Retrieved 2011-06-22.
  3. ↑ Ricles, J.M.; Fisher, J.W. (2002). "Development of improved welded moment connections for earthquake-resistant design". Journal of Constructional Steel Research: 566–604.


This article is issued from Wikipedia - version of the Wednesday, November 26, 2014. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.