Victorian Railways K class

Victorian Railways K class

VR photo of K 103 as built, 1922
Type and origin
Power type steam
Builder VR Newport Workshops
Specifications
Configuration 2-8-0
Gauge 5 ft 3 in (1,600 mm)
Driver diameter 55 in (1,397 mm)
Length 60 feet 3 12 inches (18.38 m)
Axle load 13 long tons 10 cwt (30,200 lb or 13.7 t)
Adhesive weight 53 long tons 2 cwt (118,900 lb or 54 t)
Loco weight 62 long tons 7 cwt (139,700 lb or 63.4 t)
Tender weight 42 long tons 5 cwt (94,600 lb or 42.9 t)
Loco & tender weight 104 long tons 12 cwt (234,300 lb or 106.3 t)
Tender cap 5 long tons 0 cwt (11,200 lb or 5.1 t) coal, 4,200 imp gal (19,000 L; 5,000 US gal) water
Firebox:
  Firegrate area
25 34 sq ft (2.39 m2)
Boiler pressure 175 psi (12.1 bar; 1,210 kPa)
Heating surface 1,680 sq ft (156 m2)
Cylinders 2
Cylinder size 20 in × 26 in (508 mm × 660 mm)
Performance figures
Tractive effort 28,650 lbf (127,400 N) at 85% boiler pressure
Career
Number in class 53

The K class was a branch line steam locomotive that ran on Victorian Railways from 1922 to 1979. Although its design was entirely conventional and its specifications unremarkable, the K class was in practice a remarkably versatile and dependable locomotive. It went on to outlast every other class of steam locomotive in regular service on the VR, and no fewer than 21 examples of the 53 originally built have survived into preservation.

History

The K class was the first design from the VR Locomotive Design Section under the stewardship of Alfred E Smith as Chief Mechanical Engineer.[1]

The Locomotive Design Section had introduced successful mainline and branchline passenger locomotives with the A2 class and Dd class 4-6-0s, and had recently improved mainline goods services with the C class 2-8-0. They now turned their attention to a requirement for a more powerful branchline goods locomotive, and in 1922 produced a lighter 2-8-0 "Consolidation" locomotive with a 13 12 long tons (13.7 t; 15.1 short tons) axle load and 50 ft (15.24 m) wheelbase, able to run on even the lightest lines on the VR 5 ft 3 in (1,600 mm) system.

Regular service

K109 hauling the inaugural Better Farming Train in Gippsland in October 1924.

The K class is credited with working virtually every line in the VR system and hauling almost every kind of train.

A total of ten were built from 1922-23. They were put to work on goods services on steeply graded branch lines where their superior tractive effort (45% higher than that of the Dd class) and high factor of adhesion were put to good use.[2]

The design was modified in 1925 into the N class 2-8-2, in response to a new Victorian Railways policy that all new locomotives be capable of conversion from 5 ft 3 in (1,600 mm) to 4 ft 8 12 in (1,435 mm) standard gauge in the event of the Victorian Railways network being standardised. (The K, with its firebox mounted between the frames, was unsuitable for standard gauge conversion.)[2]

The K class proved to be such a successful locomotive than during World War II when the VR faced a shortage of motive power on the branchline network, it built a further 43 K class locomotives even though the K was not gauge convertible. The decision to build more Ks reflected their greater versatility: they had the same tractive effort as the N class but unlike the longer wheelbase N class the K could be turned on the smallest (53-foot or 16.15-metre) turntables.

Although originally designed as a goods locomotive, their maximum permissible speed was raised in the 1950s from 45 to 50 mph (72 to 80 km/h) for branchline passenger service, further increasing their versatility.[3]

The success of the K class was such that even in 1953, when dieselisation was already underway on Victorian Railways, the basic design of the K class was updated into the J class 2-8-0, the final class of steam locomotives to be introduced to the Victorian Railways.[2]

Design improvements

During the mid-1930s, the original batch of ten K class locomotives were equipped with VR's 'Modified Front End' for improved drafting and reduced cylinder back pressure. They also saw other improvements, such as the fitting of cross-compound air compressors, smoke deflectors and a new welded tender tank which incorporated a self-trimming coal bunker.

The last seven of the second order of K class locomotives built in 1940-46 were fitted with Boxpok wheels.

Demise

The introduction of the T class (EMD G8) diesel electric locomotive from 1955 onwards on VR's branchline network spelled the beginning of the end for the K class, with Ks gradually being retired as successive orders of Ts were delivered throughout the 1950s and into the 1960s. Even so, their reliable and low-cost operability ensured they remained in service around various yards and depots as shunters and workshop pilots until the Y class (EMD G6B) locomotive eventually superseded them in this role.

On 20 January 1965 locomotive K 188 was used in a public ending of steam on the Victorian Railways, when it was used in the demolition of the North Melbourne Locomotive Depot, pulling down the front wall with a steel rope before a crowd of onlookers.[4] North Ballarat Workshops pilot K 162 had the honour of being the last steam locomotive in service on Victorian Railways, withdrawn in March 1979, and was subsequently allocated to Steamrail Victoria.

Preservation

Preserved K 160 in operation on the Victorian Goldfields Railway, 19th December 2004

With the rail preservation movement well under way by the late 1960s, many ex-VR locomotives were sold to local councils for display in municipal parks or near railway stations. The K had a further advantage over other classes in this respect: because VR offered the locomotives for the price of their scrap value (plus the cost of freight to their eventual destination), the relatively lightweight K represented a comparatively cheap locomotive purchase. The large number of preserved K class locomotives is in stark contrast to the fate of VR's remaining fleet of 73 larger, heavier N class locomotives, all of which (other than the one example retained for display at the ARHS Railway Museum) were scrapped.

By the time VR announced the cessation of steam locomotive scrapping in 1978, no fewer than 21 of an original 53 K class locomotives remained in existence, making them in preservation the most numerous class of VR steam locomotives. However, none of the original batch of ten locomotives survives.

Operational

K 190 (at right) and a D3 class 4-6-0, 10 March 2007. The D3s were a highly successful rebuild of the original 1902-era Dd class, using a boiler design based on that the K.[2]

Three K class locomotives are currently in operation:

(K160 was in regular service on the Victorian Goldfields Railway until late 2012, at which point it was withdrawn from service pending a major overhaul, ending a 26 year stint in service.)

Static display

K 165 is preserved at the Australian Railway Historical Society Museum at North Williamstown.

In addition, K class locomotives are also preserved on public display at various locations:[5]

Stored or under restoration

The following K class locomotives are the subject of current restoration projects:

Until 2002, K 183 was also operated by Steamrail Victoria. On 13 October 2002 this locomotive was involved in a serious level crossing accident with a B-double semi-trailer near Benalla, Victoria, derailing after impact. Tragically, three people on the footplate died in the collision.[11] The locomotive was extensively damaged and is currently stored out of service.[5] As of 2013, the locomotive is still receiving insurance money from the accident in which will go towards the future restoration of the steam train to its former glory.[12]

In addition, K 151, 157, 159, 176, and 184 are currently stored. While some are potential restoration projects, others such as K 151 and K 157 are utilised as sources of spare parts to restore or maintain other K class locomotives.

Model railways

HO Scale

The VR K Class locomotive was previously available in HO Scale as a brass and Whitemetal kit, by Broad Gauge Models. There were also a limited production run of brass "Ready-to-Run" models produced by Precision Scale Models in the mid-1990s. A limited production run of brass "Ready-to-Run" models was produced by Trainbuilder in 2013/14. A plastic version is currently in development by Eureka Models and is due in 2015.

Trainbuilder has released a series of locomotives, including K150, 160, 164, 175, 186, 188 and 192 in black, and 183 in Steamrail's blue scheme and 190 in Steamrail's green scheme.[13][14]

N Scale

An N scale kit version is available from badgerbits using a MicroAce 9600 as a basis.

References

Specific

External links

This article is issued from Wikipedia - version of the Wednesday, September 02, 2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.