VSR SR-1 Snoshoo
| SR-1 Snoshoo | |
|---|---|
| Role | Homebuilt aircraft |
| National origin | United States |
| Manufacturer | VanMeter Smith Racing |
| Designer | Alan VanMeter and A.J. Smith |
| First flight | 1997 |
| Introduction | 1993 |
| Status | In production (2014) |
| Produced | 1993-present |
| Number built | At least one |
| Unit cost | |
The VSR SR-1 Snoshoo (English: Snowshoe) is an American homebuilt Formula One racing aircraft that was designed by Alan VanMeter and A.J. Smith and produced by VanMeter Smith Racing (VSR) of Wichita, Kansas. It was designed in 1993 and first flown in 1997. The aircraft is supplied in the form of plans for amateur construction, with some key parts available to speed construction.[2][3]
Design and development
The SR-1 Snoshoo features a cantilever mid-wing, a single-seat enclosed cockpit under a bubble canopy, fixed conventional landing gear with wheel pants and a single engine in tractor configuration.[2]
The aircraft fuselage is made from welded 4130 steel tubing covered in carbon-fiber-reinforced polymer fairings ahead of the wing and doped aircraft fabric aft. Its 19.91 ft (6.1 m) span wing is made from Sitka spruce wood, has no flaps and has a wing area of 66.00 sq ft (6.132 m2). The cockpit width is 22 in (56 cm). The acceptable power range is 95 to 100 hp (71 to 75 kW) and the standard engine used is the 100 hp (75 kW) Continental O-200A powerplant, as required by the Formula One rules. The aircraft is stressed to +/-8 g[2][3][4]
The SR-1 Snoshoo has a typical empty weight of 530 lb (240 kg) and a gross weight of 760 lb (340 kg), giving a useful load of 230 lb (100 kg). With full fuel of 6 U.S. gallons (23 L; 5.0 imp gal) the payload for the pilot and baggage is 200 lb (91 kg).[2][3]
The designers estimate the construction time from the supplied plans as 1500 hours.[2]
Operational history
By 1998 the company reported that 20 kits and sets of plans had been sold.[2]
In March 2014 one example was registered in the United States with the Federal Aviation Administration.[5]
Specifications (SR-1 Snoshoo)
Data from AeroCrafter and VSR[2][3][4]
General characteristics
- Crew: one
- Length: 17.91 ft (5.46 m)
- Wingspan: 19.91 ft (6.07 m)
- Height: 4 ft 1 in (1.24 m)
- Wing area: 66.00 sq ft (6.132 m2)
- Aspect ratio: 6.01:1
- Empty weight: 530 lb (240 kg)
- Gross weight: 760 lb (345 kg) (746 lbs (338 kg) for racing)
- Fuel capacity: 6 U.S. gallons (23 L; 5.0 imp gal)
- Powerplant: 1 × Continental O-200A four cylinder, air-cooled, four stroke aircraft engine, 100 hp (75 kW)
- Propellers: 2-bladed wooden, fixed pitch
Performance
- Maximum speed: 280 mph (451 km/h; 243 kn)
- Cruise speed: 220 mph (191 kn; 354 km/h)
- Stall speed: 65 mph (56 kn; 105 km/h)
- Never exceed speed: 350 mph (304 kn; 563 km/h)
- G limits: +/-8
- Rate of climb: 2,500 ft/min (13 m/s)
- Wing loading: 11.5 lb/sq ft (56 kg/m2)
References
- ↑ VanMeter Smith Racing (2014). "SR-1 Snoshoo pricing". Retrieved 26 March 2014.
- 1 2 3 4 5 6 7 Purdy, Don: AeroCrafter - Homebuilt Aircraft Sourcebook, Fifth Edition, page 280. BAI Communications, 15 July 1998. ISBN 0-9636409-4-1
- 1 2 3 4 VanMeter Smith Racing (1994). "SR-1 Snoshoo drawing" (PDF). Retrieved 26 March 2014.
- 1 2 VanMeter Smith Racing (2014). "SR-1 Snoshoo". Retrieved 26 March 2014.
- ↑ Federal Aviation Administration (26 March 2014). "Make / Model Inquiry Results". Retrieved 26 March 2014.