Uyghur alphabets

Uyghur is a Turkic language with a long literary tradition spoken in Xinjiang, China by the Uyghurs. Today, the Uyghur Arabic alphabet is the official writing system used for Uyghur in Xinjiang, but other alphabets - the Ughur Latin and Uyghur Cyrillic alphabets - are still in use, especially outside Xinjiang.

History

Old Uyghur and Modern Uyghur

The Old Uyghur language and Modern Uyghur are distinct Turkic languages and are not different stages of the same language. The Old Uyghur language is ancestral to Western Yugur, while modern Uyghur is descended from one of the Karluk languages.

Old Uyghur alphabets

5th to 18th century

In the 5th century Old Uyghur was written for the first time using the Sogdian alphabet. This fell out of use during the 10th century, when it evolved into the Old Uyghur alphabet, although it was taken into use again between the 15th and 16th century. While the Sogdian alphabet was still in use, it was written with the Old Turkic alphabet from the 6th-9th centuries.

The Old Uyghur language evolved into the modern Western Yugur, and remained in use until the 18th century among the Yugur.

Modern Uyghur alphabets

10th century to 19th century

An Arabic alphabet introduced along with Islam in the 10th century to the Karluk Kara Khanids, which evolved into the modern day Uyghur Arabic alphabet.

The Arabic-derived alphabet taken into use first came to be the so-called Chagatai script, which was used for writing the Chagatai language and the Turki (modern Uyghur) language, but fell out of use in the early 1920s, when the Uyghur-speaking areas variously became a part of, or under the influence of, the Soviet Union.^[1]

The Chagatai alphabet was known as Ⱪona Yeziⱪ ("Old script") (Kona Yëziq).

The Syriac alphabet has also been used for writing Old Uyghur at some time between the 5th century and 19th century.^[2]

20th to 21st century

MS Windows Uyghur keyboard layout. Note that vowels are still using the older abjab from the Arabic script, and not the newer plain letters for vowels of the Uyghur Arabic alphabet (composed of pairs of Arabic letters, starting by an alef with hamza, that must be entered separately on this keyboard before the actual vowel). In fact, the keyboard is also based on the older Latin alphabet used for the mixed Uyghur New Script and does not allow entering all vowels correctly for the current Arabic alphabet.

The writing of Uyghur saw many changes during the 20th century mostly to do political decisions, both from the Soviet and Chinese side. The Soviet Union first tried to romanize the writing of the language, but soon after decided to promote a Cyrillic script during the late 1920s known as the Uyghur Cyrillic alphabet, fearing that a romanization of the language would strengthen the relationship of the Uyghurs with other Turkic peoples.

With the establishment of the People's Republic of China in 1949, the promotion of a Cyrillic script began, but when the tensions between the Soviet Union and China grew during the late 1950s, the Chinese devised a new alphabet based upon Pinyin and Cyrillic (with some letters borrowed from the Soviet's Uniform Turkic Alphabet – a Cyrillic-influenced Latin alphabet, with Latin letters like Ə, Ƣ, Ⱨ, Ɵ, etc.), which is known as the Uyghur New Script and promoted this instead, and which soon became the official alphabet of usage for almost 10 years.

Due to the unpopularity of Pinyin for Uyghur, the Arabic alphabet was reinstated in a modified form as the Uyghur Arabic alphabet. However, due to the increasing importance of information technology, there have been requests for a Latin alphabet, for easier use on computers. This resulted in five conferences between 2000 and 2001, where a Latin-derived alphabet was devised known as the Uyghur Latin alphabet.^[3]

Present situation

Comparative current alphabets: Arabic-Script Uyghur, Latin-Script Uyghur;
Uyghur Ereb Yëziqi, Uyghur Latin alphabet sëlishturma ëlipbesi.

Today the Uyghur language is being written using four different alphabets.

• ‘’UEY’', the Uyghur Arabic alphabet: the newest Arabic-based ئۇيگئۇر ئەرئەب يئېژئىكئى‎ or (now a true alphabet, not an abjad), or
• ‘’USY, the Uyghur Cyrillic alphabet: the older Cyrillic-based Уйғур Сирил Ёзики
• UYY: the older mixed Uyghur New Script, also called Pinyin Yeziⱪi UPNY
• ULY: the newest Uyghur Latin alphabet

In the table below, the alphabets are shown side-by-side for comparison, together with a phonetic transcription in the International Phonetic Alphabet. It is only grouped by phonemic proximity; each alphabet has its own sort order. Some letter forms used for words borrowed (notably proper names) from other languages, or kept occasionally from older orthographic conventions, are shown between parentheses.

A monument in Niya (Minfeng) with inscriptions in Chinese and Romanized Uyghur

As it can be seen, the Uyghur Arabic alphabet, Uyghur New Script and Uyghur Latin alphabet each have a total of 32 letters (including one digraph for NG/ng in the two Latin-based alphabets, plus four digraphs in ULY). There may still exist differences in texts using the newer Latin orthography, where the standard choice of ⟨ë⟩ is sometimes written ⟨é⟩ instead, with the acute accent instead of the standardized diaeresis: this should not make any difference in Uyghur.

The Uyghur Cyrillic alphabet has three additional letters, the Cyrillic soft letters/ligatures ⟨ё⟩, ⟨ю⟩, and ⟨я⟩, representing /je/, /jo/, and /ja/, respectively, which are written with independent consonant+vowel in the other alphabets. Some words may still use the Cyrillic soft sign. Also, loanwords of Russian origin are often spelled as they are in Russian, and thus not adapted to the Uyghur orthography.^[4]

Another notable feature of the Uyghur New Script was the use of the letter ⟨ƣ⟩ to represent /ʁ/ (sometimes incorrectly rendered as /ɣ/). This letter has erroneously been named LATIN LETTER OI in Unicode, although it is correctly referred to as gha^[5] and replaced by the digraph ⟨gh⟩ in the newer Uyghur Latin alphabet.

In the Uyghur Latin alphabet, only the Basic Latin base alphabet is needed, with the common diaeresis (umlaut) being the only diacritic added above vowels, and supported in many fonts and encoding standards. The letter ⟨c⟩ is only used in the ⟨ch⟩ digraph, and the letter ⟨v⟩ is normally not used, except in loanwords where the difference between /v/ and /w/ is needed for correct pronunciation and distinctions. The /ʒ/ may be interchangeably represented in two ways, either as ⟨zh⟩ or as ⟨j⟩, although the latter is also used for /dʒ/ (which is normally inferred contextually in Uyghur, and only needed as a separate letter for loanwords needing the distinction). In the Arabic and Cyrillic orthographies, the distinction of /dʒ/ is only seen as a graphic variant of /ʒ/, reducing the Latin alphabet to only 31 effective letters. This variation is due to several opposing arguments, and therefore it was accepted that both are acceptable, as long as no semantic distinction is necessary.^[6]

One of the major differences among the four alphabets is the rules of when the glottal stop /ʔ/ is written. In Uyghur Arabic alphabet it is consistently written, using the hamza on a tooth ⟨ﺋ⟩, also at the beginning of words. However, in that case, that Arabic letter is not considered as a separate letter in Uyghur, but as the holder of the Arabic vowel that follows, without pronouncing the glottal stop itself, but only a hiatus (that separates vowels instead of creating diphthongs, the only diphthongs being those formed with /j/ and /w/, viewed as consonants starting a separate syllable in Uyghur). However, some words of Arabic origins won't always be using this tool (that transforms the Arabic script into a true alphabet with plain vowels in Uyghur, and not an abjad).

In Uyghur Cyrillic alphabet and Uyghur New Script|Uyghur New Script, the glottal stop was only written word-medially, using an apostrophe ⟨’⟩, but it is not required and thus not very consistent.

And finally, in Uyghur Latin alphabet, the glottal stop is written between consonants and vowels, also using an apostrophe but consistently, and also to separate ⟨gh⟩, ⟨ng⟩, ⟨sh⟩, and ⟨zh⟩ when these represent two phonemes and not digraphs for single consonants; for instance, consider the Uyghur word bashlan’ghuch, pronounced /bɑʃlɑnʁutʃ/ and meaning beginning, which would have been pronounced /bɑʃlɑŋhutʃ/ without the apostrophe.

Example

Below is the same text in Uyghur, but written using each of the four alphabets in common use today.

The text is taken from the first article of the Universal Declaration of Human Rights.^[2]

References

Notes

General

External links

• A JavaScript-based web tool for converting among multiple Uyghur scripts
• Web tool for converting between Uyghur alphabets