USS ARD-10
| History | |
|---|---|
 United States
| |
| Name: | USS ARD-10 |
| Builder: | Pacific Bridge Company |
| Commissioned: | October 1943 |
| Decommissioned: | Unknown |
| Fate: | Unknown |
| Status: | operational as of 2013 |
| General characteristics | |
| Class & type: | ARD-2-class auxiliary repair dock |
| Displacement: | 4,200 tons (light) |
| Length: | 482 ft 7 in (147.09 m) |
| Beam: | 71 ft (22 m) |
| Draft: | 5 ft (1.5 m) |
| Complement: | 131 |
| Armament: | 2 x 20mm |
USS ARD-10 was an auxiliary repair dock in the service of the United States Navy in World War II. As was common with other auxiliary repair docks, it was only known by its designation and was not otherwise named.
ARD-10 was commissioned in Alameda, California in October 1943 under command of Lieutenant Commander H. P. MacAuliff. She was towed by Yuma (ATF-94) from San Francisco, California on 12 December 1943 first to Sydney Australia and then on to Melbourne 1 February 1944. Yuma and ARD-10 finally arrived at Fremantle, Western Australia, on 6 March 1944. There ARD-10 served the submarine base located there until end of the war.
ARD-10 returned to the United States after the end of World War II in 1946 and was stricken from US Navy service in July, 1972 and subsequently Sold to Bendershipbuilding Repair Co. In Mexico and today February 06th 2013 Still Operational
ARD 10 was a member of the ARD 2 class of Auxiliary Repair Drydocks (ARD). The ARD 2 Class of drydocks dates to early World War II and were towed to where they were needed most, generally forward area anchorages. Five of the 7 ARD 2 class drydocks built are still in existence in foreign navies. The 486-foot-long (148 m) ARD could handle World War II era ships up to destroyer size.
References
| ||||||||||||||||||||||
Commanding Officers
01 LCDR. MacAuliff, Howard P. 6 October 1943 - 2 October 1945 02 LT. Steel, Andrew 2 October 1945 - March 1946 03 LT. Maxwell, Robert W. March 1946 = 30 June 1946